EN 10113-3:1993
(Main)Hot-rolled products in weldable fine grain structural steels - Part 3: Delivery conditions for thermomechanical rolled steels
Hot-rolled products in weldable fine grain structural steels - Part 3: Delivery conditions for thermomechanical rolled steels
Part 3 of this European Standard, in addition to part 1, specifies requirements for flat products with nominal thickness ¿ 63 mm and long products with nominal thickness ¿ 150 mm of hot-rolled weldable fine grain structural steel in the thermomechanical rolled condition in the grades and qualities given in table 1 (chemical composition) and tables 3, 4 and 5 (mechanical properties).
Warmgewalzte Erzeugnisse aus schweißgeeigneten Feinkornbaustählen - Teil 3: Lieferbedingungen für thermomechanisch gewalzte Stähle
Der Teil 3 dieser europäischen Norm enthält in Verbindung mit Teil 1 die Anforderungen an Flacherzeugnisse in Nenndicken <= 63 mm und Langerzeugnisse in Nenndicken <= 150 mm aus warmgewalzten schweissgeeigneten Feinkornbaustählen der Sorten und Gütegruppen nach den Tabelle 1 und 2 (chemische Zusammensetzung) sowie nach den Tabellen 3 bis 5 (mechanische Eigenschaften) im thermomechanischen gewalzten Zustand.
Produits laminés à chaud en aciers de construction soudable à grains fins - Partie 3: Conditions de livraison des aciers obtenus par laminage thermomécanique
La présente partie 3 de la norme européenne vient s'ajouter à la partie 1 et spécifie les caractéristiques des produits plats d'épaisseur nominale <= 63 mm et des produits longs d'épaisseur <= 150 mm en aciers de construction soudables à grains fins laminés à chaud livrés à l'état de laminage thermomécanique et dans les nuances et qualités données au tableau 1 (pour la composition chimique), et aux tableaux 3, 4 et 5 (pour les caractéristiques mécaniques).
Vroče valjani izdelki iz varivih drobnozrnatih konstrukcijskih jekel - 3. del: Dobavni pogoji za termomehansko valjana jekla
General Information
- Status
- Withdrawn
- Publication Date
- 08-Mar-1993
- Withdrawal Date
- 09-Nov-2004
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Nov-2004
- Completion Date
- 10-Nov-2004
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10113-3:1993 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot-rolled products in weldable fine grain structural steels - Part 3: Delivery conditions for thermomechanical rolled steels". This standard covers: Part 3 of this European Standard, in addition to part 1, specifies requirements for flat products with nominal thickness ¿ 63 mm and long products with nominal thickness ¿ 150 mm of hot-rolled weldable fine grain structural steel in the thermomechanical rolled condition in the grades and qualities given in table 1 (chemical composition) and tables 3, 4 and 5 (mechanical properties).
Part 3 of this European Standard, in addition to part 1, specifies requirements for flat products with nominal thickness ¿ 63 mm and long products with nominal thickness ¿ 150 mm of hot-rolled weldable fine grain structural steel in the thermomechanical rolled condition in the grades and qualities given in table 1 (chemical composition) and tables 3, 4 and 5 (mechanical properties).
EN 10113-3:1993 is classified under the following ICS (International Classification for Standards) categories: 77.140.10 - Heat-treatable steels. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10113-3:1993 has the following relationships with other standards: It is inter standard links to EN 10025-4:2004, EN 10025-1:2004, CR 10313:2000, EN 14015:2004; is excused to EN 10113-1:1993. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10113-3:1993 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/86/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10113-3:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgewalzte Erzeugnisse aus schweißgeeigneten Feinkornbaustählen - Teil 3: Lieferbedingungen für thermomechanisch gewalzte StähleProduits laminés a chaud en aciers de construction soudable a grains fins - Partie 3: Conditions de livraison des aciers obtenus par laminage thermomécaniqueHot-rolled products in weldable fine grain structural steels - Part 3: Delivery conditions for thermomechanical rolled steels77
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...