iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 585:1994

(Main)

Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar

Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar

This European Standard specifies requirements for single or two-stage pressure regulators normally used for compressed gases up to 200 bar (20 MPa), for dissolved acetylene, for liquefied petroleum gases (LPG), methylacetylene-propadiene-mixtures (MPS) and carbondioxid.

Gasschweißgeräte - Druckminderer für Gasflaschen für Schweißen, Schneiden und verwandte Verfahren bis 200 bar

Diese Europäische Norm enthält Anforderungen für ein- oder zweistufige Druckminderer, die überlicherweise für verdichtete Gase bis 200 bar (20 MPa), für gelöstes Acetylen, für Flüssiggase (LPG), für Methylacetylen-Propadien-Gemische (MPS) und für Kohlenstoffdioxid verwendet werden.

Matériels de soudage aux gaz - Détendeurs pour bouteilles à gaz utilisés pour le soudage, le coupage et techniques connexes jusqu'à 200 bar

La présente norme européenne spécifie les caractéristiques des détendeurs à simple ou double détente, normalement employés pour les gaz comprimés jusqu'à 200 bar (20MPa), l'acétylène dissous les gaz de pétrole liquéfiés (GPL), les mélanges de méthylacéthylène et de propadiène (MPS) et le dioxyde de carbone.

Plinska varilna oprema - Regulatorji tlaka za plinske jeklenke za varjenje, rezanje in podobne postopke do 200 barov

General Information

Status
Withdrawn
Publication Date
29-Sep-1994
Withdrawal Date
31-Mar-1998
ICS
23.060.40 - Pressure regulators
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121/SC 7 - Equipment for gas welding, cutting and allied processes
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Apr-1998
Completion Date
01-Apr-1998
Ref Project
SIST EN 585:1995 - Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar

Relations

Replaced By
EN ISO 2503:1998 - Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998)
Effective Date
22-Dec-2008

Buy Standard

EN 585:1995EN 585:1995
PreviousNext
Standard + National Annex and/or Foreword
EN 585:1995
Foreword and/or annex in Slovenian language, body of the standard in German language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 2503:2009/A1:2015(Amendment)
Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009/Amd 1:2015)
SIST EN ISO 2503:2010/A1:2015

2014-08-22: Draft for // vote received in ISO/CS (see notification of 2014-08-12 in dataservice).
2013-05-28: Draft for // ENQ received in ISO/CS (see notification of 2013-05-27 in dataservice).

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    4 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7291:2010/A1:2015(Amendment)
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
SIST EN ISO 7291:2012/A1:2015

2014-08-12: Draft for // vote received in ISO/CS (see ISO notification of 2014-08-12 in dataservice).
2013-05-28: Draft for // ENQ received in ISO/CS (see ISO notification of 2013-05-27 in dataservice).

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7291:2010(Main)
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010)
SIST EN ISO 7291:2012

ISO 7291:2010 specifies requirements and test methods for pressure regulators in manifold systems used in welding, cutting, and allied processes for: a) compressed gases up to 30 MPa (300 bar); b) dissolved acetylene; c) liquefied petroleum gases (LPG); d) methylacetylene‑propadiene‑mixtures (MPS); e) carbon dioxide (CO2).
It is not applicable to pressure regulators fitted directly to the gas cylinders, as defined in ISO 2503.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2503:2009(Main)
Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009)
SIST EN ISO 2503:2010

ISO 2503:2009 specifies requirements for single or two-stage pressure regulators without flow-metering devices for connection to gas cylinders used for
compressed gases up to 300 bar (30 MPa),
dissolved acetylene,
liquefied petroleum gases (LPG),
methylacetylene‑propadiene mixtures (MPS), and
carbon dioxide (CO2),
for use in welding, cutting and allied processes. It does not cover pressure regulators having a nominal outlet pressure p2 > 20 bar.
ISO 2503:2009 also specifies requirements for single or two-stage pressure regulators with flow-metering devices for connection to gas cylinders used for
compressed gases or mixtures up to 300 bar (30 MPa), and
carbon dioxide (CO2),
for use in welding, cutting and allied processes. Typical processes using this equipment are: tungsten inert-gas arc welding (TIG), metal-arc inert-gas welding (MIG), metal-arc active-gas welding (MAG), plasma arc welding, tubular-cored-wiretubular-cored-wire welding and plasma cutting. Annex B gives examples of flow-control systems and their flow-measuring devices.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    36 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17924:2023(Main)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Guidance on hydrogen specific aspects
SIST-TP CEN/TR 17924:2023

This document gives guidance on hydrogen specific safety, design, construction, and performance requirements and testing of safety, control or regulating devices (hereafter referred to as controls) for burners and appliances burning gases with hydrogen content.
The following hydrogen concentrations are covered in this document:
- H2NG (hydrogen in natural gas) blends of 20 % hydrogen; or
- 100 % hydrogen; or
- varying blends / admixtures to natural gas.
Furthermore, it identifies the expected revision needs of the existing CEN/TC 58 standards as well as the need of potential further new standardization deliverables.

