EN ISO 9100-7:2005
(Main)Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005)
Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005)
ISO 9100-7:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 58 mm deep for wide-mouth glass containers.
Glasbehälter - Vakuum-Nockenverschluss-Mündungen - Teil 7: 58 deep (ISO 9100-7:2005)
Récipients en verre - Bagues à crans pour bouchage sous vide - Partie 7: 58 deep (ISO 9100-7:2005)
L'ISO 9100-7:2005 spécifie les dimensions des bagues à crans pour bouchage sous vide de cote nominale 58 mm deep, destinées aux récipients en verre à col large.
Steklena embalaža – Grla za vakuumsko zapiranje - 7. del: 58, globoko (ISO 9100-7:2005)
General Information
- Status
- Published
- Publication Date
- 14-Jan-2005
- Technical Committee
- CEN/TC 261 - Packaging
- Drafting Committee
- CEN/TC 261/SC 5/WG 21 - Glass packaging
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 23-Oct-2009
- Completion Date
- 23-Oct-2009
Overview
EN ISO 9100-7:2005 - "Glass containers - Vacuum lug finishes - Part 7: 58 deep" is a CEN-endorsed ISO standard that specifies the dimensional and design requirements for a 58 mm deep vacuum lug finish used on wide-mouth glass containers (jars and pots). The standard defines the finish geometry, thread construction and key functional requirements needed to ensure reliable vacuum sealing and mechanical compatibility with closures.
Key topics and requirements
- Scope and drawings: Dimensions and profiles are provided in Figures 1–3 and summarized in Table 1. The standard covers the finish geometry (cutter profile), thread construction, and the closure position envelope.
- Nominal size: The standard applies to a vacuum lug finish with a nominal depth of 58 mm for wide-mouth glass containers.
- Thread and closure parameters: Thread form, pitch, leads and threads-per-inch are specified so caps engage and cam off correctly; the theoretical cam-off point must lie on the upper flank of the thread to ensure proper cap removal.
- Sealing surface quality: The sealing area shall be free of defects (no checks, dips, crizzles or other flaws) that could impair vacuum sealing.
- Form tolerances and concentricity: Ovality of finish diameters should be minimized. Diameters identified as E and T are required to be concentric with one another for reliable closure fit and vacuum integrity.
- Optional details and tolerances: Details not explicitly specified may be adapted for the application; general linear and angular tolerances are to follow EN 22768-1 (ISO 2768-1).
- Manufacturing considerations: Cutter inclination (α-angle) and cut-in profiles are defined; the contour below the H dimension and any bead design are optional but must allow necessary clearance for the closure.
Applications and users
- Who uses it: Glass container manufacturers, mould/tool designers, packaging engineers, closure and cap manufacturers, and quality assurance teams in food, beverage and pharmaceutical packaging.
- Practical uses:
- Ensuring interchangeability and correct fit between jars/pots and vacuum lug caps.
- Designing moulds and cutter profiles for blow-and-blow or press-and-blow production of wide-mouth containers.
- Specifying inspection criteria for sealing surfaces, concentricity and thread geometry in quality control.
- Supporting packaging development where vacuum sealing integrity and reliable cap removal are critical (e.g., preserves, baby food, sterilized products).
Related standards
- EN 22768-1 (ISO 2768-1) - general tolerances for dimensions without individual tolerance indications.
- CETIE data sheet GME 20-05:1995 - referenced background data used in development.
Keywords: EN ISO 9100-7:2005, vacuum lug finish, 58 deep, glass containers, wide-mouth jars, thread parameters, sealing surface, cutter profile, packaging standard.
Frequently Asked Questions
EN ISO 9100-7:2005 is a standard published by the European Committee for Standardization (CEN). Its full title is "Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005)". This standard covers: ISO 9100-7:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 58 mm deep for wide-mouth glass containers.
ISO 9100-7:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 58 mm deep for wide-mouth glass containers.
EN ISO 9100-7:2005 is classified under the following ICS (International Classification for Standards) categories: 55.100 - Bottles. Pots. Jars. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 9100-7:2005 is associated with the following European legislation: EU Directives/Regulations: 80/232/EEC, 87/356/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 9100-7:2005 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2005
Steklena embalaža – Grla za vakuumsko zapiranje - 7. del: 58, globoko (ISO 9100-
7:2005)
Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005)
Glasbehälter - Vakuum-Nockenverschluss-Mündungen - Teil 7: 58 deep (ISO 9100-
7:2005)
Récipients en verre - Bagues a crans pour bouchage sous vide - Partie 7: 58 deep (ISO
9100-7:2005)
Ta slovenski standard je istoveten z: EN ISO 9100-7:2005
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9100-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 55.100
English version
Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO
9100-7:2005)
Récipients en verre - Bagues à crans pour bouchage sous Glasbehälter - Vakuum-Nockenverschluss-Mündungen -
vide - Partie 7: 58 deep (ISO 9100-7:2005) Teil 7: 58 deep (ISO 9100-7:2005)
This European Standard was approved by CEN on 23 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9100-7:2005: E
worldwide for CEN national Members.
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Dimensions.4
Bibliography .8
Foreword
This document (EN ISO 9100-7:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”,
the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 63 “Glass
containers”.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...