Roomheaters fired by solid fuel - Requirements and test methods

TC - Modification to A.6.2.9, Equation 22

Raumheizer für feste Brennstoffe - Anforderungen und Prüfungen

Poêles à combustible solide - Exigences et méthodes d'essai

Grelniki prostorov na trdna goriva - Zahteve in preskusne metode - Popravek AC k dopolnilu A2

General Information

Status: Withdrawn
Publication Date: 20-Jun-2006
Withdrawal Date: 31-Jul-2007

ICS: 97.100.30 - Solid fuel heaters

Technical Committee: CEN/TC 295 - Residential solid fuel burning appliances
Drafting Committee: CEN/TC 295/WG 2 - Roomheaters

Current Stage: 9960 - Withdrawal effective - Withdrawal
Start Date: 01-Aug-2007
Completion Date: 01-Aug-2007

Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Directive: 89/106/EEC - Construction products

Ref Project: SIST EN 13240:2003/A2:2005/AC:2006 - Roomheaters fired by solid fuel - Requirements and test methods

Relations

Replaced By: EN 16510-2-1:2022 - Residential solid fuel burning appliances - Part 2-1: Roomheaters
Effective Date: 28-Dec-2022

Replaced By: EN 16510-1:2022 - Residential solid fuel burning appliances - Part 1: General requirements and test methods
Effective Date: 28-Dec-2022

Replaced By: EN 16510-1:2018 - Residential solid fuel burning appliances - Part 1: General requirements and test methods
Effective Date: 01-Aug-2018

Replaced By: EN 13240:2001/A2:2004/AC:2007 - Roomheaters fired by solid fuel - Requirements and test methods
Effective Date: 22-Dec-2008

Corrects: EN 13240:2001/A2:2004 - Roomheaters fired by solid fuel - Requirements and test methods
Effective Date: 22-Dec-2008

EN 13240:2003/A2:2005/AC:2006 - Page 3 preview

EN 13240:2003/A2:2005/AC:2006 - Page 1 preview

EN 13240:2003/A2:2005/AC:2006 - Page 2 preview

Corrigendum

EN 13240:2003/A2:2005/AC:2006

English, French and German language

2 pages

Preview

e-Library read for

AI-Chat

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 97 97.100 97.100.30

Frequently Asked Questions

What is EN 13240:2001/A2:2004/AC:2006?

EN 13240:2001/A2:2004/AC:2006 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Roomheaters fired by solid fuel - Requirements and test methods". This standard covers: TC - Modification to A.6.2.9, Equation 22

What is the scope of EN 13240:2001/A2:2004/AC:2006?

TC - Modification to A.6.2.9, Equation 22

What ICS categories does EN 13240:2001/A2:2004/AC:2006 belong to?

EN 13240:2001/A2:2004/AC:2006 is classified under the following ICS (International Classification for Standards) categories: 97.100.30 - Solid fuel heaters. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to EN 13240:2001/A2:2004/AC:2006?

EN 13240:2001/A2:2004/AC:2006 has the following relationships with other standards: It is inter standard links to EN 16510-2-1:2022, EN 16510-1:2022, EN 16510-1:2018, EN 13240:2001/A2:2004/AC:2007, EN 13240:2001/A2:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

Is EN 13240:2001/A2:2004/AC:2006 a harmonized European standard?

EN 13240:2001/A2:2004/AC:2006 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

How can I access EN 13240:2001/A2:2004/AC:2006?