  • Technical report
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1854:2022(Main)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances
SIST EN 1854:2023

EN 13611:2019, Clause 1 applies with the following modification:
Modification:
The 1st paragraph of EN 13611:2019, Clause 1 is replaced by:
This document specifies the safety, design, construction, and performance requirements and testing of pressure sensing devices for burners and appliances burning one or more gaseous fuels.
This document is applicable to pressure sensing devices for gaseous fuels, air, or combustion products with declared maximum inlet pressures up to and including 500 kPa.
It applies to all types of pressure sensing devices, including electronic, differential and inferential types.
It also specifies requirements for pressure sensing devices which are intended to be applied to steam boilers and as such need to meet increased reliability requirements.
EN 13611:2019 Clause 1, 4th paragraph is not applicable.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16304:2022(Main)
Automatic vent valves for gas burners and gas burning appliances
SIST EN 16304:2022

EN 13611:2019, Clause 1 applies with the following modification and addition:
Modification:
The 1st paragraph of EN 13611:2019, Clause 1 is replaced by:
This document specifies the safety, design, construction, and performance requirements and testing for automatic vent valves for burners and appliances burning one or more gaseous fuels, hereafter referred to as “valves”.
This document is applicable to valves with declared maximum inlet pressures up to and including 500 kPa and of nominal connection sizes up to and including DN 100.
Addition:
This document is applicable to:
-   electrically actuated valves;
-   valves actuated by fluids where the control valves for these fluids are actuated electrically, but not to any external electrical devices for switching the control signal or actuating energy;
-   valves fitted with open position indicator switches.
The 4th paragraph of EN 13611:2019, Clause 1 is removed.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 88-3:2022(Main)
Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types
SIST EN 88-3:2022

EN 13611:2019, Clause 1 applies with the following modification and addition:
Modification:
The 1st paragraph of EN 13611:2019, Clause 1 is replaced by:
This document specifies the safety, design, construction, and performance requirements and testing for electronic pressure and/or flow rate regulators for burners and appliances burning one or more gaseous fuels, hereafter referred to as “regulators”.
This document is applicable to regulators with declared maximum inlet pressures up to and including 500 kPa and of nominal connection sizes up to and including DN 250.
Addition:
This document is applicable to:
-   regulators which use auxiliary energy;
-   regulators, which function by controlling a gas outlet pressure or a gas flow rate;
-   regulators with a modular structure specified as a unit;
-   regulators intended for gas appliances to be installed indoor or in the open air and exposed to the environment.
This document is not applicable to:
-   regulators connected directly to a gas distribution network or to a container that maintains a standard distribution pressure.
The 4th paragraph of EN 13611:2019, Clause 1 is removed.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12067-2:2022(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type
SIST EN 12067-2:2023

EN 13611:2019, Clause 1 is replaced by the following:
This document specifies the safety, design, construction and performance requirements, and testing for electronic fuel/air ratio control systems (ERC), electronic fuel/air ratio supervision systems (ERS) and electronic fuel/air ratio trim systems (ERT) intended for use with burners and appliances burning gaseous or liquid fuels. It also describes the procedures for evaluating these requirements and specifies information necessary for installation and use.
This document is applicable to:
-   closed loop fuel/air ratio control systems, see 3.101;
-   fuel/air ratio supervision systems, see 3.102;
-   closed loop fuel/air ratio trim systems, see 3.103;
and does not differentiate into classification by heat input.
NOTE   The documents for burners, appliances or processes which use ERC, ERS or ERT can override the requirements of this document.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1643:2022(Main)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Valve proving systems for automatic shut-off valves
SIST EN 1643:2023

EN 13611:2019, Clause 1 is replaced by following:
This document specifies the safety, design, construction and performance requirements, and testing for valve-proving systems, hereafter referred to as “VPS”, intended for use with gas burners and gas-burning appliances burning one or more gaseous fuels.
This document applies to all types of VPS used for the automatic detection of leakage in a gas burner section having at least two automatic shut-off valves, and which give a signal if the leakage of one of the valves, the piping in-between the valves or of the VPS itself and its components exceeds the detection limit.
This document applies to VPS for gases with a maximum inlet pressure up to and including 500 kPa.
This document does not apply to VPSs for use in explosive atmospheres.
This document is applicable to AC and DC supplied VPS (for VPS supplied by stand-alone battery system, battery systems for mobile applications, or VPS which are intended to be connected to DC supply networks, see Annex I).

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day