EN 15655-1:2018
(Main)Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
This European Standard defines the requirements and test methods applicable to factory applied internal polyurethane high duty corrosion protection of buried ductile iron pipes and fittings conforming to EN 545, EN 598 and EN 969 for use at permanent operating temperatures up to 45 °C
Rohre, Formstücke und Zubehörteile aus duktilem Gusseisen - Anforderungen und Prüfverfahren für organische Auskleidungen von Rohren und Formstücken aus duktilem Gusseisen - Teil 1: Polyurethan-Auskleidung von Rohren und Formstücken
Diese Europäische Norm legt die Anforderungen und Prüfverfahren fest für werksseitig aufgebrachte Aus-kleidungen aus Polyurethan für den Korrosionsschutz bei starker Beanspruchung von beschichteten Rohren und Formstücken aus duktilem Gusseisen nach EN 545, EN 598 und EN 969 für den Einsatz bei Betriebs-temperaturen bis 45 °C.
Tuyaux, raccords et accessoires en fonte ductile - Prescriptions et méthodes d’essai relatives aux revêtements organiques des tuyaux et raccords en fonte ductile - Partie 1 : Revêtement en polyuréthane des tuyaux et raccords
La présente Norme européenne établit les exigences et les méthodes d'essais applicables aux revêtements intérieurs en polyuréthane, appliqués en usine, et destinés à fournir une protection renforcée contre la corrosion pour les tuyaux et raccords en fonte ductile conformes à l'EN 545, l'EN 598 et l'EN 969, utilisables à des températures de service permanentes allant jusqu'à 45 °C.
Cevi, fitingi in pribor iz duktilne železove litine - Zahteve in preskusne metode za notranje organske prevleke cevi in fitingov iz duktilne železove litine - 1. del: Poliuretanska prevleka cevi in fitingov
Ta evropski standard določa zahteve in preskusne metode, ki veljajo za tovarniško naneseno notranjo poliuretansko visoko odporno protikorozijsko prevleko zakopanih cevi iz duktilne železove litine in fitingov v skladu s standardi EN 545, EN 598 in EN 969 za uporabo pri stalnih delovnih temperaturah do 45 °C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevi, fitingi in pribor iz duktilne železove litine - Zahteve in preskusne metode za notranje organske prevleke cevi in fitingov iz duktilne železove litine - 1. del: Poliuretanska prevleka cevi in fitingovRohre, Formstücke und Zubehörteile aus duktilem Gusseisen - Anforderungen und Prüfverfahren für organische Auskleidungen von Rohren und Formstücken aus duktilem Gusseisen - Teil 1: Polyurethan-Auskleidung von Rohren und FormstückenTuyaux, raccords et accessoires en fonte ductile - Exigences et méthodes d'essais relatives aux revêtements organiques des tuyaux et raccords en fonte ductile - Partie 1 : Revêtement en polyuréthane des tuyaux et raccordsDuctile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings23.040.40Kovinski fitingiMetal fittings23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 15655-1:2018SIST EN 15655-1:2019en,fr,de01-marec-2019SIST EN 15655-1:2019SLOVENSKI
STANDARDSIST EN 15655:20091DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15655-1
December
t r s z ICS
t uä r v rä s râ
t uä r v rä v r Supersedes EN
s w x w wã t r r {English Version
Ductile iron pipesá fittings and accessories æ Requirements and test methods for organic linings of ductile iron pipes and fittings æ Part
sã Polyurethane lining of pipes and fittings Tuyauxá raccords et accessoires en fonte ductile æ Prescriptions et méthodes d 5essai relatives aux revêtements organiques des tuyaux et raccords en fonte ductile æ Partie
s ã Revêtement en polyuréthane des tuyaux et raccords
Rohreá Formstücke und Zubehörteile aus duktilem Gusseisen æ PolyurethanæAuskleidung von Rohren und Formstücken æ Anforderungen und Prüfverfahren This European Standard was approved by CEN on
{ November
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w x w wæ sã t r s z ESIST EN 15655-1:2019
Quality assurance . 17 A.1 General . 17 A.2 Performance test - DN grouping . 19 A.3 Quality assessment system . 19 Annex B (informative)
Lining process and materials . 20 B.1 Lining application process . 20 B.2 Material properties . 20 B.2.1 General . 20 B.2.2 Polyurethane . 20 B.2.3 Epoxy resin . 21 B.3 Field of use, characteristics of transported waters . 21 B.4 Jet cleaning . 21 Annex C (informative)
Packaging. 22 Bibliography . 23
addition to informative annex that the manufacturer should provide infrared scans. According to the CEN-CENELE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.