Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005)

ISO 9100-1:2005 specifies the types of vacuum lug finishes for glass containers for ISO 9100-2 to ISO 9100-14.

Glasbehälter - Vakuum-Nockenverschluss-Mündungen - Teil 1: Allgemeines (ISO 9100-1:2005)

Récipients en verre - Bagues à crans pour bouchage sous vide - Partie 1: Généralités (ISO 9100-1:2005)

L'ISO 9100-1:2005 spécifie les dimensions des bagues à crans pour bouchage sous vide des récipients en verre de l'ISO 9100-2 à l'ISO 9100-14.

Steklena embalaža – Grla za vakuumsko zapiranje 1. del: Splošno (ISO 9100-1:2005)

General Information

Status
Published
Publication Date
14-Jan-2005
ICS
55.100 - Bottles. Pots. Jars
Technical Committee
CEN/TC 261 - Packaging
Drafting Committee
CEN/TC 261/SC 5/WG 21 - Glass packaging
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
23-Oct-2009
Completion Date
23-Oct-2009
Directive
80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
Ref Project
SIST EN ISO 9100-1:2005 - Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005)

Overview

EN ISO 9100-1:2005 - Glass containers - Vacuum lug finishes - Part 1: General is the general (introductory) part of the ISO 9100 series adopted by CEN. It defines the scope and the types of vacuum lug finishes used on glass bottles, jars and pots and provides the framework for the subsequent parts (EN/ISO 9100-2 to EN/ISO 9100-14), each of which details individual finish sizes and profiles. This Part 1 is intended as the reference that identifies the finish types and the structure of the series for manufacturers, designers and specifiers.

Key topics and requirements

  • Scope definition: Specifies that Part 1 covers the types of vacuum lug finishes applicable to the rest of the ISO 9100 series.
  • Finish type listing: Identifies which finish sizes/types are covered in each part of the series (examples from the document):
    • prEN ISO 9100-2: 33 medium
    • prEN ISO 9100-3: 38 regular
    • prEN ISO 9100-4: 38 medium
    • EN ISO 9100-5: 43 and 48 regular
    • EN ISO 9100-6: 53 and 58 regular
    • EN ISO 9100-7: 58 deep
    • EN ISO 9100-8 / -9: 63, 66 and 70 (regular / deep)
    • EN ISO 9100-10 to -14: 77, 82, 89, 100, 110 regular
  • Series structure: Indicates that parts 2–14 describe the detailed geometries and specifications for each finish; Parts 2–4 were under preparation at the time of publication and additional sizes (e.g., 27 regular, 30 medium) may be added later.
  • Standards context: Prepared by CEN/TC 261 (Packaging) in collaboration with ISO/TC 63 (Glass containers); harmonized across CEN member countries.

Applications

  • Glass container manufacturers: Use the standard series to design and produce consistent vacuum lug finishes for bottles, jars and pots.
  • Closure and lid manufacturers: Ensure closure designs (vacuum lids, caps, sealing systems) are compatible with standardized lug finishes.
  • Packaging engineers and product designers: Specify finish types in product requirements to ensure fit, sealing performance and interchangeability.
  • Procurement and quality teams: Reference the standard for supplier contracts, inspection criteria and quality control.
  • Regulatory and conformity assessment: Adopt the standardized finish taxonomy to demonstrate compliance and consistency across European markets.

Related standards

  • EN/ISO 9100 series parts 2–14 (individual finish geometries and dimensions)
  • Documents from ISO/TC 63 (Glass containers) and CEN/TC 261 (Packaging)

Keywords: EN ISO 9100-1:2005, vacuum lug finishes, glass containers, packaging standards, closure compatibility, ISO 9100 series.

Frequently Asked Questions

EN ISO 9100-1:2005 is a standard published by the European Committee for Standardization (CEN). Its full title is "Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005)". This standard covers: ISO 9100-1:2005 specifies the types of vacuum lug finishes for glass containers for ISO 9100-2 to ISO 9100-14.

ISO 9100-1:2005 specifies the types of vacuum lug finishes for glass containers for ISO 9100-2 to ISO 9100-14.

EN ISO 9100-1:2005 is classified under the following ICS (International Classification for Standards) categories: 55.100 - Bottles. Pots. Jars. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 9100-1:2005 is associated with the following European legislation: EU Directives/Regulations: 80/232/EEC, 87/356/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase EN ISO 9100-1:2005 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklena embalaža – Grla za vakuumsko zapiranje 1. del: Splošno (ISO 9100-1:2005)Glasbehälter - Vakuum-Nockenverschluss-Mündungen - Teil 1: Allgemeines (ISO 9100-1:2005)Récipients en verre - Bagues a crans pour bouchage sous vide - Partie 1: Généralités (ISO 9100-1:2005)Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005)55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN ISO 9100-1:2005SIST EN ISO 9100-1:2005en,fr,de01-marec-2005SIST EN ISO 9100-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 9100-1January 2005ICS 55.100English versionGlass containers - Vacuum lug finishes - Part 1: General (ISO9100-1:2005)Récipients en verre - Bagues à crans pour bouchage sousvide - Partie 1: Généralités (ISO 9100-1:2005)Glasbehälter - Vakuum-Nockenverschluss-Mündungen -Teil 1: Allgemeines (ISO 9100-1:2005)This European Standard was approved by CEN on 23 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 9100-1:2005: ESIST EN ISO 9100-1:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...