EN ISO 11897:2001

SLOVENSKI STANDARD
01-januar-2002
(PEDODåD9UHþHL]WHUPRSODVWLþQHIROLMH5D]WUåQDRGSRUQRVWSURWLSUHJLEX,62

Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge
folds (ISO 11897:1999)
Verpackung - Säcke aus thermoplastischer Kunststofffolie - Weiterreißfestigkeit an
Falzkanten (ISO 11897:1999)
Emballages - Sacs faits d'un film thermoplastique flexible - Propagation de la déchirure
sur les plis de bordure (ISO 11897:1999)
Ta slovenski standard je istoveten z: EN ISO 11897:2001
ICS:
55.080 9UHþH9UHþNH Sacks. Bags
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11897
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 55.080
English version
Packaging - Sacks made from thermoplastic flexible film - Tear
propagation on edge folds (ISO 11897:1999)
Emballages - Sacs faits d'un film thermoplastique flexible - Verpackung - Säcke aus thermoplastischer Kunststofffolie -
Propagation de la déchirure sur les plis de bordure (ISO Weiterreißfestigkeit an Falzkanten (ISO 11897:1999)
11897:1999)
This European Standard was approved by CEN on 11 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11897:2001 E
worldwide for CEN national Members.

Page 2
CORRECTED 2001-08-15
Foreword
The text of the International Standard from Technical Committee ISO/TC 122 "Packaging" of the
International Organization for Standardization (ISO) has been taken over as a European Standard by
Technical Committee CEN/TC 261 "Packaging", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2001, and conflicting national standards
shall be withdrawn at the latest by December 2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 11897:1999 has been approved by CEN as a European
Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).

Page 3
Annex ZA (normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this European Standard only when incorporated in it by amendment or revision. For undated
references the latest edition of the publication referred to applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated by
(mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 527-3 1995 Plastics - Determination of tensile EN ISO 527-3 1995
properties - Part 3: Test conditions for
films and sheets
ISO 2233 1994 Packaging - Complete, filled transport EN ISO 2233 1999
packages - Conditioning for testing

INTERNATIONAL ISO
STANDARD 11897
First edition
1999-03-01
Packaging — Sacks made from
thermoplastic flexible film — Tear
propagation on edge folds
Emballages — Sacs faits d'un film thermoplastique flexible — Propagation
de la déchirure sur les plis de bordure
A
Reference number
ISO 11897:1999(E)
ISO 11897:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard IS
...