FprEN 16584-3

SLOVENSKI STANDARD
01-julij-2022
Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi -
Splošne zahteve - 3. del: Značilnosti optike in trenja
Railway applications - Design for PRM use - General requirements - Part 3: Optical and
friction characteristics
Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Allgemeine
Anforderungen - Teil 3: Optische Eigenschaften und Rutschfestigkeit
Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences
générales - Partie 3 : Caractéristiques optiques et de friction
Ta slovenski standard je istoveten z: prEN 16584-3
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
45.020 Železniška tehnika na Railway engineering in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 16584-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2022
ICS 11.180.01; 45.020 Will supersede EN 16584-3:2017
English Version
Railway applications - Design for PRM use - General
requirements - Part 3: Optical and friction characteristics
Applications ferroviaires - Conception destinée à Bahnanwendungen - Gestaltung für die Nutzung durch
l'usage par les PMR - Exigences générales - Partie 3 : PRM - Allgemeine Anforderungen - Teil 3: Optische
Caractéristiques optiques et de friction Eigenschaften und Rutschfestigkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16584-3:2022 E
worldwide for CEN national Members.

prEN 16584-3:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 8
5 Requirements and assessment . 8
5.1 General. 8
5.2 Infrastructure . 8
5.2.1 Obstacle-free route . 8
5.2.2 Floor surfaces . 8
5.2.3 Transparent obstacles . 8
5.2.4 Lighting . 9
5.2.5 Visual information: signposting, pictograms, dynamic information . 10
5.2.6 Platform danger area and edge of platform . 10
5.2.7 Level track crossings . 10
5.3 Rolling stock . 11
5.3.1 Interior doors . 11
5.3.2 Lighting . 11
5.3.3 Access/egress steps . 11
5.4 Boarding aids . 11
6 Assessment methodologies . 11
6.1 Slip resistance test . 11
6.1.1 Principle . 11
6.1.2 Preparation and procedure . 11
6.1.3 Expression of results . 12
6.1.4 Test Report . 12
6.1.5 Friction test piece . 13
Annex A (informative) Colour temperature for lighting . 14
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive (EU) 2016/797 aimed to be covered . 15
Bibliography . 18

prEN 16584-3:2022 (E)
European foreword
This document (prEN 16584-3:2022) has been prepared by Technical Committee CEN/TC 256 “Railway
applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16584-3:2017.
In comparison with the previous edition, the following technical modifications have been made:
— the document template has been updated;
— the document has been revised generally for document references and editorial issues with
grammar;
— scope modified;
— normative references updated;
— terms and definitions revised;
— 5.1 References to Annex A (EC Verification) and B (Summary of Testing Requirements) removed;
— Annex A “EC verification - Interoperability constituents” removed;
— Annex B “Summary of testing requirements” removed;
— Annex ZA updated;
— Bibliography updated.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral part
of this document.
prEN 16584-3:2022 (E)
Introduction
This document is part of a suite of four ‘Design for PRM use’ standards that have in total nine parts:
— EN 16584 is a standard that covers both infrastructure and rolling stock — Railway applications —
Design for PRM use — General requirements:
— Part 1: Contrast (EN 16584-1)
— Part 2: Information (EN 16584-2)
— Part 3: Optical and friction characteristics (EN 16584-3)
— EN 16585 is a standard that covers rolling stock — Railway applications — Design for PRM use —
Equipment and components onboard rolling stock:
— Part 1: Toilets (EN 16585-1)
— Part 2: Elements for sitting, standing and moving (EN 16585-2)
— Part 3: Clearways and internal doors (EN 16585-3)
— EN 16586 is a standard that covers rolling stock — Railway applications — Design for PRM use —
Accessibility of persons with reduced mobility to rolling stock:
— Part 1: Steps for access and egress (EN 16586-1)
— Part 2: Boarding aids (EN 16586-2)
— EN 16587 is a standard that covers infrastructure — Railway applications — Design for PRM use —
Requirements for obstacle-free routes for infrastructure.
These standards aim to clarify the requirements (with clear and consistent terms and definitions) and to
define the associated criteria and, where appropriate, methodologies to allow a clear pass/fail
assessment.
prEN 16584-3:2022 (E)
1 Scope
This document describes the specific ‘Design for PRM use’ requirements applying to both infrastructure
and rolling stock and the assessment of those requirements. The following applies to this document:
— The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by
persons with disabilities and persons with reduced mobility as defined in the PRM TSI.
— This document defines elements that are universally valid for obstacle-free travelling including
lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions
and requirements of this document cover the infrastructure and rolling stock applications.
— This document only refers to aspects of accessibility for PRM passengers; it does not define non-PRM
related requirements and definitions.
— This document assumes that the infrastructure or rolling stock is in its defined operating condition.
— Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
— This document is not specifically intended for Urban Rail, however these standards or clauses from
these standards can be adopted by Urban Rail projects should they choose to do so.
The ‘General requirements’ standard is written in three parts:
— Part 1 contains
— Contrast
— Part 2 contains
— Spoken information
— Written information
— Tactile information
— Pictograms
— Audible signals
— This document is Part 3 and contains
— Lighting
— Low reflective properties
— Transparent obstacles
— Slip resistance
prEN 16584-3:2022 (E)
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1838, Lighting applications - Emergency lighting
EN 12464 (series), Light and lighting — Lighting of workplaces
EN 13272-1:2019, Railway applications - Electrical lighting for rolling stock in public transport systems -
Part 1: Heavy rail
prEN 16584-1:2022, Railway applications — Design for PRM use — General Requirements — Part 1:
Contrast
prEN 16584-2:2022, Railway applications — Design for PRM use — General Requirements —Part 2:
Information
prEN 16587:2022, Railway applications — Design for PRM use — Requirements for Obstacle-free Routes
for Infrastructure
EN ISO 2813, Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813)
ISO 4649, Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating
cylindrical drum device
ISO 21542, Building construction — Accessibility and usability of the built environment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1
contrast
perception of a difference visually between one surface or element of a building/rail vehicle and another
by reference to their light reflectance values (LRV) or luminance values
Note 1 to entry: See BS 8300-1 and BS 8300-2 for further information.
3.2
Light Reflectance Value (LRV)
total quantity of visible light that is reflected by a surface at all wavelengths and directions when
illuminated by a light source
N
...