Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification

This European Standard specifies the required characteristics, inspections, tests, quality assurance requirements, conditions for qualification acceptance and delivery of quick release fastening systems.
This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area.
It may be applied when referred to in the product standard or in a design specification.

Luft- und Raumfahrt - Schnellverschlüsse für nicht-strukturelle Anwendungen - Teil 01: Technische Lieferbedingungen

Diese Europäische Norm legt die erforderlichen Kennwerte, Inspektionen, Prüfungen, Anforderungen an die Qualitätssicherung und die Qualifikations , Annahme  und Lieferbedingungen für Schnellverschlüsse fest.
Diese Europäische Norm gilt für alle Verschlusssysteme, die bei der Inneneinrichtung von Luftfahrzeugen und in nicht-strukturellen oder Sekundärstrukturbereichen verwendet werden.
Sie kann angewendet werden, wenn in der Produktnorm oder in Planungsunterlagen auf sie verwiesen wird.

Série aérospatiale - Fixations rapides filetées pour applications non-structurales - Partie 01 : Spécification technique

La présente Norme européenne spécifie les caractéristiques, les contrôles, les essais, les exigences d’assurance de la qualité, les conditions de qualification relatives à la réception et à la livraison requis pour les fixations rapides filetées.
La présente Norme européenne s’applique à toutes les fixations pour utilisation dans les équipements intérieurs et les zones non structurales ou structurales secondaires du fuselage.
Elle peut s’appliquer lorsqu’elle est citée en référence dans la norme de produit ou la spécification de conception.

Aeronavtika - Spončni sistemi za hitro sprostitev za nestrukturne aplikacije - 001. del: Tehnična specifikacija

Ta evropski standard določa zahtevane lastnosti, preglede, preskuse, zahteve za zagotavljanje kakovosti, pogoje za odobritev kvalifikacije in dostavo spončnega sistema za hitro sprostitev. Ta evropski standard velja za vse spončne sisteme, ki se uporabljajo v notranji opremi v trupu letala ter nestrukturnem ali sekundarnem strukturnem območju.
Lahko se uporablja v primerih, ko je naveden v standardu izdelka ali v specifikaciji zasnove.

General Information

Status
Withdrawn
Publication Date
06-Oct-2015
Withdrawal Date
30-Oct-2018
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
31-Oct-2018

Relations

Buy Standard

Standard
EN 4710-001:2015
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Druckverschlüsse nicht-strukturelle Anwendungen - Teil 001: Technische LieferbedingungenSérie aérospatiale - Fixations rapides filetées pour applications non-structurales - Partie 001 : Spécification techniqueAerospace series - Quick release fastening systems for non-structural applications - Part 001: Technical specification49.030.01Vezni elementi na splošnoFasteners in generalICS:Ta slovenski standard je istoveten z:EN 4710-01:2015SIST EN 4710-001:2015en,fr,de01-december-2015SIST EN 4710-001:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4710-01
October
t r s w ICS
v {ä r u w English Version
Aerospace series æ Quick release fastening systems for nonæstructural applications æ Part
r sã Technical specification Série aérospatiale æ Fixations rapides filetées pour applications nonæstructurales æ Partie
r s ã Spécification technique
Luftæ und Raumfahrt æ Schnellverschlüsse für nichtæstrukturelle Anwendungen æ Teil
r sã Technische Lieferbedingungen This European Standard was approved by CEN on
w March
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v y s ræ r sã t r s w ESIST EN 4710-001:2015

Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Requirements . 5 5 Inspections and tests . 5 6 Test equipment and parameters . 9 7 Quality assurance . 10 8 Sampling . 10
This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area. It may be applied when referred to in the product standard or in a design specification. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series — Marking of aerospace products EN 2826, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating heat and flames — Determination of gas components in the smoke EN 3844-2, Aerospace series — Flammability of non metallic materials — Part 2: Small burner test, horizontal — Determination of the horizontal flame propagation EN 9100, Quality Management Systems — Requirements for Aviation, Space and Defense Organizations
EN 9102:2006, Aerospace series — Quality systems — First article inspection EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts EN 10204, Metallic products — Types of inspection documents EN ISO 8785, Geometrical product specification (GPS) — Surface imperfections — Terms, definitions and parameters (ISO 8785) EN ISO 9001, Quality management systems — Requirements (ISO 9001) EN ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227) FAR/JAR/CS 25.853, Compartment Interiors 1) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 fasteners quick release fastening systems are parts, capable of being easily and quickly operated, with or without usage of special tools for closing and opening, for fastening and release of parts such as covers, linings, equipment, etc.
1) Published by: European Aviation Safety Agency, Postfach 101253, D-50452 Koeln, Germany. SIST EN 4710-001:2015
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.