EN 13523-2:2014
(Main)Coil coated metals - Test methods - Part 2: Gloss
Coil coated metals - Test methods - Part 2: Gloss
This part of EN 13523 specifies the procedure for determining the gloss of an organic coating on a metallic substrate. Gloss is a characteristic of fundamental importance to the appearance of the coil coated product.
The apparatus requires a flat specimen of size greater than the aperture, thus, uneven surfaces cannot be measured.
This method is applicable to all pigmented and unpigmented coatings including metallic/pearlescent coatings. However, for textured coatings it is only indicative.
Bandbeschichtete Metalle - Prüfverfahren - Teil 2: Glanz
Dieser Teil von EN 13523 legt das Verfahren zum Bestimmen des Glanzes einer organischen Beschichtung auf einem metallischen Substrat fest. Der Glanz ist eine Kenngröße von grundsätzlicher Bedeutung für das Aussehen eines bandbeschichteten Produktes.
Das Gerät erfordert eine flache Probe, die größer ist als die Messöffnung. Unebene Proben können folglich nicht gemessen werden.
Das Verfahren ist auf alle pigmentierten und nichtpigmentierten Beschichtungen, einschließlich Beschichtungen mit Metalleffekt oder Perlglanzeffekt, anwendbar. Bei strukturierten Beschichtungen ergibt es jedoch nur Anhaltswerte.
Tôles prélaquées - Méthodes d'essai - Partie 2: Brillant
La présente partie de l’EN 13523 décrit la méthode de détermination du brillant d’un revêtement organique sur un subjectile métallique. Le brillant est une caractéristique qui a une importance fondamentale pour l’aspect du produit prélaqué.
L’appareillage requiert une éprouvette plane de taille supérieure à l’ouverture. Par conséquent, les surfaces irrégulières ne peuvent pas être mesurées.
Cette méthode s’applique à tous les revêtements, pigmentés ou non, y compris aux revêtements métalliques/nacrés. Cependant, pour les revêtements texturés, elle est seulement indicative.
Prevlečene kovine, ki se navijajo - Preskusne metode - 2. del: Sijaj
Standard EN 13523-2 določa postopek za določanje sijaja kovinske podlage. Sijaj je lastnost ključnega pomena, ko gre za videz prevlečenih izdelkov, ki se navijajo. Naprava zahteva raven vzorec, večji od odprtine, tako da neravnih površin ni mogoče izmeriti. Ta metoda se uporablja za vse pigmentirane in nepigmentirane prevleke, vključno s kovinskimi/bisernimi prevlekami. Kljub temu je za strukturirane premaze le okviren.
General Information
- Status
- Withdrawn
- Publication Date
- 17-Jun-2014
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 139 - Paints and varnishes
- Drafting Committee
- CEN/TC 139/WG 9 - Testing of coil coated metals
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 13-Oct-2021
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 03-Nov-2011
- Effective Date
- 25-Dec-2019
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 3887:2018 - Steels - Determination of the depth of decarburization (ISO 3887:2017) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 13523-2:2014 is a standard published by the European Committee for Standardization (CEN). Its full title is "Coil coated metals - Test methods - Part 2: Gloss". This standard covers: This part of EN 13523 specifies the procedure for determining the gloss of an organic coating on a metallic substrate. Gloss is a characteristic of fundamental importance to the appearance of the coil coated product. The apparatus requires a flat specimen of size greater than the aperture, thus, uneven surfaces cannot be measured. This method is applicable to all pigmented and unpigmented coatings including metallic/pearlescent coatings. However, for textured coatings it is only indicative.
This part of EN 13523 specifies the procedure for determining the gloss of an organic coating on a metallic substrate. Gloss is a characteristic of fundamental importance to the appearance of the coil coated product. The apparatus requires a flat specimen of size greater than the aperture, thus, uneven surfaces cannot be measured. This method is applicable to all pigmented and unpigmented coatings including metallic/pearlescent coatings. However, for textured coatings it is only indicative.
EN 13523-2:2014 is classified under the following ICS (International Classification for Standards) categories: 17.180.20 - Colours and measurement of light; 25.220.60 - Organic coatings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13523-2:2014 has the following relationships with other standards: It is inter standard links to EN 13523-2:2001, EN 13523-2:2021, EN 13523-0:2014, EN ISO 2813:2014, EN 23270:1991, EN ISO 14705:2021, EN ISO 4545-3:2005, EN ISO 3887:2018, EN ISO 4545-4:2018, EN ISO 4545-2:2005, EN ISO 4545-4:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13523-2:2014 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.MDMBandbeschichtete Metalle - Prüfverfahren - Teil 2: GlanzTôles prélaquées - Méthodes d'essai - Partie 2: BrillantCoil coated metals - Test methods - Part 2: Gloss25.220.60Organske prevlekeOrganic coatings17.180.20Barve in merjenje svetlobeColours and measurement of lightICS:Ta slovenski standard je istoveten z:EN 13523-2:2014SIST EN 13523-2:2014en,fr,de01-september-2014SIST EN 13523-2:2014SLOVENSKI
STANDARDSIST EN 13523-2:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-2
June 2014 ICS 25.220.60 Supersedes EN 13523-2:2001English Version
Coil coated metals - Test methods - Part 2: Gloss
Tôles prélaquées - Méthodes d'essai - Partie 2: Brillant
Bandbeschichtete Metalle - Prüfverfahren - Teil 2: Glanz This European Standard was approved by CEN on 7 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-2:2014 ESIST EN 13523-2:2014
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...