EN ISO 19066-1:2014
(Main)Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014)
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014)
ISO 19066-1:2014 establishes a system of designation for methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials, which can be used as the basis for specifications. The types of MABS plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties
a) Vicat softening temperature,
b) melt volume-flow rate,
c) Charpy notched impact strength, and
d) tensile modulus,
and on information about composition, intended application and/or method of processing, important properties, additives, colorants, fillers, and reinforcing materials.
Kunststoffe - Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Formmassen - Teil 1: Bezeichnungssystem und Basis für Spezifikationen (ISO 19066-1:2014)
In diesem Teil von ISO 19066 wird ein Bezeichnungssystem für thermoplastische Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Formmassen festgelegt, das als Grundlage für Spezifikationen dienen kann.
MABS-Formmasse-Typen werden mit Hilfe eines Einteilungssystems voneinander unterschieden, das auf geeigneten Wertebereichen der kennzeichnenden Eigenschaften:
a) Vicat-Erweichungstemperatur;
b) Schmelze-Volumenfließrate;
c) Charpy-Kerbschlagzähigkeit;
d) Zug-Modul;
und auf Informationen über Zusammensetzung, vorgesehene Anwendung und/oder Verarbeitungsverfahren, wichtige Eigenschaften, Additive, Farbstoffe, Füll- und Verstärkungsstoffe beruht.
Dieser Teil von ISO 19066 ist anwendbar auf alle Methylmethacrylat-Acrylnitril-Butadien-Styrol-Formmassen mit einer kontinuierlichen Phase vorwiegend auf der Basis von Copolymeren des Styrols (und/oder alkylsubstituierten Styrols), Acrylnitrils und Methylmethacrylats und einer dispersen elastomeren Phase auf der Basis von Butadien.
Er gilt für gebrauchsfertige MABS-Formmassen in Form von Pulver, Granulaten oder Pellets, nicht modifiziert oder modifiziert mit Farbstoffen, Additiven, Füllstoffen usw.
Es soll nicht unterstellt werden, dass Formmassen mit gleicher Bezeichnung notwendigerweise auch das gleiche Leistungsverhalten aufweisen. Dieser Teil von ISO 19066 enthält keine technischen Daten, Leistungsangaben oder Daten zu Verarbeitungsbedingungen, die möglicherweise notwendig sind, um eine Formmasse für eine spezielle Anwendung und/oder ein bestimmtes Verarbeitungsverfahren zu spezifizieren.
Wenn derartige zusätzliche Eigenschaften erforderlich sind, müssen sie, soweit möglich, in Übereinstimmung mit den in ISO 10366-2 festgelegten Prüfverfahren bestimmt werden.
Um eine thermoplastische Formmasse für eine bestimmte Anwendung zu spezifizieren oder eine reproduzierbare Verarbeitung sicherzustellen, dürfen zusätzliche Anforderungen im Daten-Block 5 festgelegt werden (siehe 3.1).
Plastiques - Matériaux plastique (méthacrylate de méthyle)-acrylonitrile-butadiène-styrène (MABS) pour moulage et extrusion - Partie 1: Système de désignation et base de spécifications (ISO 19066-1:2014)
L'ISO 19066-1:2014 établit un système de désignation des matériaux plastiques (méthacrylate de méthyle)-acrylonitrile-butadiène-styrène (MABS) pour moulage et extrusion qui peut être utilisé comme base pour les spécifications. Les types de plastiques MABS sont différenciés les uns des autres par un système de classification fondé sur des niveaux appropriés des propriétés de désignation:
a) température de ramollissement Vicat,
b) indice de fluidité à chaud en volume,
c) résistance au choc Charpy avec entaille, et
d) module de traction,
et des informations concernant la composition, l'application prévue et/ou la méthode de mise en ?uvre, les propriétés importantes, les additifs, les colorants, les charges et les matériaux de renfort.
Polimerni materiali - Materiali za oblikovanje in ekstrudiranje na osnovi metilmetakrilat-akrilonitril-butadien-stirena (MABS) - 1. del: Sistem označevanja in podlage za specifikacije (ISO 19066-1:2014)
Ta del standarda ISO 19066 določa sistem označevanja materialov za oblikovanje in ekstrudiranje na osnovi metilmetakrilat-akrilonitril-butadien-stirena (MABS), ki jih je mogoče uporabiti kot podlago za specifikacije.
Vrste polimernih materialov na osnovi metilmetakrilat-akrilonitril-butadien-stirena se ločujejo glede na sistem razvrščanja, ki temelji na ustreznih ravneh označevalnih lastnosti:
a) temperaturi zmehčišča po Vicatu,
b) prostorninskem pretoku taline,
c) zarezni udarni žilavosti po Charpyju,
d) nateznih modulih
in informacijah o sestavi, nameravani uporabi in/ali metodi obdelave, pomembnih
lastnostih, aditivih, barvilih, polnilih ter materialih za ojačanje.
