EN 1307:2014/FprA1
(Amendment)Textile floor coverings - Classification
Textile floor coverings - Classification
This European Standard specifies the requirements for classification of all textile floor coverings and carpet tiles, excluding rugs and runners (see ISO 2424) into use classes with regard to one or more of the following properties: wear, appearance retention, additional performance properties and classes for luxury rating.
This European Standard refers to the classification as defined in EN ISO 10874.
Textile Bodenbeläge - Einstufung
Revêtements de sol textiles - Classement d'usage
Tekstilne talne obloge - Razvrščanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2015
7HNVWLOQHWDOQHREORJH5D]YUãþDQMH
Textile floor coverings - Classification
Textile Bodenbeläge - Einstufung
Revêtements de sol textiles - Classement d'usage
Ta slovenski standard je istoveten z: EN 1307:2014/FprA1
ICS:
59.080.60 Tekstilne talne obloge Textile floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 1307:2014
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2015
ICS 59.080.60
English Version
Textile floor coverings - Classification
Revêtements de sol textiles - Classement d'usage Textile Bodenbeläge - Einstufung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 134.
This draft amendment A1, if approved, will modify the European Standard EN 1307:2014. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1307:2014/FprA1:2015 E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modification to Clause 5, Identification requirements .4
2 Modifications to Clause 6, Basic requirements .4
3 Modification to 10.2, Abrasion resistance – Lisson test - Mass loss per unit area (m ) .5
V
4 Modification to 10.5, Change in appearance .6
5 Modifications to Annex C, Criteria for the assessment of stair suitability .6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.