Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)

ISO 2010:2011 specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive.

Linsensenkschrauben mit Schlitz - Produktklasse A (ISO 2010:2011)

Diese Internationale Norm enthält Festlegungen über Linsensenkschrauben mit Schlitz, in Produktklasse A,
mit Gewinde von M1,6 bis M10.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt,
so können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888,
ISO 898-1, ISO 965-2 und ISO 3506-1.

Vis à métaux à tête fraisée bombée fendue - Grade A (ISO 2010:2011)

L'ISO 2010:2011 spécifie les caractéristiques des vis à métaux à tête fraisée bombée fendue de grade A et de diamètre de filetage M1,6 à M10 inclus.

Vijaki z zarezano lečasto ugrezno glavo - Razred izdelave A (ISO 2010:2011)

Ta mednarodni standard določa značilnosti vijakov z zarezano lečasto ugrezno glavo razreda izdelave A in z navoji od M1,6 do vključno M10.
Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 261, ISO 888, ISO 898-1, ISO 965-2 in ISO 3506-1.

General Information

Status
Published
Publication Date
31-Aug-2011
Withdrawal Date
30-Mar-2012
ICS
21.060.10 - Bolts, screws, studs
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Sep-2011
Completion Date
01-Sep-2011
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN ISO 2010:2011 - Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)

Relations

Replaces
EN ISO 2010:1994 - Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994)
Effective Date
18-Sep-2010
Refers
EN 1337-2:2004 - Structural bearings - Part 2: Sliding elements
Effective Date
28-Jan-2026
Refers
EN ISO 11553-1:2008 - Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
Effective Date
28-Jan-2026
Refers
EN ISO 6974-1:2001 - Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1:2000)
Effective Date
28-Jan-2026
Refers
EN 572-7:2004 - Glass in Building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
Effective Date
28-Jan-2026
Refers
EN ISO 9013:2002/A1:2003 - Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2003)
Effective Date
28-Jan-2026
Refers
EN 12274-4:2003 - Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
Effective Date
28-Jan-2026

Overview

EN ISO 2010:2011 - Slotted raised countersunk head screws (Product grade A) is the CEN-adopted version of ISO 2010:2011. This standard specifies the characteristics of countersunk slotted raised head screws of product grade A with metric threads from M1.6 to M10 inclusive. It replaces the earlier 1994 edition and is intended for manufacturers, designers and quality personnel working with small metric fasteners.

Key topics and requirements

  • Scope and dimensions
    • Defines thread sizes (M1.6 to M10), head geometry, shank and thread length relationships, and preferred nominal lengths.
    • Includes dimensional tables and a figure showing head and shank features.
  • Material and mechanical properties
    • Covers typical property classes for steel (e.g., 4.8, 5.8) and corrosion-resistant stainless steel grades (A2-50, A2-70).
    • Refers to ISO 898‑1, ISO 3506‑1 and ISO 8839 for mechanical property requirements.
  • Threading and tolerances
    • Specifies general-purpose metric thread standards (ISO 261, ISO 965‑2) and tolerance class 6g for external threads.
    • Tolerance and product-grade requirements reference ISO 4759‑1.
  • Surface integrity, coatings and finish
    • Surface discontinuity limits per ISO 6157‑1.
    • Electroplating and coating requirements: ISO 4042 (electroplating), ISO 10683 (zinc flake), and passivation per ISO 16048.
  • Inspection and acceptance
    • Acceptance inspection is specified by ISO 3269; designation examples (e.g., ISO 2010 - M5 × 20 - 4.8) are provided.
  • Cross-references
    • The standard points users to related general fastener standards (ISO 225, ISO 261, ISO 888, ISO 965‑2, ISO 3506‑1, ISO 7721).

Applications and who uses this standard

  • Fastener manufacturers - design and production of slotted raised countersunk head screws to consistent dimensional, material and mechanical specifications.
  • Product designers & engineers - selecting the correct head type and thread size (M1.6–M10) for assemblies in electronics, small machinery, appliance manufacturing, automotive trim, and precision equipment.
  • Procurement and quality assurance - specifying product grade A fasteners, checking conformity, and applying acceptance inspection criteria.
  • Standards committees and testing labs - reference for conformity assessment, test methods and interoperability of metric fasteners.

Related standards (selected)

  • ISO 225, ISO 261, ISO 965‑2 - thread specifications
  • ISO 898‑1, ISO 3506‑1, ISO 8839 - mechanical properties
  • ISO 4759‑1 - tolerances for product grades
  • ISO 4042, ISO 10683, ISO 16048 - coatings and passivation
  • ISO 6157‑1, ISO 3269 - surface discontinuities and acceptance inspection

EN ISO 2010:2011 is essential when specifying or producing slotted raised countersunk head screws to ensure dimensional accuracy, mechanical performance and consistent quality across supply chains.

Frequently Asked Questions

EN ISO 2010:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)". This standard covers: ISO 2010:2011 specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive.

ISO 2010:2011 specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive.

EN ISO 2010:2011 is classified under the following ICS (International Classification for Standards) categories: 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 2010:2011 has the following relationships with other standards: It is inter standard links to EN ISO 2010:1994, EN 1337-2:2004, EN ISO 11553-1:2008, EN ISO 6974-1:2001, EN 572-7:2004, EN ISO 9013:2002/A1:2003, EN 12274-4:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 2010:2011 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN ISO 2010:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Linsen-Senkschrauben mit Schlitz - Produktklasse A (ISO 2010:2011)Vis à métaux à tête fraisée bombée fendue - Grade A (ISO 2010:2011)Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN ISO 2010:2011SIST EN ISO 2010:2011en,fr,de01-december-2011SIST EN ISO 2010:2011SLOVENSKI
STANDARDSIST EN ISO 2010:19961DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 2010
September 2011 ICS 21.060.10 Supersedes EN ISO 2010:1994English Version
Slotted raised countersunk head screws -Product grade A (ISO 2010:2011)
Vis à métaux à tête fraisée bombée fendue - Grade A (ISO 2010:2011)
Linsensenkschrauben mit Schlitz - Produktklasse A (ISO 2010:2011) This European Standard was approved by CEN on 8 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2010:2011: ESIST EN ISO 2010:2011

Reference numberISO 2010:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO2010Fourth edition2011-09-01Slotted raised countersunk head screws — Product grade A Vis à métaux à tête fraisée bombée fendue — Grade A
ISO 2010:2011(E)
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 2010:2011(E) © ISO 2011 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2010 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners with metric external thread. This fourth edition cancels and replaces the third edition (ISO 2010:1994), of which it constitutes a minor revision.
INTERNATIONAL STANDARD ISO 2010:2011(E) © ISO 2011 – All rights reserved 1 Slotted raised countersunk head screws — Pr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...