Ta del standarda ISO 19066 se uporablja za vse materiale na osnovi metilmetakrilat-akrilonitril-butadien-stirena,
ki so sestavljeni iz snovnega polnila na osnovi stirenskega kopolimera (in/ali alkil nadomestnega
stirena), akrilonitrila in metilmetakrilata ter razpršenega polnila iz elastomera na osnovi butadiena.
Uporablja se za materiale na osnovi metilmetakrilat-akrilonitril-butadien-stirena v obliki praška, granul ali peletov, pripravljene za običajno uporabo, nespremenjene ali spremenjene z barvili, aditivi, polnili itd.
Materiali z enako oznako nimajo nujno tudi enakih lastnosti. Ta del standarda ISO 19066 ne zagotavlja inženirskih podatkov, podatkov o delovanju ali podatkov o
pogojih obdelave, ki so morda potrebni za določitev materiala za določeno uporabo in/ali
metodo obdelave.
Če so take dodatne lastnosti zahtevane, se določijo v skladu s preskusnimi metodami
iz standarda ISO 10366-2, če je to primerno.
Da bi se določil termoplastični material za določeno uporabo ali da bi se zagotovila obnovljiva obdelava, je mogoče v podatkovnem bloku 5 navesti dodatne zahteve (glejte 3.1).
General Information
- Status
- Published
- Publication Date
- 14-Oct-2014
- Withdrawal Date
- 29-Apr-2015
- Technical Committee
- CEN/TC 249 - Plastics
- Drafting Committee
- CEN/TC 249 - Plastics
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 15-Oct-2014
- Completion Date
- 15-Oct-2014
Relations
- Effective Date
- 22-Oct-2014
Overview
EN ISO 19066-1:2014 - Plastics: MABS moulding and extrusion materials (Part 1) defines a standardized designation system and the basis for specifications for methyl methacrylate‑acrylonitrile‑butadiene‑styrene (MABS). The standard applies to MABS materials in powder, granule or pellet form (unmodified or with colorants, additives, fillers or reinforcements) intended for moulding and extrusion. EN ISO 19066-1:2014 replaces and simplifies the previous ISO 10366-1 system and aligns identification more closely with ISO 1043 and ISO 11469.
Key topics and requirements
- Designation structure: a standardized identity block plus an individual‑item block subdivided into five data blocks (1–5). The individual item starts with a hyphen and data blocks are comma‑separated; unused blocks are indicated by two commas (,,).
- Data block 1 - Composition: identifies the polymer as MABS (ISO 1043‑1) and adds a single code letter (A–D) that indicates the ranges of acrylonitrile (AN) and methyl methacrylate (MMA) content.
- Data block 2 - Fillers and reinforcements: codes for filler/reinforcing material type and form (per ISO 1043‑2) and nominal mass content (e.g., GF25 for 25 % glass fibre). Mixed fillers use “( … )” notation with total content.
- Data block 3 - Application/processing and additives: codes for intended application or processing method (position 1) and positions 2–8 for important properties, additives or supplementary information.
- Data block 4 - Designatory properties: classification levels for the critical designatory properties used to differentiate MABS types:
- Vicat softening temperature
- Melt volume‑flow rate (MVR)
- Charpy notched impact strength
- Tensile modulus
- Data block 5 - Additional specification data: optional details for contractual specifications or manufacturing requirements.
- Limitations: the standard provides a designation and classification basis but does not supply engineering performance data or processing conditions; additional properties or test methods are to be determined per ISO 10366‑2 where applicable.
Applications and users
EN ISO 19066-1:2014 is used by:
- Material suppliers and compounders for consistent product identification and data sheets
- Designers and product engineers specifying MABS for parts made by injection moulding or extrusion
- Purchasing and quality management teams to define contract specifications
- Test laboratories and certification bodies for material classification and traceability
- Standards committees and regulatory bodies harmonizing material marking and labelling
Practical benefits include clearer material communication across the supply chain, simplified marking in line with ISO 1043/11469, and a reproducible basis for creating technical specifications for MABS moulding and extrusion materials.
Related standards
- ISO 1043‑1, ISO 1043‑2 (plastic identification symbols)
- ISO 11469 (generic material marking)
- ISO 10366‑2 (test specimen preparation and property determination for MABS)
Frequently Asked Questions
EN ISO 19066-1:2014 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014)". This standard covers: ISO 19066-1:2014 establishes a system of designation for methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials, which can be used as the basis for specifications. The types of MABS plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) Vicat softening temperature, b) melt volume-flow rate, c) Charpy notched impact strength, and d) tensile modulus, and on information about composition, intended application and/or method of processing, important properties, additives, colorants, fillers, and reinforcing materials.
