EN 13415:2010
(Main)Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
This European Standard specifies a test method to measure the electrical resistance as a material physical parameter of an adhesive film and composites of floor covering material and adhesive film. The electrical resistance is reciprocal to the electrical conductivity. This laboratory method does not take account of all influences which may occur in practice.
In contrast to EN 1081, which applies to the determination of the electrical resistance of resilient floor coverings R1, R2 and R3 (see Clause 3), this method applies to the determination of the electrical resistance of adhesive films on glass respectively composites of floor coverings adhesively bonded to a fibre cement substrate R4 and R5 (see Clause 3).
Prüfung von Klebstoffen für Bodenbeläge - Bestimmung des elektrischen Widerstandes von Klebstoff-Filmen und Verbunden
Diese Europäische Norm legt ein Prüfverfahren zur Messung des elektrischen Widerstandes als werkstoff-physikalischen Parameter eines Klebstoff-Films und von Verbunden aus einem Bodenbelag und einem Klebstoff-Film fest. Der elektrische Widerstand ist der Kehrwert der elektrischen Leitfähigkeit. Bei diesem Laborverfahren werden nicht alle Einflüsse, die in der Praxis vorkommen können, berücksichtigt. Im Gegensatz zu EN 1081, die sich mit der Bestimmung des elektrischen Widerstandes von elastischen Bodenbelägen R1, R2 und R3 (siehe Abschnitt 3) befasst, wird dieses Verfahren zur Bestimmung des elektrischen Widerstandes von Klebstoff-Filmen auf Glas und von Verbunden von auf einen Faserzement-träger geklebten Bodenbelägen R4 und R5 (siehe Abschnitt 3) angewendet.
Essai des adhésifs pour revêtements de sol - Détermination de la résistance électrique des composites et films d'adhésif
La présente Norme européenne spécifie une méthode d’essai permettant de mesurer la résistance électrique,
en tant que paramètre physique, d’un film d’adhésif et de composites constitués d’un matériau de revêtement
de sol et d’un film d’adhésif. La résistance électrique est l’inverse de la conductance électrique. La présente
méthode de laboratoire ne prend pas en compte la totalité des influences susceptibles de se manifester en
pratique.
Contrairement à l’EN 1081 qui s’applique à la détermination de la résistance électrique des revêtements de
sols résilients R1, R2 et R3 (voir Article 3), la présente méthode s’applique à la détermination de la résistance
électrique des films d’adhésif sur le verre et des composites de revêtements de sol liés par adhésion à un
substrat de fibre-ciment R4 et R5 (voir Article 3).
Preskusna metoda za lepila za talne obloge - Določanje električne upornosti lepilnih filmov in kompozitov
Ta evropski standard določa preskusno metodo za izmero električne upornosti kot fizičnega parametra materiala lepilnega filma in kompozitov talnih oblog in lepilnih filmov. Električna upornost je v obratnem sorazmerju z električno prevodnostjo. Ta laboratorijska metoda ne upošteva vseh vplivov, do kateri lahko pride v praksi. V nasprotju z EN 1081, ki velja za določanje električne upornosti elastičnih talnih oblog R1, R2 in R3 (glej Klavzulo 3), ta metoda velja za določanje električne upornosti na lepilnih filmih na steklenih in kompozitnih talnih oblogah, ki so zalepljene na substrat vlaknatega cementa R4 in R5 (glej Klavzulo 3)..
General Information
- Status
- Withdrawn
- Publication Date
- 12-Jan-2010
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 193 - Adhesives
- Drafting Committee
- CEN/TC 193/WG 4 - Building adhesives
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 31-Jul-2019
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 07-Aug-2019
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN 13415:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites". This standard covers: This European Standard specifies a test method to measure the electrical resistance as a material physical parameter of an adhesive film and composites of floor covering material and adhesive film. The electrical resistance is reciprocal to the electrical conductivity. This laboratory method does not take account of all influences which may occur in practice. In contrast to EN 1081, which applies to the determination of the electrical resistance of resilient floor coverings R1, R2 and R3 (see Clause 3), this method applies to the determination of the electrical resistance of adhesive films on glass respectively composites of floor coverings adhesively bonded to a fibre cement substrate R4 and R5 (see Clause 3).
This European Standard specifies a test method to measure the electrical resistance as a material physical parameter of an adhesive film and composites of floor covering material and adhesive film. The electrical resistance is reciprocal to the electrical conductivity. This laboratory method does not take account of all influences which may occur in practice. In contrast to EN 1081, which applies to the determination of the electrical resistance of resilient floor coverings R1, R2 and R3 (see Clause 3), this method applies to the determination of the electrical resistance of adhesive films on glass respectively composites of floor coverings adhesively bonded to a fibre cement substrate R4 and R5 (see Clause 3).
EN 13415:2010 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13415:2010 has the following relationships with other standards: It is inter standard links to EN 13415:2002, EN ISO 22637:2019, EN ISO 15605:2004, EN 923:2005+A1:2008, EN 915:1996, EN ISO 9142:2003, EN 1067:2005, EN 1081:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13415:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfung von Klebstoffen für Bodenbeläge - Bestimmung des elektrischen Widerstandes von Klebstoff-Filmen und VerbundenAdhésifs - Essai de adhésifs pour revêtements de sol - Détermination de la résistance électrique des films d'adhésifsTest of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 13415:2010SIST EN 13415:2010en,fr,de01-marec-2010SIST EN 13415:2010SLOVENSKI
STANDARDSIST EN 13415:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13415
January 2010 ICS 83.180 Supersedes EN 13415:2002English Version
Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
Essai des adhésifs pour revêtements de sol - Détermination de la résistance électrique des composites et films d'adhésif
Prüfung von Klebstoffen für Bodenbeläge - Bestimmung des elektrischen Widerstandes von Klebstoff-Filmen und Verbunden This European Standard was approved by CEN on 28 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13415:2010: ESIST EN 13415:2010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...