EN 459-3:2001

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gradbeno apno – 3. del: Ovrednotenje skladnostiBaukalk - Teil 3: KonformitätsbewertungChaux de construction - Partie 3: Evaluation de la conformitéBuilding lime - Part 3: Conformity evaluation91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 459-3:2001SIST EN 459-3:2002en01-april-2002SIST EN 459-3:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 459-3October 2001ICS 91.100.10English versionBuilding lime - Part 3: Conformity evaluationChaux de construction - Partie 3: Evaluation de laconformitéBaukalk - Teil 3: KonformitätsbewertungThis European Standard was approved by CEN on 16 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 459-3:2001 ESIST EN 459-3:2002

ScopeThis European Standard specifies the scheme for the evaluation of conformity of building lime to their correspondingproduct standard EN 459-1:2001 including declaration of conformity by the manufacturer.The European Standard provides technical rules for factory production control by the manufacturer, includingautocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity, theprocedure for the declaration and requirements for dispatching centres.2
Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanPrestandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 459-1:2001, Building lime - Part 1: Definitions, specifications and conformity criteria.EN 459-2:2001, Building lime - Part 2: Test methods.3
Terms and definitionsFor the purposes of this European Standard the following terms and definitions apply.3.1declaration of conformitydocument issued by the manufacturer under the rules of this scheme for the evaluation of conformity indicating thatadequate confidence is provided that building lime is in conformity with EN 459-1:20013.2conformity markingprotected marking applied on the basis of the declaration of conformity (see 3.1)3.3declared building limebuilding lime for which a declaration of conformity (see 3.1) has been issued3SIST EN 459-3:2002

Management system4.1.3.1
Quality policyThe works' quality documentation shall include a statement by management defining its policy, objectives andcommitments to the attainment of product quality.4.1.3.2
Management representativeThe manufacturer shall appoint a management representative who, irrespective of other responsibilities, shall havedefined authority and responsibility for ensuring that the requirements of this scheme for the evaluation of conformityare implemented and maintained.4.1.3.3
Management reviewThe manufacturer shall review the factory production control at appropriate intervals as specified in the works' qualitydocumentation at least once every two years in order to ensure its continuing suitability and effectiveness to meetthe requirements of this scheme for the evaluation of conformity.4.1.3.4
TrainingThe Works' quality documentation shall describe the measures taken to ensure that all the personnel involved inoperations that can affect factory production control and product quality have appropriate experience or training.Appropriate records shall be retained.5SIST EN 459-3:2002

Document controlThe management representative shall be responsible for the control of all documents and data related to factoryproduction control and to this scheme for the evaluation of conformity.This control shall ensure that the current issues of appropriate documents are available at essential locations.A master list shall be established to identify the current revision of documents in order to prevent the use of obsoletedocuments.4.1.4.2
Quality recordsThe manufacturer shall retain
...