EN 888:2023

SLOVENSKI STANDARD
01-maj-2023
Nadomešča:
SIST EN 888:2005
Kemikalije, ki se uporabljajo za pripravo pitne vode - Železov (III) klorid
Chemicals used for treatment of water intended for human consumption - Iron (III)
chloride
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Eisen(III)chlorid
Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation
humaine - Chlorure de fer (III)
Ta slovenski standard je istoveten z: EN 888:2023
ICS:
13.060.20 Pitna voda Drinking water
71.100.80 Kemikalije za čiščenje vode Chemicals for purification of
water
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 888
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2023
EUROPÄISCHE NORM
ICS 71.100.80 Supersedes EN 888:2004
English Version
Chemicals used for treatment of water intended for human
consumption - Iron (III) chloride
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Wasser für den
destinée à la consommation humaine - Chlorure de fer menschlichen Gebrauch - Eisen(III)chlorid
(III)
This European Standard was approved by CEN on 25 December 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 888:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Description . 6
4.1 Identification . 6
4.1.1 Chemical names . 6
4.1.2 Synonym or common names . 6
4.1.3 Relative molecular mass . 6
4.1.4 Empirical formula . 7
4.1.5 Chemical formula . 7
4.1.6 CAS Registry Number . 7
4.1.7 EINECS reference . 7
4.2 Commercial forms . 7
4.3 Physical properties . 7
4.3.1 Appearance . 7
4.3.2 Density . 7
4.3.3 Solubility (in water) . 7
4.3.4 Vapour pressure . 8
4.3.5 Boiling point at 100 kPa . 8
4.3.6 Melting and freezing point . 8
4.3.7 Specific heat . 8
4.3.8 Viscosity (dynamic) . 8
4.3.9 Critical temperature . 8
4.3.10 Critical pressure . 8
4.3.11 Physical hardness . 8
4.4 Chemical properties . 8
5 Purity criteria . 8
5.1 General . 8
5.2 Composition of commercial product . 9
5.3 The grade of the product . 9
5.4 The type of the product . 9
6 Test methods . 10
6.1 Sampling . 10
6.2 Analyses . 10
7 Labelling - Transportation - Storage . 10
7.1 Means of delivery . 10
7.2 Risk and safety labelling according to the EU Directives . 10
7.3 Transportation regulations and labelling . 12
7.4 Marking . 12
7.5 Storage . 12
7.5.1 Long term stability . 12
7.5.2 Storage incompatibilities . 12
Annex A (informative) General information on iron (III) chloride . 13
A.1 Origin . 13
A.1.1 Raw materials . 13
A.2 Manufacturing process . 13
A.2.1 General . 13
A.2.2 Quality of commercial product . 13
A.3 Use . 15
A.3.1 Function . 15
A.3.2 Form in which it is used. 15
A.3.3 Treatment dose . 15
A.3.4 Means of application . 15
A.3.5 Secondary effects . 15
A.3.6 Removal of excess product . 16
Annex B (normative) General rules relating to safety . 17
B.1 Rules for safe handling and use . 17
B.2 Emergency procedures . 17
B.2.1 First aid . 17
B.2.2 Spillage . 17
B.2.3 Fire . 17
Bibliography . 18

European foreword
This document (EN 888:2023) has been prepared by Technical Committee CEN/TC 164 “Water supply”,
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2023, and conflicting national standards shall
be withdrawn at the latest by August 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 888:2004.
— removal of the analytical methods from this standard and addition of reference to EN 17215 as
analytical method standard;
— update of the information of risk and safety labelling of the product to comply with the new
regulations (see 7.2 and [2]);
— update of the information related to Drinking Water Directive.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of th
...