ISO 19066-1:2014 establishes a system of designation for methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials, which can be used as the basis for specifications. The types of MABS plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) Vicat softening temperature, b) melt volume-flow rate, c) Charpy notched impact strength, and d) tensile modulus, and on information about composition, intended application and/or method of processing, important properties, additives, colorants, fillers, and reinforcing materials.
EN ISO 19066-1:2014 is classified under the following ICS (International Classification for Standards) categories: 83.080.20 - Thermoplastic materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 19066-1:2014 has the following relationships with other standards: It is inter standard links to EN ISO 10366-1:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 19066-1:2014 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2015
1DGRPHãþD
SIST EN ISO 10366-1:2003
3ROLPHUQLPDWHULDOL0DWHULDOL]DREOLNRYDQMHLQHNVWUXGLUDQMHQDRVQRYL
PHWLOPHWDNULODWDNULORQLWULOEXWDGLHQVWLUHQD 0$%6 GHO 6LVWHPR]QDþHYDQMDLQ
SRGODJH]DVSHFLILNDFLMH ,62
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and
extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-
1:2014)
Kunststoffe - Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Formmassen - Teil 1:
Bezeichnungssystem und Basis für Spezifikationen (ISO 19066-1:2014)
Plastiques - Méthacrylate de méthyle-acrylonitrile-butadiène-styrène (MABS) pour
moulage et extrusion - Partie 1: Système de désignation et base de spécifications (ISO
19066-1:2014)
Ta slovenski standard je istoveten z: EN ISO 19066-1:2014
ICS:
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 19066-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 83.080.20 Supersedes EN ISO 10366-1:2002
English Version
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene
(MABS) moulding and extrusion materials - Part 1: Designation
system and basis for specifications (ISO 19066-1:2014)
Plastiques - Matériaux plastique (méthacrylate de méthyle)- Kunststoffe - Methylmethacrylat-Acrylnitril-Butadien-Styrol
acrylonitrile-butadiène-styrène (MABS) pour moulage et (MABS)-Formmassen - Teil 1: Bezeichnungssystem und
extrusion - Partie 1: Système de désignation et base de Basis für Spezifikationen (ISO 19066-1:2014)
spécifications (ISO 19066-1:2014)
This European Standard was approved by CEN on 6 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19066-1:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 19066-1:2014) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2015, and conflicting national standards shall be withdrawn at the
latest by April 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10366-1:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19066-1:2014 has been approved by CEN as EN ISO 19066-1:2014 without any modification.
INTERNATIONAL ISO
STANDARD 19066-1
First edition
2014-10-01
Plastics — Methyl methacrylate-
acrylonitrile-butadiene-styrene
(MABS) moulding and extrusion
materials —
Part 1:
Designation system and basis for
specifications
Plastiques — Matériaux plastique (méthacrylate de méthyle)-
acrylonitrile-butadiène-styrène (MABS) pour moulage et extrusion —
Partie 1: Système de désignation et base de spécifications
Reference number
ISO 19066-1:2014(E)
©
ISO 2014
ISO 19066-1:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 19066-1:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Designation system . 2
3.1 General . 2
3.2 Data block 1 . 2
3.3 Data block 2 . 3
3.4 Data block 3 . 3
3.5 Data block 4 . 4
3.6 Data block 5 . 6
4 Example of a designation . 6
ISO 19066-1:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic
materials.
This first edition of ISO 19066-1 cancels and replaces ISO 10366-1:2002, which has been technically
revised to introduce a new designation system.
The revised designation system is published under a new ISO number, as many existing documents
refer to ISO 10366-1. If the existing ISO 10366-1 would be replaced by the new designation system, these
documents would refer to the incorrect designation system.
In order to give users time to switch from ISO 10366-1 to ISO 19066-1, ISO 10366-1 needs to be phased
out in 5 to 10 years. During this period, ISO 10366-2 will effectively be Part 2 of this International
Standard.
ISO 19066 consists of the following parts, under the general title Plastics — Methyl methacrylate-
acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials:
— Part 1: Designation system and basis for specifications
iv © ISO 2014 – All rights reserved
ISO 19066-1:2014(E)
Introduction
ISO 10366-1:2002 is complex and does not fit with daily practice anymore. In practice ISO 1043 and
ISO 11469 are, in combination, ‘improperly’ being used as a designation system for, e.g. marking. The
aim of this International Standard is to simplify the data block system and to connect more to ISO 1043
and ISO 11469, where the first two blocks are used for generic identification and marking of products.
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...