CEN/TS 17724:2022

SLOVENSKI STANDARD
01-februar-2023
Rastlinski biostimulanti - Terminologija
Plant Biostimulants - Terminology
Pflanzen-Biostimulanzien - Terminologie
Biostimulants des végétaux - Terminologie
Ta slovenski standard je istoveten z: CEN/TS 17724:2022
ICS:
01.040.65 Kmetijstvo (Slovarji) Agriculture (Vocabularies)
65.080 Gnojila Fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN/TS 17724
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
March 2022
TECHNISCHE SPEZIFIKATION
ICS 65.080
English Version
Plant biostimulants - Terminology
Biostimulants des végétaux - Terminologie Biostimulanzien für die pflanzliche Anwendung -
Terminologie
This Technical Specification (CEN/TS) was approved by CEN on 3 January 2022 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17724:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
3.1 Claims . 5
3.2 Terms relating to components . 11
3.3 Terms relating to application method . 17
3.4 Terms relating to sample preparation . 19
3.5 Terms relating to physical form . 19
3.6 Others terms relating to plant biostimulants . 20
Bibliography . 23

European foreword
This document (CEN/TS 17724:2022) has been prepared by Technical Committee CEN/TC 455 “Plant
Biostimulants”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
This document was prepared by the experts of CEN/TC 455 “Plant Biostimulants”. The European
Committee for Standardization (CEN) was requested by the European Commission (EC) to draft
European standards or European standardization deliverables to support the implementation of
Regulation (EU) 2019/1009 of the European Parliament and of the Council of 5 June 2019 laying down
rules on the making available on the market of EU fertilising products (“FPR” or “Fertilising Products
Regulation”). This standardization request, presented as M/564, also contributes to the Communication
on “Innovating for Sustainable Growth: A Bio economy for Europe”. Working Group 5 “Labelling and
denominations” was created to develop a work program as part of this standardization request.
Technical Committee CEN/TC 455 “Plant Biostimulants” was established to carry out the work program
that will prepare a series of standards. The interest in biostimulants has increased significantly in
Europe as a valuable tool to use in agriculture. Standardization was identified as having an important
role in order to promote the use of biostimulants. The work of CEN/TC 455 seeks to improve the
reliability of the supply chain, thereby improving the confidence of farmers, industry, and consumers in
biostimulants, and will promote and support commercialization of the European biostimulant industry.
1 Scope
This document specifies the terms and definitions referred to all the plant biostimulant field and it is
constituted by 6 subclauses:
3.1 Claims
3.2 Terms relating to components
3.3 Terms relating to application method
3.4 Terms relating to sample preparation
3.5 Terms relating to physical form
3.6 Others terms relating to plant biostimulants
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 Claims
3.1.1 General principles
3.1.1.1
applicant R&D activities
data derived from R&D activities performed by the applicant
Note 1 to entry: R&D can be related to the plant biostimulant product development, testing and validation,
irrespective of the environment in which the type of data has been generated (e.g. under controlled conditions,
protected crop or field conditions).
Note 2 to entry: If the applicant has performed the R&D activities by its own technical resources or if the
applicant has subcontracted the R&D activities, as long as the owner of the outcome data from the R&D activities
is and can be proven to be the applicant.
3.1.1.2
bioavailability
degree to which substances can be absorbed/adsorbed by a plant or microbe, which is made available
at a site of physiological activity and so is able to have a biological effect
3.1.1.3
claim
effect(s) of the product that could be asserted on the product label of a plant biostimulant and after the
conformity assessment procedure
3.1.1.4
crop
cultivated plant including all components of the plant (above ground parts and below ground parts),
mushrooms, microalgae and macroalgae
3.1.1.5
general principle
define the crops and quality criteria applicable to all plant biostimulants for carrying out the tests
necessary to justify the claim
3.1.1.6
plant
live plant and live parts of plants, including fresh fruit, vegetables and seeds
Note 1 to entry: It also includes microalgae, macroalgae and mushrooms.
3.1.1.7
plant biostimulant product
product stimulating plant nutrition processes independently of the product’s nutrient content with the
sole aim of improving the nutrient use efficiency, the tolerance to abiotic stress, the quality traits of the
plant or the plant rhizosphere or the availability of confined nutrient in soil or rhizosphere
3.1.1.8
protected crop
crop cultivation in greenhouses or plastic tunnels with or without specific control of climate conditions
according to the farming practice
EXAMPLE Cucumbers/tomatoes cultivation.
