EN 15651-4:2012
(Main)Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
This European Standard specifies definitions and requirements for cold applied non-structural elastic sealants used for movement joints in floors in building construction for interior and exterior use.
Areas of application are: floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses.
NOTE Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5.
Chemical containment, cold applied joint sealants for concrete pavements to be used in roads, airfields and sewage treatment plants, perimeter seals are excluded.
This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in pedestrian walkways.
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 4: Fugendichtstoffe für Fußgängerwege
Dieses Europäische Norm legt Definitionen für und Anforderungen an kalt verarbeitbare, nicht tragende elastische Dichtstoffe fest, die im Hochbau, sowohl in Gebäuden als auch im Außenbereich, für Bewegungsfugen in Böden verwendet werden.
Anwendungsbereiche sind: für Fußgängerwege und öffentliche Bereiche ausgelegte Bodenfugen, Bewe-gungsfugen zwischen Betonplatten, Bereiche mit Lasten durch Fußgänger, durch Gepäckwagen/Kofferkulis belastete Bereiche, begehbare Böden, Balkone, Terrassen, Lagerhäuser.
ANMERKUNG Festlegungen zur Bewertung der Konformität (d. h. zur Erstprüfung sowie zur werkseigenen Produk-tionskontrolle) und zur Kennzeichnung dieser Produkte werden in EN 15651 5 angegeben.
Chemische Sicherheitsbereiche, kalt verarbeitbare Fugendichtstoffe für Betonfahrbahnen von Straßen, Flug-plätzen und Kläranlagen sowie Umfangsabdichtungen sind ausgeschlossen.
Diese Europäische Norm gilt nicht für nicht tragende, nicht plastische (nicht in pastöser Form vorliegende) Dichtstoffe, die für Fugen in Fußgängerwegen verwendet werden.
Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 4: Mastics pour chemins piétonniers
La présente Norme Européenne spécifie les définitions et les exigences relatives aux mastics élastiques non structuraux appliqués à froid utilisés pour réaliser des joints dynamiques dans les planchers dans le domaine de la construction immobilière et prévus pour un usage intérieur ou extérieur.
Les domaines d’application sont les suivants : joints de planchers conçus pour les chemins piétonniers, lieux publics, joints dynamiques entre des dalles en béton, zones soumises à une charge piétonnière, zones où circulent des chariots, planchers à usage piétonnier, balcons, terrasses et entrepôts.
NOTE Les dispositions concernant l’évaluation de la conformité (à savoir l’essai de type initial et le contrôle de la production en usine) et le marquage de ces produits sont données dans l’EN 15651-5.
Sont exclus les applications pour réservoirs de produits chimiques, les joints appliqués à froid pour les dalles en béton routières, pour les terrains d’aviation et les stations d’épurations.
La présente Norme Européenne ne s’applique pas aux mastics non structuraux sous une forme autre que pâteuse utilisés dans les chemins piétonniers.
Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 4. del: Tesnilne mase za sprehajalne površine
Ta evropski standard določa definicije in zahteve za hladno nanesene nekonstrukcijske elastične tesnilne mase, ki se uporabljajo za premikajoče stike na tleh pri gradnji stavb za notranjo in zunanjo uporabo. Področja uporabo so: talni stiki za sprehajalne površine, javne površine, premikajoči se stiki med betonskimi ploščami, površine z obremenitvijo pešcev, površine, na katerih se uporabljajo vozički, pohodna tla, balkoni, terase, skladišča. OPOMBA Določila o vrednotenju skladnosti (tj. začetni tipski preskusi in kontrola proizvodnje v obratu) in označevanju teh izdelkov so podana v standardu EN 15651-5. Hramba kemikalij, hladno nanesene tesnilne mase za stik betonskih površin na cestah, letalskih stezah in v napravah za čiščenje odplak ter obodne tesnilne mase niso vključene. Ta evropski standard se ne uporablja za nekonstrukcijske tesnilne mase, ki niso v obliki paste in tesnilne mase, ki se uporabljajo na sprehajalnih površinah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 4. del: Tesnilne mase za sprehajalne površineFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 4: Fugendichtstoffe für FußgängerwegeMastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 4: Mastics pour chemins piétonniersSealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-4:2012SIST EN 15651-4:2013en,fr,de01-april-2013SIST EN 15651-4:2013SLOVENSKI
STANDARDSIST EN 15651-4:20101DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-4
September 2012 ICS 91.100.50 Supersedes EN 15651-4:2010English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 4: Mastics pour chemins piétonniers
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 4: Fugendichtstoffe für Fußgängerwege This European Standard was approved by CEN on 10 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-4:2012: ESIST EN 15651-4:2013
Example on the frequency of tests for factory production control .17Annex B (normative)
Determination of the change of volume of self levelling cold applied joint sealants .18B.1Principle .18B.2Apparatus and materials .18B.3Preparation of test specimens .18B.4Test procedure .18B.5Calculation and expression of results .19B.5.1Change in mass .19B.5.2Change in volume .19Annex ZA (informative)
Clauses of this European Standard addressing the provisions of EU Construction Products Directive.20ZA.1Scope and relevant characteristics .20ZA.2Procedure for attestation of conformity of non-structural sealants for external and/or internal movement joints in floors .22ZA.2.1Systems of attestation of conformity .22ZA.2.2EC certificate of conformity and EC declaration of conformity .23ZA.3CE marking and labelling .25SIST EN 15651-4:2013
This document supersedes EN 15651-4:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Construction Products Directive (89/106/EC). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document is one of the product European Standards within the framework series of EN 15651 on Sealants for non-structural use in joints in buildings and pedestrian walkways, as follows: Part 1: Sealants for facade elements, Part 2: Sealants for glazing, Part 3: Sealants for sanitary joints, Part 4: Sealants for pedestrian walkways (this document), Part 5: Evaluation of conformity and marking. The following significant technical changes have been implemented in this new edition: an Annex ZA has been added; the clause on reaction to fire was improved. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
This European Standard specifies definitions and requirements for cold applied non-structural elastic sealants used for movement joints in floors in building construction for interior and exterior use.
Areas of application are: floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses.
NOTE Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5. Chemical containment, cold applied joint sealants for concrete pavements to be used in roads, airfields and sewage treatment plants, perimeter seals are excluded. This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in pedestrian walkways.
2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13238, Reaction to fire tests for building products — Conditioning procedures and general rules for selection of substrates EN 13501-1:2007+A1, Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests EN 14187-3, Cold applied joint sealants — Part 3: Test method for the determination of self-levelling properties EN 15651-5:2012, Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 5: Evaluation of conformity and marking EN ISO 291, Plastics — Standard atmospheres for conditioning and testing (ISO 291) EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868) EN ISO 1183-1:2004, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) EN ISO 6927:2012, Buildings and civil engineering works — Sealants — Vocabulary (ISO 6927:2012) EN ISO 7389, Building construction — J
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.