EN ISO/IEC 17050-2:2004

SLOVENSKI STANDARD
01-januar-2005
1DGRPHãþD
SIST EN 45014:1998
Ugotavljanje skladnosti – Dobaviteljeva izjava o skladnosti – 2. del: Podporna
dokumentacija (ISO/IEC 17050-2:2004)
Conformity assessment - Supplier's declaration of conformity - Part 2: Supporting
documentation (ISO/IEC 17050-2:2004)
Konformitätsbewertung - Konformitätserklärung von Anbeitern - Teil 2: Unterstützende
Dokumentation (ISO/IEC 17050-2:2004)
Evaluation de la conformité - Déclaration de conformité du fournisseur - Partie 2:
Documentation d'appui (ISO/IEC 17050-2:2004)
Ta slovenski standard je istoveten z: EN ISO/IEC 17050-2:2004
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO/IEC 17050-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 03.120.20 Supersedes EN 45014:1998
English version
Conformity assessment - Supplier's declaration of conformity -
Part 2: Supporting documentation (ISO/IEC 17050-2:2004)
Evaluation de la conformité - Déclaration de conformité du Konformitätsbewertung - Konformitätserklärung von
fournisseur - Partie 2: Documentation d'appui (ISO/IEC Anbeitern - Teil 2: Unterstützende Dokumentation (ISO/IEC
17050-2:2004) 17050-2:2004)
This European Standard was approved by CEN and CENELEC on 30 September 2004.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN Management Centre or to any CEN or CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN or CENELEC member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria,
Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
CEN Management Centre: CENELEC Central Secretariat:
rue de Stassart, 36  B-1050 Brussels rue de Stassart, 35  B-1050 Brussels
© 2004 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 17050-2:2004 E
worldwide for CEN national Members and for CENELEC
Members.
Foreword
This document (EN ISO/IEC 17050-2:2004) has been prepared by Technical Committee
ISO/CASCO "Committee on conformity assessment" in collaboration with Technical Committee
CEN/CLC/TC 1 "Criteria for conformity assessment bodies", the secretariat of which is held by
SN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2005, and conflicting national
standards shall be withdrawn at the latest by April 2005.

This document supersedes EN 45014:1998.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO/IEC 17050-2:2004 has been approved by CEN and CENELEC as EN ISO/IEC
17050-2:2004 without any modifications.

INTERNATIONAL ISO/IEC
STANDARD 17050-2
First edition
2004-10-01
Conformity assessment — Supplier's
declaration of conformity —
Part 2:
Supporting documentation
Évaluation de la conformité — Déclaration de conformité du
fournisseur —
Partie 2: Documentation d'appui

Reference number
ISO/IEC 17050-2:2004(E)
©
ISO 2004
ISO/IEC 17050-2:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 — All rights reserved

ISO/IEC 17050-2:2004(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
...