EN 14188-3:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polnilne in tesnilne mase za stike – 3. del: Specifikacije za elastomerne tesnilne profileFugeneinlagen und Fugenmassen - Teil 3: Anforderungen an elastomere FugenprofileProduits de scellement de joints - Partie 3 : Spécifications pour les joints d'étanchéité moulésJoint fillers and sealants - Part 3: Specifications for preformed joint seals93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14188-3:2006SIST EN 14188-3:2006en01-april-2006SIST EN 14188-3:2006SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14188-3January 2006ICS 91.100.50 English VersionJoint fillers and sealants - Part 3: Specifications for preformedjoint sealsProduits de scellement de joints - Partie 3 : Spécificationspour les joints d'étanchéité moulésFugeneinlagen und Fugenmassen - Teil 3: Anforderungenan elastomere FugenprofileThis European Standard was approved by CEN on 12 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14188-3:2006: ESIST EN 14188-3:2006

Initial Type Testing and frequencies of testing for Factory Production Control.12 Annex B (informative)
Example of a product data sheet.13 B.1 General information.13 Annex C (informative)
Installation.14 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.15 ZA.1 Scope and relevant characteristics.15 ZA.2 Procedure(s) for attestation of conformity.16 ZA.3 CE marking and labelling.17 SIST EN 14188-3:2006

Ethylen-Propylen-Dien-Monomer rubber, — CR rubber:
Chloroprene Rubber. SIST EN 14188-3:2006

5 Requirements 5.1 General The materials shall not contain any ingredients that can have a detrimental effect on the concrete pavement. NOTE An incorporated fibre reinforcement in the preformed joint seal as additional protection against over-extension is recommended. 5.2 Dimensional tolerances The dimensions shall be determined in accordance with ISO 3302-1 and the result shall conform to classes E1 or E2 defined in ISO 3302-1. 5.3 Imperfections and defects The imperfections and defects shall be determined by visual inspection. The surface of preformed seals shall be free of surface defects or irregularities, which can affect their function. SIST EN 14188-3:2006
...