EN 1761:1999
(Main)Rubber hoses and hose assemblies for fuel truck delivery - Specification
Rubber hoses and hose assemblies for fuel truck delivery - Specification
This European Standard specifies the requirements for two types of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar. Both types of hose are designed for: a) use with hydrocarbon fuels, having an aromatic hydrocarbon content not exceeding 50 % by volume and containing oxygenated compounds up to 15 %; b) operation within the temperature range of -30°C to +70°C, undamaged by climatic conditions of -50°C to 70°C when stored in static conditions.
Gummischläuche und schlauchleitungen für Tankwagen - Spezifikation
Diese Europäische Norm legt die Anforderungen fest für zwei Typen von Gummischläuchen und Gummischlauchleitungen zum Beladen und Entladen von flüssigen Kohlenwasserstoff-Treibstoffen mit einem höchsten Arbeitsdruck von 10 bar. Beide Schlauchtypen sind bestimmt für: a) die Verwendung mit Kohlenwasserstoff-Treibstoffen, die einen Gehalt an aromatischen Kohlenwasserstoff haben, der 50 Volumen-% nicht überschreitet, und die bis zu 15% an sauerstoffhaltigen Bestandteilen enthalten;
Tuyaux et flexibles en caoutchouc pour la livraison d'hydrocarbures liquides par camions-citernes - Spécification
La présente norme européenne spécifie les prescriptions pour deux types de tuyaux et de flexibles en caoutchouc destinés au chargement et au déchargement des hydrocarbures liquides sous une pression maximale de service de 10 bar. Ces deux types de tuyaux sont conçus pour: a) être employés avec des carburants à base d'hydrocarbures ayant une teneur en hydrocarbures aromatiques ne dépassant pas 50% en volume et en mélanges oxygénés inférieure ou égale à 15%; b) être utilisés dans une plage de température se situant entre -30°C et +70°C, sans être endommagés par des conditions climatiques de -50°C à 70°C ...
Gumene cevi in cevni priključki za dostavo goriva s cisterno - Specifikacija
General Information
- Status
- Withdrawn
- Publication Date
- 16-Feb-1999
- Withdrawal Date
- 02-Dec-2025
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Current Stage
- 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
- Start Date
- 01-Feb-2023
- Completion Date
- 03-Dec-2025
Relations
- Effective Date
- 08-Feb-2023
Frequently Asked Questions
EN 1761:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Rubber hoses and hose assemblies for fuel truck delivery - Specification". This standard covers: This European Standard specifies the requirements for two types of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar. Both types of hose are designed for: a) use with hydrocarbon fuels, having an aromatic hydrocarbon content not exceeding 50 % by volume and containing oxygenated compounds up to 15 %; b) operation within the temperature range of -30°C to +70°C, undamaged by climatic conditions of -50°C to 70°C when stored in static conditions.
This European Standard specifies the requirements for two types of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar. Both types of hose are designed for: a) use with hydrocarbon fuels, having an aromatic hydrocarbon content not exceeding 50 % by volume and containing oxygenated compounds up to 15 %; b) operation within the temperature range of -30°C to +70°C, undamaged by climatic conditions of -50°C to 70°C when stored in static conditions.
EN 1761:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies; 75.200 - Petroleum products and natural gas handling equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1761:1999 has the following relationships with other standards: It is inter standard links to EN 1761:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1761:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HFLILNDFLMDGummischläuche und schlauchleitungen für Tankwagen - SpezifikationTuyaux et flexibles en caoutchouc pour la livraison d'hydrocarbures liquides par camions-citernes - SpécificationRubber hoses and hose assemblies for fuel truck delivery - Specification83.140.40Gumene ceviHoses75.200Petroleum products and natural gas handling equipmentICS:Ta sloven
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...