Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification

This document specifies requirements and classification systems for burglar resistant characteristics of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following opening functions: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically), projecting and rolling as well as non-openable constructions. It also covers products that include items such as letter plates or ventilation grilles. It specifies requirements for the burglar resistance of a construction product (as defined in 3.1 of this document).
NOTE 1 The elements of curtain walling will be assigned to group 1 to 4 product depending on their design.
This document does not directly cover the resistance of locks and cylinders to attack with picking tools. Building hardware are components of the above mentioned products and cannot be classified as such according to this document.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241:2003+A2:2016.
NOTE 2 It is important that construction products that can be reached or driven through by vehicles are protected by appropriate measures such as barriers, extensible ramps, etc.
The requirements to an electronic security system (e.g. access control system) to control electromechanical locks and strikes according to EN 14846:2008 are not in the scope of this document.
NOTE 3 Locks and striking plates according to EN 14846:2008 needs an access control system for authorized and secure access (comparable to a lock cylinder). The transmission of the signal between the lock and the access control system (e.g. wiring) needs also consideration. (The signal is transmitted in encrypted form or is not accessible during the manual attack attempt.) Upcoming revisions of this document might include such a reference.

Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung - Anforderungen und Klassifizierung

Dieses Dokument legt die Anforderungen und die Klassifizierung der einbruchhemmenden Eigenschaften von Türelementen, Fenstern, Vorhangfassaden, Gitterelementen und Abschlüssen fest. Es gilt für die folgenden Öffnungsfunktionen: Drehen, Kippen, Falten, Drehkippen, Schwingen, Schieben (horizontal und vertikal), Schwenken (horizontal und vertikal), Überstand und Rollen sowie für nicht öffenbare Konstruktionen. Das Dokument behandelt außerdem auch Produkte, die Elemente wie beispielsweise Briefklappen oder Lüftungsgitter enthalten. Es legt Anforderungen an die Einbruchhemmung eines Bauproduktes fest (entsprechend 3.1 des vorliegenden Dokuments).
ANMERKUNG 1   Die Elemente einer Vorhangfassade werden den Produkten der Gruppe 1 bis 4 je nach Konstruktion zugeordnet.
Dieses Dokument behandelt nicht direkt die Widerstandsfähigkeit von Schlössern und Schließzylindern gegen Angriffe mit Sperrwerkzeugen (Picking). Baubeschläge sind Bestandteile der vorstehenden Produkte und können nicht als solche nach diesem Dokument klassifiziert werden.
Dieses Dokument gilt nicht für Wände und Dächer sowie für Türen, Tore und Schranken, die für den Einbau in Bereichen für den Zugang von Personen dienen und die hauptsächlich für einen sicheren Zugang für Güter und von Personen geführten Fahrzeugen in industriellen, gewerblichen und Wohnbereichen gedacht sind, welche in den Anwendungsbereich von EN 13241:2003+A2:2016 fallen.
ANMERKUNG 2   Es ist wichtig, dass Bauprodukte, die durch Kraftfahrzeuge erreicht oder durchfahren werden können, durch geeignete Maßnahmen, wie Sperren, ausfahrbare Rampen usw., geschützt werden.
Die Anforderungen an ein elektronisches Sicherheitssystem (z. B. Zugangskontrollsystem) zur Steuerung elektromechanischer Schlösser und Schließbleche nach EN 14846:2008 fallen nicht in den Anwendungsbereich dieses Dokuments.
ANMERKUNG 3   Schlösser und Schließbleche nach EN 14846:2008 benötigen ein Zugangskontrollsystem für autorisierten und sicheren Zugang (vergleichbar mit einem Schließzylinder). Die Übertragung des Signals zwischen dem Schloss und dem Zugangskontrollsystem (z. B. Verkabelung) muss ebenfalls berücksichtigt werden. (Das Signal wird in verschlüsselter Form übertragen oder ist während des manuellen Angriffsversuchs nicht zugänglich.) Bevorstehende Überarbeitungen dieses Dokuments könnten einen solchen Hinweis enthalten.

Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à l'effraction - Prescriptions et classification

Le présent document fixe les exigences et les systèmes de classification relatifs aux caractéristiques de résistance à l’effraction des blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures. Il s’applique aux modes d’ouverture suivants : battant, oscillant, pliant, oscillo-battant, à gonds haut ou bas, coulissant (horizontalement et verticalement), pivotant (horizontalement et verticalement), à projection et à enroulement ainsi que constructions non ouvrables. Il couvre également les produits comportant des éléments tels que des fentes à lettres ou des grilles de ventilation. Il spécifie les exigences relatives à la résistance à l’effraction d’un produit de construction (telle que définie en 3.1 du présent document).
NOTE 1 Les éléments de façade rideau sont affectés au produit des groupes 1 à 4 en fonction de leur conception.
Le présent document ne traite pas directement de la résistance aux ouvertures fines des serrures et des cylindres. Les éléments de quincaillerie de bâtiment sont des composants des produits mentionnés ci-dessus et ne peuvent pas être classés comme tels conformément au présent document.
Le présent document ne s’applique pas aux murs et toitures, ni aux portes, portails et barrières, destinés à être installés dans des zones accessibles aux personnes et dont l’utilisation principale prévue est de permettre l’accès sécurisé de marchandises et de véhicules accompagnés ou conduits par des personnes, dans des locaux industriels et commerciaux ou des garages dans les zones d’habitation, tel que traité par l’EN 13241:2003+A2:2016.
NOTE 2 Il est important que les produits de construction qui sont accessibles ou peuvent être empruntés par des véhicules, soient protégés par des moyens appropriés tels que barrières, rampes déployables, etc.
Les exigences relatives à un système de sécurité électronique (tel qu’un système de contrôle des accès) permettant de contrôler les serrures et gâches électromécaniques conformément à l’EN 14846:2008 n’entrent pas dans le domaine d’application du présent document.
NOTE 3 Les serrures et gâches conformément à l’EN 14846:2008 nécessitent un système de contrôle des accès permettant de garantir un accès autorisé et sécurisé (comparable à un cylindre de serrure). La transmission du signal entre la serrure et le système de contrôle des accès (par exemple, câblage) nécessite également d’être prise en compte. (Le signal est transmis sous une forme chiffrée ou n’est pas accessible pendant la tentative manuelle d’ouverture par effraction.) Les futures révisions du présent document pourront inclure ce type de référence.

Vrata, okna, obešene fasade, mreže in polkna - Protivlomna odpornost - Zahteve in klasifikacija

General Information

Status
Published
Publication Date
01-Jun-2021
Withdrawal Date
30-Dec-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
02-Jun-2021
Due Date
08-Jul-2021
Completion Date
02-Jun-2021

Relations

Buy Standard

Standard
EN 1627:2021
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN 1627:2011
Vrata, okna, obešene fasade, mreže in polkna - Protivlomna odpornost - Zahteve in
klasifikacija
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance -
Requirements and classification
Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung -
Anforderungen und Klassifizierung
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à
l'effraction - Prescriptions et classification
Ta slovenski standard je istoveten z: EN 1627:2021
ICS:
13.310 Varstvo pred kriminalom Protection against crime
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 1627
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 13.310; 91.060.50 Supersedes EN 1627:2011
English Version
Pedestrian doorsets, windows, curtain walling, grilles and
shutters - Burglar resistance - Requirements and
classification
Blocs-portes pour piétons, fenêtres, façades rideaux, Türen, Fenster, Vorhangfassaden, Gitterelemente und
grilles et fermetures - Résistance à l'effraction - Abschlüsse - Einbruchhemmung - Anforderungen und
Prescriptions et classification Klassifizierung
This European Standard was approved by CEN on 19 March 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1627:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Resistance classification . 7
5 Glazing . 8
6 Building hardware . 8
6.1 General . 8
6.2 Key related security . 8
6.2.1 Requirements . 8
6.2.2 Application to windows . 9
6.3 Attack related security . 10
6.4 Building hardware assessment according to their appropriate standard . 10
6.5 Assessment of building hardware not complying with Table 3 requirements . 12
6.5.1 General . 12
6.5.2 Additional test and tool set for building hardware not complying with Table 3 . 13
7 Mechanical strength . 20
7.1 Static loading . 20
7.2 Dynamic loading in resistance classes 1, 2 and 3 . 23
8 Manual burglary attempts . 23
8.1 General . 23
8.2 Non-key operated lockable hardware . 24
9 Classification report . 24
10 Installation . 24
11 Test specimens . 24
Annex A (informative) Recommendations for the contents of the manufacturer's
installation instructions . 25
Annex B (informative) Resistance classes – Classification according to EN 1627 . 26
Annex C (normative) Field of application . 28
Annex D (normative) Procedure for testing and classification . 34
Annex E (informative) Marking . 36