EN 13240:2001/A2:2004/AC:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

EN 13240:2003/A2:2005/AC:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Roomheaters fired by solid fuel - Requirements and test methodsGrelniki prostorov na trdna goriva - Zahteve in preskusne metode - Popravek AC k dopolnilu A2Poeles a combustible solide - Exigences et méthodes d'essaiRaumheizer für feste Brennstoffe - Anforderungen und PrüfungenTa slovenski standard je istoveten z:EN 13240:2001/A2:2004/AC:2006SIST EN 13240:2003/A2:2005/AC:2006en,fr,de97.100.30ICS:SLOVENSKI
STANDARDSIST EN 13240:2003/A2:2005/AC:200601-november-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13240:2001/A2:2004/ACJune 2006Juin 2006Juni 2006ICS 97.100.30English versionVersion FrançaiseDeutsche FassungRoomheaters fired by solid fuel - Requirements and test methodsPoêles à combustible solide - Exigences etméthodes d'essaiRaumheizer für feste Brennstoffe -Anforderungen und PrüfungenThis corrigendum becomes effective on 21 June 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 21 juin 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 21.Juni 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZA
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

CEN

CEN/TS 18163:2025(Main)

Residential wood logs burning appliances - Overload test procedures

SIST-TS CEN/TS 18163:2025

The overload test ensures the stove's performance remains consistent even when the use deviates from the nominal test requirements, by assessing its ability to handle a higher load of fuel compared to the standard nominal fuel load which occurs during the use phase.
This document specifies a test method for an additional overload test for appliances as described in EN 16510-2-1:2022 and EN 16510-2-2:2022.
This test procedure covers testing in addition a higher heat output than nominal heat output as described in EN 16510-1:2022.

Technical specification
6 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 16510-2-10:2025(Main)

Residential solid fuel burning appliances - Part 2-10: Multi-firing sauna stoves fired by natural wood logs

SIST EN 16510-2-10:2025

This European Standard covers multi-firing sauna stoves in which the heating stones are separated from and indirectly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads.
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of multi-firing sauna stoves fired by wood logs and provides instructions for them. Furthermore, it also gives provisions for evaluation of conformity (i.e. initial type testing (ITT) and factory production control (FPC) and marking of these products.
This standard is applicable to hand-fuelled intermittent burning multi-firing sauna stoves, which provide heat into the space where they are installed.
These multi-firing sauna stoves may be supplied either as an assembled appliance or as a manufacturer’s pre-designed unit consisting of pre-fabricated components designed to be built on site in accordance with the manufacturer’s specified assembly instructions. One-off installations are not included.
These multi-firing sauna stoves may burn only natural wood logs in accordance with the appliance operating instructions.
Single-firing heat storage sauna stoves, in which the stones are directly heated by the fire and the flue gases, which pass through them, are not covered by this European Standard. This standard is also not applicable to mechanically fed sauna stoves, sauna stoves having fan assisted combustion air, sauna stoves fitted with a boiler, sauna stoves with incorporated flue or sauna stoves having any electrical connection.

Standard
41 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 16510-2-7:2025(Main)

Residential solid fuel burning appliances - Part 2-7: Combination appliances fired by wood logs and pellets

SIST EN 16510-2-7:2025

This document is applicable to space heaters, inset appliances and cookers intended for mechanical fuelling with wood pellets and for manual fuelling with wood logs. They can be freestanding or inset appliances.
The intended use of the appliances is space heating in residential buildings and can be cooking. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances typically use auxiliary energy which is measured in this standard as well. They are operated with natural draught and can be fan-assisted.
NOTE 1   A fan-assisted appliance does still operate under negative pressure in the flue gas system.
For inset appliances and especially their testing additional information can be necessary from EN 16510-2-2:2022.
These appliances burn wood pellets and wood logs only, in accordance with the appliance instructions. They only operate with the firedoors closed.
NOTE 2   These appliances can have an integral fuel hopper or be combined with an external fuel hopper.
These appliances can be fitted with a single or double combustion chamber having a single flue gas outlet.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of combination appliances fired by wood logs and pellets.
This document is not applicable to appliances:
-   with boiler intended for water systems having water temperatures above 110°C and 3 bar and for sanitary hot water,
-   intended to be used with a pure horizontal exhaust (through the building wall),
-   with flue gas condensation in the appliance,
-   switching on / off for part load operation,
-   with simultaneous wood and pellet operation with a single flue gas outlet,
-   with non-automatic pellet loading,
-   with single combustion chamber and double flue gas outlet,
-   continuous burning appliances.
For clarity, all test methods are addressed in Annex A.

