EN 754-5:1995
(Main)Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
This part of EN 754 specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn rectangular bars having thicknesses in the range from 2 mm up to 60 mm and widths in the range from 5 mm up to and including 200 mm.
Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 5: Rechteckstangen, Grenzabmaße und Formtoleranzen
Dieser Teil der EN 754 legt die Grenzabmaße und Formtoleranzen für gezogene Rechteckstangen aus Aluminium und Aluminiumlegierungen mit einer Dicke von 2 mm bis 60 mm und einer Breite von 5 mm bis 200 mm fest.
Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 5: Barres rectangulaires, tolérances sur dimensions et forme
La présente partie de la norme EN 754 spécifie les tolérances sur dimensions et forme des barres rectangulaires étirées en aluminium et alliages d'aluminium d'épaisseur comprise entre 2 mm et 60 mm inclus et de largeur comprise entre 5 mm et 200 mm inclus.
Aluminij in aluminijeve zlitine - Hladno vlečene palice/drogovi in cevi - 5. del: Palice s pravokotnim prerezom, tolerance mer in oblike
General Information
- Status
- Withdrawn
- Publication Date
- 21-Nov-1995
- Withdrawal Date
- 18-Mar-2008
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 5 - Extruded and drawn products
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 19-Mar-2008
- Completion Date
- 19-Mar-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Referred By
EN 1999-1-1:2007 - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 754-5:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form". This standard covers: This part of EN 754 specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn rectangular bars having thicknesses in the range from 2 mm up to 60 mm and widths in the range from 5 mm up to and including 200 mm.
This part of EN 754 specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn rectangular bars having thicknesses in the range from 2 mm up to 60 mm and widths in the range from 5 mm up to and including 200 mm.
EN 754-5:1995 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 754-5:1995 has the following relationships with other standards: It is inter standard links to EN 754-5:2008, EN ISO 177:1999, EN 1999-1-1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 754-5:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH+ODGQRYOHþHQHSDOLFHGURJRYLLQFHYLGHO
3DOLFHVSUDYRNRWQLPSUHUH]RPWROHUDQFHPHULQREOLNH
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular
bars, tolerances on dimensions and form
Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 5:
Rechteckstangen, Grenzabmaße und Formtole
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...