EN 485-1:1993
(Main)Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
This standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy sheet, strip and plate for general engineering applications. It applies to products with a thickness over 0,20 mm up to and including 200 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special applicatios such as aerospace , can stock, finstock, etc. which are dealt with in separate European Standards.
Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten - Teil 1: Technische Lieferbedingungen
Diese Norm legt die technischen Lieferbedingungen für Bänder, Bleche und Platten aus Aluminium und Aluminium-Knetlegierungen für allgemeine Verwendungen fest. Sie gilt für Erzeugnisse mit einer Dicke über 0,20 mm bis 200 mm. Sie gilt nicht für Vorwalzbänder und nicht für Sonderanwendungen, wie beispielsweise Luft- und Raumfahrt, Herstellung von Dosen und Verschlüssen,Wärmeaustauscher usw., welche Gegenstand besonderer Europäischer Normen sind.
Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses - Partie 1: Conditions techniques de contrôle et de livraison
La présente norme spécifie les conditions techniques de contrôle et de livraison des tôles, bandes et tôles épaisses en aluminium et alliages d'aluminium pour usages généraux. Elle s'applique aux produits d'épaisseur supérieure à 0,20 mm et au plus égale à 200 mm. Elle ne s'applique pas aux demi-produits laminés, livrés en bobine, destinés à être relaminés (ébauches) ni aux applications spéciales telles que la construction aéronautique, le boîtage, les échangeurs etc. qui font l'objet de normes européennes particulières.
Aluminij in aluminijeve zlitine - Pločevine, trakovi in plošče - 1. del: Tehnični pogoji za prevzem in dobavo
General Information
- Status
- Withdrawn
- Publication Date
- 14-Oct-1993
- Withdrawal Date
- 11-Mar-2008
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 7 - Sheets, strips and plates
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Mar-2008
- Completion Date
- 12-Mar-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Referred By
EN 1999-1-1:2007 - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 485-1:1993 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery". This standard covers: This standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy sheet, strip and plate for general engineering applications. It applies to products with a thickness over 0,20 mm up to and including 200 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special applicatios such as aerospace , can stock, finstock, etc. which are dealt with in separate European Standards.
This standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy sheet, strip and plate for general engineering applications. It applies to products with a thickness over 0,20 mm up to and including 200 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special applicatios such as aerospace , can stock, finstock, etc. which are dealt with in separate European Standards.
EN 485-1:1993 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 485-1:1993 has the following relationships with other standards: It is inter standard links to EN 485-1:2008, EN 1396:2007, EN 1999-1-1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 485-1:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH3ORþHYLQHWUDNRYLLQSORãþHGHO 7HKQLþQLSRJRML
]DSUHY]HPLQGREDYR
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for
inspection and delivery
Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten - Teil 1: Technische
Lieferbedingungen
A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...