Standard
48 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 16510-2-5:2025(Main)

Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances

SIST EN 16510-2-5:2025

This document is applicable to slow heat release appliances for solid fuel (freestanding manually fuelled intermittent burning slow heat release appliances (SHRA) having heat storage capacity such that they can provide heat and release it for an extended period after the fire has gone out).
The intended use of the appliances is space heating in residential buildings. They can be fitted with a boiler or heat exchanger (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These slow heat release appliances may be supplied either as an assembled appliance or as a pre-designed unit consisting of prefabricated components designed to be built on site in accordance with the-specified assembly instructions.
These appliances can burn one or more types of the following solid fuels as specified:
—   wood logs;
—   compressed untreated wood;
—   wood pellets;
—   lignite briquettes;
—   solid mineral fuels;
—   peat briquettes.
This document is not applicable to:
—   mechanically fed appliances
—   appliances with fan assisted combustion air
—   one off installations
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning slow heat release appliances.

Standard
57 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 15544:2023(Main)

One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) - Dimensioning

SIST EN 15544:2023

The application of the calculations of this document enables a verification of the emission values carbon monoxide, nitrogen dioxide, organically bound carbon as well as dust and the energy efficiency.
Complying with the calculations of this document results in emission values less or equal for carbon monoxide 1 500 mg/mn3 (1 000 mg/MJ), nitrogen dioxide 225 mg/mn3 (150 mg/MJ), organically bound carbon 120 mg/mn3 (80 mg/MJ) and dust 90 mg/mn3 (60 mg/MJ). If the calculations of this document are used in combination with suitable combustion chambers that prove lower emission values in a type test, these values are also considered to be complied with.
The user shall be aware that there might be national or local regulations, which impose stricter legal emissions and/or efficiency requirements.
This document specifies calculations for the dimensioning of Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) based upon the required nominal heat output of the stove as declared by the producer. The Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) are of individual one-off construction design. The document can be used for log wood fired Kachelgrundöfen/Putzgrundöfen (tiled/plastered stoves) that burn one fuel load per storage period with a maximum load between 10 kg and 40 kg (log wood with water content from 12 % to 20 %, thickness of 5 cm to 10 cm in diameter, length varies usually from 25 cm to 50 cm, and is oriented toward the combustion chamber dimensions) and a storage period (nominal heating time) between 8 h and 24 h.
This document is applicable for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) equipped with fireclay as interior material, with an apparent density between 1,750 kg/m3 and 2,300 kg/m3, a degree of porosity from 17 % up to 33 % by volume and a heat conductivity from 0,90 W/mK up to 1,35 W/mK (temperature range 20 °C to 400 °C).
This document is applicable for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) with combustion air supply from the side via a firebox door frame or the standing grate of the heating door into the combustion chamber. The document is applicable for an inflow speed of the combustion air between 2 m/s and 4 m/s.
This document also applies to the combination with combustion chambers that are suitable for one-off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) and for which compliance with the legally required emission values has been verified as part of a type test by an accredited and/or notified body.
The following general conditions apply to such combustion chambers:
-   with an air-fuel ratio of between 1,95 and 3,95 according to the type test;
-   with a maximum load from 5 kg to 40 kg;
-   using other suitable materials as well as fireclay.
With regard to the type test, this document is applicable for combustion chambers which are tested:
-   according to EN 15250 (or prEN 16510-2-5);
-   according to EN 13229 (or prEN 16510-2-2); or
-   according to respective national standards (e.g. ÖNORM B 8303).
This document is applicable for type tested combustion chambers designed for batch fired pellet burning if meeting the requirements according to this document (air-fuel ratio between 1,95 and 3,95, the load of the pellets shall be burned in (78 ± 20) min).
This document is not applicable for:
-   combinations with water heat exchangers for central heating or other heat absorbing elements like open water tanks etc.;
-   combustion chambers with glass plates greater than 1/5 of the combustion chamber surface;
-   mass-produced prefabricated stoves (slow heat release appliances) or partly prefabricated stoves (slow heat release appliances) according to EN 15250 (or prEN 16510-2-5).

