EN ISO 21083-1:2018
(Main)Test method to measure the efficiency of air filtration media against spherical nanomaterials - Part 1: Size range from 20 nm to 500 nm (ISO 21083-1:2018)
Test method to measure the efficiency of air filtration media against spherical nanomaterials - Part 1: Size range from 20 nm to 500 nm (ISO 21083-1:2018)
This document specifies the testing instruments and procedure for determining the fractional filtration efficiencies of flat sheet filter medium against airborne nanoparticles in the range of 20 nm to 500 nm. The testing methods in this document are limited to spherical or nearly-spherical particles to avoid uncertainties due to the particle shape.
Prüfverfahren zur Messung der Effizienz von Luftfiltrationsmedien gegen sphärische Nanomaterialien - Teil 1: Partikelgrößenbereich von 20 nm bis 500 nm (ISO 21083-1:2018)
Dieses Dokument legt die Prüfinstrumente und Prüfverfahren für die Bestimmung des Filtrationswirkungsgrads von planen Filtermedien gegen Nanoschwebstoffpartikel im Größenbereich zwischen 20 nm und 500 nm fest. Die Prüfverfahren in diesem Dokument sind auf kugelförmige oder fast kugelförmige Partikel beschränkt, um Unsicherheiten aufgrund der Partikelform zu vermeiden.
Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 1: Spectre granulométrique de 20 nm à 500 nm (ISO 21083-1:2018)
Le présent document spécifie les instruments et modes opératoires d'essai à utiliser pour la détermination des efficacités fractionnelles de filtration des médias filtrants plans par rapport à des nanoparticules en suspension dans l'air dans la plage granulométrique de 20 nm à 500 nm. Les méthodes d'essai décrites dans le présent document sont limitées aux particules sphériques ou quasi-sphériques afin d'éviter toute incertitude liée à la forme des particules.
Preskusna metoda za merjenje učinkovitosti sredstev za filtriranje zraka, ki vsebuje kroglaste nanomateriale - 1. del: Velikost od 20 nm do 500 nm (ISO 21083-1:2018)
Ta dokument določa preskusne instrumente in postopek za učinkovitost filtracije ploščatih filtrirnih medijev za filtriranje zraka, ki vsebuje kroglaste nanomateriale v obsegu 20–500 nm.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2019
3UHVNXVQDPHWRGD]DPHUMHQMHXþLQNRYLWRVWLVUHGVWHY]DILOWULUDQMH]UDNDNL
YVHEXMHNURJODVWHQDQRPDWHULDOHGHO 9HOLNRVWRGQPGRQP ,62
Test method to measure the efficiency of air filtration media against spherical
nanomaterials - Part 1: Size range from 20 nm to 500 nm (ISO 21083-1:2018)
Prüfverfahren zur Messung der Effizienz von Luftfiltrationsmedien gegen sphärische
Nanomaterialien - Teil 1: Partikelgrößenbereich von 20 nm bis 500 nm (ISO 21083-
1:2018)
Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux
nanomatériaux sphériques - Partie 1: Spectre granulométrique de 20 nm à 500 nm (ISO
21083-1:2018)
Ta slovenski standard je istoveten z: EN ISO 21083-1:2018
ICS:
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 21083-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 91.140.30
English Version
Test method to measure the efficiency of air filtration
media against spherical nanomaterials - Part 1: Size range
from 20 nm to 500 nm (ISO 21083-1:2018)
Méthode d'essai pour mesurer l'efficacité des médias Prüfverfahren zur Messung der Effizienz von
de filtration d'air par rapport aux nanomatériaux Luftfiltrationsmedien gegen sphärische
sphériques - Partie 1: Spectre granulométrique de 20 Nanomaterialien - Teil 1: Partikelgrößenbereich von
nm à 500 nm (ISO 21083-1:2018) 20 nm bis 500 nm (ISO 21083-1:2018)
This European Standard was approved by CEN on 19 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21083-1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 21083-1:2018) has been prepared by Technical Committee ISO/TC 142
"Cleaning equipment for air and other gases" in collaboration with Technical Committee CEN/TC 195
“Air filters for general air cleaning” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 21083-1:2018 has been approved by CEN as EN ISO 21083-1:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 21083-1
First edition
2018-11
Test method to measure the efficiency
of air filtration media against
spherical nanomaterials —
Part 1:
Size range from 20 nm to 500 nm
Méthode d'essai pour mesurer l'efficacité des médias de filtration
d'air par rapport aux nanomatériaux sphériques —
Partie 1: Spectre granulométrique de 20 nm à 500 nm
Reference number
ISO 21083-1:2018(E)
©
ISO 2018
ISO 21083-1:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 21083-1:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Symbols and abbreviated terms. 2
4 Principle . 3
5 Test materials . 4
5.1 General . 4
5.2 Liquid phase aerosol . 4
5.2.1 DEHS test aerosol . 4
5.2.2 Liquid phase aerosol generation . 5
6 Test setup . 6
6.1 General . 6
6.2 Specification of setup . 8
6.2.1 Aerosol generation system . 8
6.2.2 Tubing . 8
6.2.3 Dryer. 8
6.2.4 DEMC . 9
6.2.5 Equilibrium charge distribution and neutralization of aerosol particles .11
6.2.6 Neutralization of aerosol particles .11
6.2.7 Make-up air line .12
6.2.8 Test filter medium mounting assembly .13
6.2.9 CPC .14
6.2.10 Final filter .16
6.3 Detailed setup for test using DEHS particles .16
6.4 Determination of the filter medium velocity .17
7 Qualification of the test rig and apparatus.17
7.1 CPC tests .17
7.1.1 CPC — Air flow rate stability test .17
7.1.2 CPC — Zero test .18
7.1.3 CPC — Overload test . .18
7.1.4 Counting accuracy calibration .18
7.2 DEMC tests .21
7.3 Qualification of aerosol neutralization .21
7.3.1 General.21
7.3.2 Qualification of neutralization by checking the multiple charge fraction on
the particles passing through the neutralizer .21
7.3.3 Qualification of the aerosol neutralizer using corona discharge balanced
output .21
7.3.4 Qualification of neutralization according to ISO/TS 19713-1 .22
7.4 System leak checks .22
7.4.1 Air leakage tests .22
7.4.2 Visual detection by cold smoke .22
7.4.3 Pre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.