EN 13984:2004/A1:2006

SLOVENSKI STANDARD
01-marec-2007
Hidroizolacijski trakovi - Polimerni in elastomerni trakovi, ki kontrolirajo gibanje
vode in/ali vodne pare - Definicije in lastnosti
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions
and characteristics
Abdichtungsbahnen - Kunststoff- und Elastomer-Dampfsperrbahnen - Definitionen und
Eigenschaften
Feuilles souples d'étanchéité - Feuilles plastiques et élastomeres utilisées comme pare-
vapeur - Définitions et caractéristiques
Ta slovenski standard je istoveten z: EN 13984:2004/A1:2006
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13984:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 01.040.91; 91.100.50
English Version
Flexible sheets for waterproofing - Plastic and rubber vapour
control layers - Definitions and characteristics
Feuilles souples d'étanchéité - Feuilles plastiques et Abdichtungsbahnen - Kunststoff- und Elastomer-
élastomères utilisées comme pare-vapeur - Définitions et Dampfsperrbahnen - Definitionen und Eigenschaften
caractéristiques
This amendment A1 modifies the European Standard EN 13984:2004; it was approved by CEN on 5 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13984:2004/A1:2006: E
worldwide for CEN national Members.

Contents Page
Foreword.3
2 Normative r
...