EN 12059:2008
(Main)Natural stone products - Dimensional stone work - Requirements
Natural stone products - Dimensional stone work - Requirements
This European Standard specifies requirements for the following stone units:
a) Structural solid stone units:
i. Load bearing stone elements, typically subject to prevailing compression stresses, such as solid columns, arches and similar;
ii. Solid stone elements used for parapets, handrails, balustrades, copings and the like, intended to withstand horizontal live loadings in addition to any dead load.
b) Finishing solid stone units:
i. Curved cladding panels, for the external finishing of walls, columns or pilasters;
ii. Stone elements for framing one or more side openings in building walls or floors, such as sills, jambs, architraves and similar.
This European Standard does not include stone masonry units, as defined in EN 771-6, stone which is a ‘cast-on’ finish to pre-cast concrete or agglomerated stones. Moreover it does not cover commemorative or funeral stones and sculptures, when they do not show the above mentioned characteristics.
Natursteinprodukte - Steine für Massivarbeiten - Anforderungen
Diese Europäische Norm legt Anforderungen an die folgenden Steinelemente fest:
a) Strukturelle feste Steinelemente.
i) Lasttragende Steinelemente, üblicherweise den maßgeblichen Druckspannungen ausgesetzt, wie
feste Säulen, Bögen und ähnliches;
ii) Feste Steinelemente für Brüstungen, Handläufe, Balustraden, Mauerabdeckungen und ähnliches, die
zusätzlich zu jeglichen Eigenlasten horizontalen Nutzlasten widerstehen müssen.
b) Abschließende feste Steinelemente.
i) Gekrümmte Bekleidungsplatten für die Außenbekleidung von Wänden, Säulen oder Wandpfeilern;
ii) Steinelemente zur Rahmung einer oder mehrerer Seitenöffnungen in Gebäudewänden oder -decken,
wie Schwellen, aufrechte Rahmenteile, Sockel und ähnliches.
Diese Europäische Norm gilt nicht für Steinelemente für Mauerwerk, wie in EN 771-6 definiert, Gestein als
„angegossene“ Oberfläche von Fertigbeton, oder Gesteinskörnungen. Sie gilt auch nicht für Denkmale und
Grabsteine und Skulpturen, wenn sie nicht die oben genannten Merkmale aufweisen.
Produits en pierre naturelle - Pierre de taille - Exigences
La présente Norme européenne fixe les exigences relatives aux éléments de pierre suivants :
a) Éléments de construction massifs en pierre :
i) Éléments porteurs en pierre, généralement soumis à des contraintes en compression, tels que
colonnes et arches massives, par exemple ;
ii) Éléments massifs en pierre, utilisés pour les parapets, mains courantes, balustrades,
couronnements et autres éléments similaires, destinés à résister à des charges horizontales
sous tension, en plus de tout poids mort.
b) Éléments de finition massifs en pierre :
i) Panneaux cintrés de revêtement attaché, pour la finition extérieure de murs, colonnes ou
pilastres ;
ii) Éléments en pierre utilisés pour encadrer une ou plusieurs ouvertures latérales dans des
planchers ou murs de construction, tels que seuils, huisseries, chambranles et autres éléments
similaires.
La présente Norme européenne n’inclut ni les éléments de maçonnerie en pierre définis dans l’EN 771-6, ni
les pierres sous forme de finition moulée sur du béton précontraint, ni les pierres agglomérées. Elle ne couvre
pas non plus les sculptures et pierres funéraires ou commémoratives lorsqu’elles ne présentent pas les
caractéristiques mentionnées plus haut.
Proizvodi iz naravnega kamna – Dimenzijsko obdelan kamen -Zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Natural stone products - Dimensional stone work - RequirementsProizvodi iz naravnega kamna – Dimenzijsko obdelan kamen -ZahteveProduits en pierre naturelle - Pierre de taille - ExigencesNatursteinprodukte - Steine für Massivarbeiten - AnforderungenTa slovenski standard je istoveten z:EN 12059:2008SIST EN 12059:2008en,fr,de91.100.15ICS:SLOVENSKI
STANDARDSIST EN 12059:200801-junij-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12059February 2008ICS 91.100.15 English VersionNatural stone products - Dimensional stone work -RequirementsProduits en pierre naturelle - Pierre de taille - ExigencesNatursteinprodukte - Steine für Massivarbeiten -AnforderungenThis European Standard was approved by CEN on 12 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12059:2008: E
Sampling.14 A.1 General.14 A.2 Principles of sampling.14 A.3 Taking bulk samples.14 A.4 Preparing a sampling plan.14 A.5 Sampling apparatus.15 A.6 Sampling methods.15 A.6.1 General.15 A.6.2 Sampling from quarries.15 A.6.3 Sampling from plants.16 A.6.4 Sampling from buildings.16 A.7 Marking, packaging and dispatch of the samples.16 A.8 Sampling report.16 Bibliography.18
a) Structural solid stone units: i. Load bearing stone elements, typically subject to prevailing compression stresses, such as solid columns, arches and similar; ii. Solid stone elements used for parapets, handrails, balustrades, copings and the like, intended to withstand horizontal live loadings in addition to any dead load. b) Finishing solid stone units: i. Curved cladding panels, for the external finishing of walls, columns or pilasters; ii. Stone elements for framing one or more side openings in building walls or floors, such as sills, jambs, architraves and similar. This European Standard does not include stone masonry units, as defined in EN 771-6, stone which is a ‘cast-on’ finish to pre-cast concrete or agglomerated stones. Moreover it does not cover commemorative or funeral stones and sculptures, when they do not show the above mentioned characteristics. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1925, Natural stone test methods - Determination of water absorption coefficient by capillarity EN 1926, Natural stone test methods - Determination of uniaxial compressive strength EN 1936, Natural stone test methods - Determination of real density and apparent density, and of total and open porosity EN 12371, Natural stone test methods - Determination of frost resistance EN 12372, Natural stone test methods - Determination of flexural strength under concentrated load EN 12407, Natural stone test methods - Petrographic examination EN 12440, Natural stone - Denomination criteria EN 12670:2001, Natural stone - Terminology EN 13161, Natural stone test methods - Determination of flexural strength under constant moment EN 13373:2003, Natural stone test methods - Determination of geometric characteristics on units EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests EN 13755, Natural stone test methods - Determination of water absorption at atmospheric pressure EN 14066, Natural stone test methods - Determination of resistance to ageing by thermal shock
curved stones or three-dimensional shaped stone elements. 4 Requirements 4.1 Requirements for geometric characteristics 4.1.1 General The dimensions shall be as given in the appropriate design drawings. All measurements shall be carried out in accordance with EN 13373 and all measured values of individual units shall fall within the required tolerances. 4.1.2 Requirements for thickness The thickness shall not deviate from the nominal thickness by more than the tolerances given in Table 1. Table 1 — Tolerances on the nominal thickness Nominal thickness in mm
Tolerance
More than 15 up to and including 30 ± 10 % a More than 30 up to and including 80 ± 3 mm b More than 80 ± 5 mm c a in case of elements to be assembled the tolerance of the visual thickness shall become respectively ± 0,5 mm b in case of elements to be assembled the tolerance of the visual thickness shall become respectively ± 1 mm c in case of elements to be assembled the tolerance of the visual thickness shall become respectively ± 2 mm
Stricter tolerances may be declared by the supplier. The required thickness of the stone elements shall result from a structural analysis or similar procedure which takes into account the technical and physical properties of the stone and the intended application. For natural cleft/riven faces, Table 1 does not apply and the tolerances shall be declared by the supplier.
Stricter tolerances may be declared by the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.