Standard
24 pages
English language
e-Library read for
AI-Chat
1 day

21-Feb-2023
97.100.30
CEN/TC 295

CEN

EN 16510-2-1:2022(Main)

Residential solid fuel burning appliances - Part 2-1: Roomheaters

SIST EN 16510-2-1:2023

This document is applicable to roomheaters for solid fuel (freestanding or inset solid fuel burning local space heating products that operate with fire doors either as closed only or as closed or open; insets without functional modification).
The intended use of the appliances is space heating in residential buildings. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
This document is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning roomheaters.

Standard
29 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 16510-2-4:2022(Main)

Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW

SIST EN 16510-2-4:2023

This document is applicable to independent boiler appliances for solid fuel with a nominal output up to 50 kW (hand and automatically fired independent boilers (hereafter called appliances)).
The indented use of the appliances is space heating in residential buildings. This happens directly or via provision of hot water for central heating. They are designed for use only with open vented systems at a working pressure not exceeding 2 bar.
The appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
The appliances are operated closed and/or open.
The appliances are typed according to their tightness depending on their designation in accordance with a possible operation together with a room ventilation system.
This document is not applicable for:
-   appliances for hot water only production and heat output < 5 kW;
-   automatic stoking devices.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning independent boiler appliances.

Standard
33 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 16510-2-6:2022(Main)

Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers

SIST EN 16510-2-6:2023

This document is applicable to mechanical by wood pellets fed roomheaters, inset appliances and cookers up to 50 kW nominal heat output.
The intended use of the appliances is space heating in residential buildings and can be cooking. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances typically use auxiliary energy which is measured in this document as well. They can be operated with either natural draught or fan-assisted combustion air.
NOTE   A fan-assisted appliance does still operate under negative pressure in the flue gas system.
These appliances burn wood pellets only as specified. They only operate with the firedoors closed.
This document is not applicable to appliances:
-   with boiler intended for water systems having water temperatures above 110 °C and 3 bar;
-   with boiler intended for water systems having direct contact with sanitary hot water;
-   intended to be used with a pure horizontal exhaust (through the building wall);
-   with flue gas condensation in the appliance;
-   switching on/off for part load operation.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of mechanical by wood pellets fed roomheaters, inset appliances and cookers.

Standard
42 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 16510-2-3:2022(Main)

Residential solid fuel burning appliances - Part 2-3: Cookers

SIST EN 16510-2-3:2023

This document is applicable to cookers for solid fuel (hand fired residential cookers).
The intended use of the appliances is cooking and space heating in residential buildings. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
This document is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning cookers.

Standard
41 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 16510-1:2022(Main)

Residential solid fuel burning appliances - Part 1: General requirements and test methods

SIST EN 16510-1:2023

This document is applicable to residential solid fuel burning appliances of which the nominal space heat output is more than 6 % of the combined nominal space heat output and nominal water heat output (total heat output).
This document specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as “appliance(s)”) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity, i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances.
This document specifies CO, NOx, OGC and particulate matter (PM) emission test methods.
This document is as well applicable to appliances intended to carry the load of a chimney.
Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.
This document is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron.
This document is not applicable to appliances with a boiler intended for water systems having:
- water temperatures above 110 °C and/or an operating pressure of more than 300 kPa (3 bar);
- direct contact with sanitary hot water.
This document is not applicable to appliances to be operated with ventilating systems which are intended to operate with pressure below -15 Pa in the room of installation of the appliance in relation to the outside atmosphere.

Standard
164 pages
English language
e-Library read for
AI-Chat
1 day