EN 14527:2016/prA1:2017
(Amendment)Shower trays for domestic purposes
Shower trays for domestic purposes
This European Standard specifies requirements, test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability when used for personal hygiene.
This standard is applicable to all sizes and shapes of shower trays.
This standard does not cover shower trays for use with medical provisions.
NOTE 1 For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2 Annex A lists characteristics of materials commonly used for manufacturing shower trays.
Duschwannen für den Hausgebrauch
Receveurs de douche à usage domestique
Kadi za prhanje za domačo uporabo - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2017
.DGL]DSUKDQMH]DGRPDþRXSRUDER'RSROQLOR$
Shower trays for domestic purposes
Duschwannen für den Hausgebrauch
Receveurs de douche à usage domestique
Ta slovenski standard je istoveten z: EN 14527:2016/prA1:2017
ICS:
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 14527:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2017
ICS 91.140.70
English Version
Shower trays for domestic purposes
Receveurs de douche à usage domestique Duschwannen für den Hausgebrauch
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 163.
This draft amendment A1, if approved, will modify the European Standard EN 14527:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14527:2016/prA1:2017:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modification to Clause 4, Classification . 4
2 Modification to Clause 5, Requirements . 4
3 Modification to sub-clause 5.3.3.2, Particular requirements for shower trays made of
enamelled steel and enamelled cast iron . 4
4 Modification to Clause 6, Requirements . 4
5 Modification to Clause 9, Marking, labelling and packaging . 4
6 Modification to sub-clause 10.1, General . 4
7 Modification to sub-clause 10.2.1, General . 4
8 Modification to sub-clause 10.2.2, Samples, testing and compliance criteria . 5
9 Modification to Annex ZA . 5
Annex ZA (informative) Relationship of this European Standard with Regulation No.
305/2011 . 5
ZA.1 Scope and relevant characteristics . 5
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 6
ZA.3 Assignment of AVCP tasks . 6
European foreword
This document (EN 14527:2016/prA1:2017) has been prepared by Technical Committee CEN/TC 163
“Sanitary appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of the EU Construction Products
Regulation.
For the relationship with EU Construction Products Regulation, see informative Annex ZA which is an
integral part of this European Standard.
1 Modification to Clause 4, Classification
Replace the word "Class" with "Type" for both
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.