3.1.1.9
plant nutrient
chemical element used by the plant for growth and development, usually classified as primary
macronutrients, secondary macronutrients and micronutrients in the quantities required by the plant
Note 1 to entry: Carbon, hydrogen, and oxygen are also essential elements for plant growth.
Note 2 to entry: Primary macronutrients – nitrogen, phosphorus, potassium;
secondary macronutrients – calcium, magnesium, sodium, sulphur;
micronutrients – boron, cobalt, copper, iron, manganese, molybdenum, zinc.
3.1.1.10
trial series
combination of more than one trial result, all trials performed under the same trial protocol but in
different places and/or at different times
EXAMPLE Rate, crop, number of applications.
3.1.2
Nutrient Use Efficiency
NUE
measure of a plant’s ability to acquire and utilize nutrients from the environment for a desired outcome
based on (a) nutrient availability (b) uptake efficiency and/or (c) utilization efficiency
Note 1 to entry: Nutrient use efficiency is a complex trait: it depends on the ability to take up the nutrients from
the soil, medium, fertilizing products, but also on transport, storage, mobilization, usage by the plant.
3.1.2.1
chelated plant nutrient
complexed plant nutrient
composition based on an inorganic form of the plant nutrient and a chelating or complexing agent,
resulting in a product that enhances the nutrient availability to plants
EXAMPLE A composition of chelated or complexed plant nutrient is a salt or oxide.
3.1.2.2
labelling
improve nutrient(s) use efficiency (the nutrient in question must be precisely specified) according to
the type of the product biostimulant’s activities and the type of plant nutrients
3.1.2.3
nutrient assimilation
uptake of nutrients into cells and tissues and consequent building up into more complex substances
EXAMPLE Converting available nitrogen into biomass.
3.1.2.4
nutrient availability
measure of the capacity of a nutrient to be acquired by the plant, depending on its presence in the soil
solution or on soil colloids
3.1.2.5
nutrient uptake
acquisition of nutrients by the plant
3.1.2.6
plant development
complex process by which the size, composition and organization of a plant changes during its life,
encompassing seed germination, vegetative growth, formation of flowers, bloom, fruit set and
maturation (embryo development)
3.1.2.7
plant metabolism
various biochemical reactions occurring in a living plant cell in order to maintain life and growth
3.1.2.8
plant nutrition
supply and absorption of chemical compounds needed for plant growth and metabolism
3.1.2.9
plant nutrition process
mechanism by which nutrients are utilized or converted to cellular constituents and used for energetic
or metabolic purposes
3.1.2.10
quality
desired attributes of cultivated organisms in terms of human or animal nutrition, marketing, aesthetics,
composition, agronomical trait, or technical
3.1.2.11
substance
chemical element and its compounds in the natural state or obtained by any manufacturing process,
including any additives necessary to preserve its stability and any impurity deriving from the process
used, but excluding any solvent which can be separated without affecting the stability of the substance
or changing its composition
3.1.2.12
uptake efficiency
measure of the plant capacity to acquire nutrients from the environment
3.1.2.13
utilization efficiency
measure of the plant capacity to transform and valorize absorbed nutrients into more complex
substances
EXAMPLE Organic compounds, plant biomass.
3.1.3
tolerance to abiotic stress
ability to endure abiotic stress
3.1.3.1
abiotic stress
negative impact of non-living factors on the plant in a specific crop environment
Note 1 to entry: Crop tolerance to abiotic stress is addressed to one or more (multiple or combined) of the
following stress categories:
1) chemical stress;
2) light stress;
3) mechanical stress;
4) osmotic stress;
5) oxidative stress;
6) thermal stress;
7) water stress.
3.1.3.1.1
chemical stress
negative impact of chemicals (supra-optimal or sub-optimal chemical compounds or presence) on the
plant in a specific crop environment
EXAMPLE Salt stress, high solutes concentrations, mineral toxicity induced by heavy metals or excessive
application of mineral nutrients, adverse pH conditions, ozone stress, phytotoxic effects of xenobiotics.
3.1.3.1.2
light stress
negative impact of light intensity and/or
...