EN 12451:1999
(Main)Copper and copper alloys - Seamless, round tubes for heat exchangers
Copper and copper alloys - Seamless, round tubes for heat exchangers
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for heat exchangers, condensers, evaporators and desalination equipment, supplied in the size range from 6 mm up to and including 76 mm outside diameter and from 0,5 mm up to and including 3 mm wall thickness. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.
Kupfer und Kupferlegierungen - Nahtlose Rundrohre für Wärmeaustauscher
Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften, Grenzabmaße und Formtoleranzen für nahtlosgezogene Rundrohre aus Kupfer und Kupferlegierungen für Wärmeaustauscher, Kondensatoren, Verdampfer und Entsalzungsanlagen fest. Diese Norm gilt für den Maßbereich von 6 mm bis 76 mm Außendurchmesser und von 0,5 mm bis 3 mm Wanddicke.
Cuivre et alliages de cuivre - Tubes ronds sans soudure pour échangeurs thermiques
La présente norme européenne spécifie la composition, les caractéristiques et les tolérances de dimensions et de formes des tubes ronds sans soudure en cuivre et alliages de cuivre destinés aux échangeurs thermiques, aux condenseurs, aux évaporateurs et aux installations de désalinisation, fournis dans une plage de diamètre extérieur de 6 mm à 76 mm compris, et d'épaisseur de paroi de 0,5 mm à 3 mm compris.
Baker in bakrove zlitine - Nevarjene cevi z okroglim prerezom za toplotne izmenjevalnike
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jul-1999
- Withdrawal Date
- 15-May-2012
- Technical Committee
- CEN/TC 133 - Copper and copper alloys
- Drafting Committee
- CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-May-2012
- Completion Date
- 16-May-2012
Relations
- Effective Date
- 28-Nov-2009
Frequently Asked Questions
EN 12451:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Seamless, round tubes for heat exchangers". This standard covers: This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for heat exchangers, condensers, evaporators and desalination equipment, supplied in the size range from 6 mm up to and including 76 mm outside diameter and from 0,5 mm up to and including 3 mm wall thickness. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for heat exchangers, condensers, evaporators and desalination equipment, supplied in the size range from 6 mm up to and including 76 mm outside diameter and from 0,5 mm up to and including 3 mm wall thickness. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.
EN 12451:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.15 - Non-ferrous metal pipes; 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12451:1999 has the following relationships with other standards: It is inter standard links to EN 12451:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12451:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12451:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2000
Baker in bakrove zlitine - Nevarjene cevi z okroglim prerezom za toplotne
izmenjevalnike
Copper and copper alloys - Seamless, round tubes for heat exchangers
Kupfer und Kupferlegierungen - Nahtlose Rundrohre für Wärmeaustauscher
Cuivre et alliages de cuivre -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...