EN 12543-2:1999
(Main)Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
This European standard specifies a method for the measurement of focal spot dimensions above 0,2 mm of X-ray systems up to and including 500 kV tube voltage by means of the pinhole camera radiographic method. The voltage applied for this measurement is restricted to 200 kV. The image quality and the resolution of X-ray images depend highly on the characteristics of the focal spot, in particular the size and the two dimensional intensity distribution.
Zerstörungsfreie Prüfung - Charakterisierung von Brennflecken in Industrie-Röntgenanlagen für die zerstörungsfreie Prüfung - Teil 2: Radiographisches Lochkamera-Verfahren
Diese Europäische Norm legt die Messung von Brennfleckabmessungen oberhalb von 0,2 mm für Röntgenanlagen bis einschließlich 500 kV Röntgenspannung mit dem Lochkamera-Verfahren fest. Die für die Messung angewendete Spannung ist auf 200 kV beschränkt. Die Bildgüte und die Auflösung von Röntgenbildern hängen in hohem Maße von den Eigenschaften des Brennfleckes ab, insbesondere von der Größe und der zweidimensionalen Intensitätsverteilung.
Essais non destructifs - Caractéristiques des foyers émissifs des tubes radiogènes industriels utilisés dans les essais non destructifs - Partie 2: Méthode radiographique par sténopé
La présente norme spécifie une méthode de détermination des dimensions des foyers émissifs supérieurs à 0,2 mm des tubes radiogènes dont la tension est inférieure ou égale à 500 kV, par la méthode radiographique par sténopé. La tension appliquée pour cette mesure est limitée à 200 kV. La qualité et la résolution des images radiographiques dépendent étroitement des caractéristiques des foyers émissifs, en particulier de leurs dimensions et de la répartition bidimensionnelle de la distribution spectrale.
Neporušitveno preskušanje - Značilnosti goriščne površine v industrijskih rentgenskih sistemih za Neporušitveno preskušanje - 2. del: Metoda s kamero z luknjo
General Information
- Status
- Withdrawn
- Publication Date
- 21-Sep-1999
- Withdrawal Date
- 15-Jul-2008
- Technical Committee
- CEN/TC 138 - Non-destructive testing
- Drafting Committee
- CEN/TC 138/WG 1 - Ionizing radiation testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-Jul-2008
- Completion Date
- 16-Jul-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
IMP NDT d.o.o.
Non-destructive testing services. Radiography, ultrasonic, magnetic particle, penetrant, visual inspection.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Q Techna d.o.o.
NDT and quality assurance specialist. 30+ years experience. NDT personnel certification per ISO 9712, nuclear and thermal power plant inspections, QA/
Sponsored listings
Frequently Asked Questions
EN 12543-2:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method". This standard covers: This European standard specifies a method for the measurement of focal spot dimensions above 0,2 mm of X-ray systems up to and including 500 kV tube voltage by means of the pinhole camera radiographic method. The voltage applied for this measurement is restricted to 200 kV. The image quality and the resolution of X-ray images depend highly on the characteristics of the focal spot, in particular the size and the two dimensional intensity distribution.
This European standard specifies a method for the measurement of focal spot dimensions above 0,2 mm of X-ray systems up to and including 500 kV tube voltage by means of the pinhole camera radiographic method. The voltage applied for this measurement is restricted to 200 kV. The image quality and the resolution of X-ray images depend highly on the characteristics of the focal spot, in particular the size and the two dimensional intensity distribution.
EN 12543-2:1999 is classified under the following ICS (International Classification for Standards) categories: 19.100 - Non-destructive testing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12543-2:1999 has the following relationships with other standards: It is inter standard links to EN 12543-2:2008; is excused to EN 12543-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12543-2:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12543-2:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WULMVNLKOXNQMRZerstörungsfreie Prüfung - Charakterisierung von Brennflecken in Industrie-Röntgenanlagen für die zerstörungsfreie Prüfung - Teil 2: Radiographisches Lochkamera-VerfahrenEssais non destructifs - Caractéristiques des foyers émissifs des tubes radiogenes industriels utilisés dans les essais non destructifs - Partie 2: Méthode radiographique par sténopéNon-destructive testing - Characteristics of focal spots
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...