European foreword
This document (EN 1627:2021) has been prepared by Technical Committee CEN/TC 33 “Doors, windows,
shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards shall
be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1627:2011.
Significant changes in this revision are:
a) Normative references updated;
b) Scope includes electromechanical building hardware products;
c) Clarification of the number of resistance classes (RC 1 / RC 1N);
d) Clause 6 - Building hardware re-written;
e) New subclause 8.2 – Non-key operated lockable hardware;
f) Annex B deleted;
g) Annex C rewritten and updated;
h) New informative Annex E - Marking added;
This document is one of a series of standards for burglar resistant pedestrian doorsets, windows, curtain
walling, grilles and shutters. The other standards in the series are:
— EN 1628:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar
resistance — Test method for the determination of resistance under static loading;
— EN 1629:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar
resistance — Test method for the determination of resistance under dynamic loading;
— EN 1630:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar
resistance — Test method for the determination of resistance to manual burglary attempts.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document specifies requirements and classification systems for burglar resistant characteristics of
pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following
opening functions: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and
vertically), pivoted (horizontally and vertically), projecting and rolling as well as non-openable
constructions. It also covers products that include items such as letter plates or ventilation grilles. It
specifies requirements for the burglar resistance of a construction product (as defined in 3.1 of this
document).
NOTE 1 The elements of curtain walling will be assigned to group 1 to 4 product depending on their design.
This document does not directly cover the resistance of locks and cylinders to attack with picking tools.
Building hardware are components of the above mentioned products and cannot be classified as such
according to this document.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for
installation in areas in the reach of persons, and for which the main intended uses are giving safe access
for goods and vehicles accompanied or driven by persons in industrial, commercial or residential
premises, as covered by EN 13241:2003+A2:2016.
NOTE 2 It is important that construction products that can be reached or driven through by vehicles are
protected by appropriate measures such as barriers, extensible ramps, etc.
The requirements to an electronic security system (e.g. access control system) to control
electromechanical locks and strikes according to EN 14846:2008 are not in the scope of this document.
NOTE 3 Locks and striking plates according to EN 14846:2008 needs an access control system for authorized
and secure access (comparable to a lock cylinder). The transmission of the signal between the lock and the access
control system (e.g. wiring) needs also consideration. (The signal is transmitted in encrypted form or is not
accessible during the manual attack attempt.) Upcoming revisions of this document might include such a reference.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 356:1999, Glass in building — Security glazing — Testing and classification of resistance against
manual attack
EN 1303:2015, Building hardware — Cylinders for locks — Requirements and test methods
EN 1628:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar resistance —
Test method for the determination of resistance under static loading
EN 1629:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar resistance —
Test method for the determination of resistance under dynamic loading
EN 1630:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar resistance —
Test method for the determination of resistance to manual burglary attempts
EN 1906:2012, Building hardware — Lever handles and knob furniture — Requirements and test methods
EN 12209:2016, Building hardware — Mechanically operated locks and locking plates — Requirements
and test methods
EN 12216:2018, Shutters, external blinds, internal blinds — Terminology, glossary and definitions
EN 12519:2018, Windows and pedestrian doors — Terminology
EN 13119:2016, Curtain walling — Terminology
EN 13126-3:2011, Building hardware — Hardware for windows and door-height windows — Requirements
and test methods — Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware
EN 13241:2003+A2:2016, Industrial, commercial, garage doors and gates — Product standard,
performance characteristics
EN 14846:2008, Building hardware — Locks and latches — Electromechanically operated locks and
striking plates — Requirements and test methods
EN 15684:2020, Building hardware — Mechatronic cylinders — Requirements and test methods
EN 15685:—, Building hardware — Multipoint locks, latches and locking plates — Characteristics and test
methods
EN 16867:2020, Building hardware — Mechatronic door furniture — Requirements and test methods
EN ISO 6508-1:2016, Metallic materials — Rockwell hardness test — Part 1: Test method (ISO 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.