EN 12316-2:2000
(Main)Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
This European Standard specifies a method for determining the resistance to peeling of joints between two adjacent sheets of the same plastic or rubber sheets for roof waterproofing. This test method will be used mainly for testing the joints in mechanically fastened plastic or rubber sheets for roof waterproofing. NOTE The peeling characteristics of a joint between two widths of plastic or rubber sheets vary considerably depending on the material, method of jointing, the size of the overlap and the workmanship.
Abdichtungsbahnen - Bestimmung des Schälwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Schälwiderstandes der Fügenähte zwischen zwei benachbarten Dachabdichtungsbahnen fest, die aus dem gleichen Kunststoff oder Elastomer bestehen. Dieses Prüfverfahren wird im Wesentlichen zur Prüfung der Prüfung der Fügenähte in mechanisch befestigten Dachabdichtungsbahnen aus Kunststoff oder Elastomer angewendet. ANMERKUNG Die Schälkennwerte einer Fügenaht zwischen zwei Kunststoff- oder Elastomerbahnen unterscheiden sich merklich in Abhängigkeit von Werkstoff, Fügeverfahren, Größe der Überlappung und Art der Arbeitsausführung.
Feuilles souples d'étanchéité - Détermination de la résistance au pelage des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères
Cette norme Européenne décrit une méthode de détermination de la résistance au pelage des joints formés entre deux feuilles attenantes, constituées du même type de feuilles plastiques ou élastomères. Cette méthode d'essai est principalement utilisée pour tester les joints des feuilles plastiques et élastomères pour l'étanchéité de toiture appliquées par fixations mécaniques. NOTE Les caractéristiques du pelage d'un joint entre deux feuilles plastiques ou élastomères varient de manière considérable, en fonction de la méthode de jonction utilisée, des dimensions de recouvrement et de la main d'oeuvre.
Hidroizolacijski trakovi - Določevanje odpornosti proti razslojevanju spojev - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh
General Information
- Status
- Withdrawn
- Publication Date
- 19-Sep-2000
- Withdrawal Date
- 04-Jun-2013
- Technical Committee
- CEN/TC 254 - Flexible sheets for water proofing
- Drafting Committee
- CEN/TC 254/SC 2 - Synthetic sheets
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 05-Jun-2013
- Completion Date
- 05-Jun-2013
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 14-May-2011
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 12316-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing". This standard covers: This European Standard specifies a method for determining the resistance to peeling of joints between two adjacent sheets of the same plastic or rubber sheets for roof waterproofing. This test method will be used mainly for testing the joints in mechanically fastened plastic or rubber sheets for roof waterproofing. NOTE The peeling characteristics of a joint between two widths of plastic or rubber sheets vary considerably depending on the material, method of jointing, the size of the overlap and the workmanship.
This European Standard specifies a method for determining the resistance to peeling of joints between two adjacent sheets of the same plastic or rubber sheets for roof waterproofing. This test method will be used mainly for testing the joints in mechanically fastened plastic or rubber sheets for roof waterproofing. NOTE The peeling characteristics of a joint between two widths of plastic or rubber sheets vary considerably depending on the material, method of jointing, the size of the overlap and the workmanship.
EN 12316-2:2000 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12316-2:2000 has the following relationships with other standards: It is inter standard links to EN 12316-2:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12316-2:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12316-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung des Schälwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de la résistance au pelage des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomeresFlexible sheets for waterproofing - Determination of peel resistance of joi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...