prEN ISO 8367-1

SLOVENSKI STANDARD
01-november-2025
Embalaža - Dovoljena odstopanja mer večnamenskih vreč - 1. del: Papirnate vreče
(ISO/DIS 8367-1:2025)
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks
(ISO/DIS 8367-1:2025)
Verpackung - Maßtoleranzen für Säcke für die allgemeine Verwendung - Teil 1:
Papiersäcke (ISO/DIS 8367-1:2025)
Emballages - Tolérances dimensionnelles des sacs d'usage général - Partie 1: Sacs en
papier (ISO/DIS 8367-1:2025)
Ta slovenski standard je istoveten z: prEN ISO 8367-1
ICS:
55.080 Vreče. Vrečke Sacks. Bags
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 8367-1
ISO/TC 122/SC 3
Packaging — Dimensional
Secretariat: BSI
tolerances for general purpose
Voting begins on:
sacks —
2025-09-02
Part 1:
Voting terminates on:
2025-11-25
Paper sacks
Emballages — Tolérances dimensionnelles des sacs d'usage
général —
Partie 1: Sacs en papier
ICS: 55.080
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 8367-1:2025(en)
DRAFT
ISO/DIS 8367-1:2025(en)
International
Standard
ISO/DIS 8367-1
ISO/TC 122/SC 3
Packaging — Dimensional tolerances
Secretariat: BSI
for general purpose sacks —
Voting begins on:
Part 1:
Paper sacks
Voting terminates on:
Emballages — Tolérances dimensionnelles des sacs d'usage
général —
Partie 1: Sacs en papier
ICS: 55.080
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 8367-1:2025(en)
ii
ISO/DIS 8367-1:2025(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensional tolerances . 1

iii
ISO/DIS 8367-1:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of
...