Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers

This part of EN 1060, in conjunction with prEN 1060-1:1995, specifies performance, efficiency and mechanical and electrical safety requirements, including test methods, for non-invasive mechanical sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure.

Nichtinvasive Blutdruckmeßgeräte - Teil 2: Ergänzende Anforderungen für mechanische Blutdruckmeßgeräte

Dieser Teil der prEN 1060 legt in Verbindung mit prEN 1060-1:1994 Anforderungen hinsichtlich der Gebrauchstauglichkeit, Meßsicherheit, mechanischen und elektrischen Sicherheit von nichtinvasiven mechanischen Blutdruckmeßgeräten und deren Zubehör fest, die zur nichtinvasiven Messung des arteriellen Blutdrucks mit Hilfe einer aufblasbaren Manschette verwendet werden und beinhaltet Prüfverfahren.

Tensiomètres non invasifs - Partie 2: Exigences complémentaires concernant les tensiomètres mécaniques

Cette partie du prEN 1060, avec le prEN 1060-1:1994, spécifie les caractéristiques de performances, d'efficacité et les exigences mécaniques et électriques de sécurité, ainsi que les méthodes d'essai des tensiomètres mécaniques non invasifs et de leurs accessoires qui, au moyen d'un brassard gonflable, sont utilisés pour la mesure non invasive de la pression artérielle.

Neinvazivni sfigmomanometri - 2. del: Dodatne zahteve za mehanske sfigmomanometre

General Information

Status
Withdrawn
Publication Date
12-Dec-1995
Withdrawal Date
17-Nov-2009
ICS
11.040.55 - Diagnostic equipment
Technical Committee
CEN/TC 205 - Non-active medical devices
Drafting Committee
CEN/TC 205/WG 10 - Non-invasive sphygmomanometers
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Nov-2009
Completion Date
18-Nov-2009
Directive
93/42/EEC - Medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN 1060-2:2000 - Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers

Relations

Merged Into
EN 1060-2:1995+A1:2009 - Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers
Effective Date
18-Jan-2023
Referred By
EN 1060-3:1997+A2:2009 - Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems
Effective Date
28-Jan-2026
Amended By
EN 1060-2:1995/FprA1 - Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers
Effective Date
22-Dec-2008
Corrected By
EN 1060-2:1995/AC:2002 - Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers
Effective Date
22-Dec-2008

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified
Visit Website

TÜV Rheinland

TÜV Rheinland is a leading international provider of technical services.

DAKKS Germany Verified
Visit Website

TÜV SÜD

TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.

DAKKS Germany Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 1060-2:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers". This standard covers: This part of EN 1060, in conjunction with prEN 1060-1:1995, specifies performance, efficiency and mechanical and electrical safety requirements, including test methods, for non-invasive mechanical sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure.

This part of EN 1060, in conjunction with prEN 1060-1:1995, specifies performance, efficiency and mechanical and electrical safety requirements, including test methods, for non-invasive mechanical sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure.

EN 1060-2:1995 is classified under the following ICS (International Classification for Standards) categories: 11.040.55 - Diagnostic equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 1060-2:1995 has the following relationships with other standards: It is inter standard links to EN 1060-2:1995+A1:2009, EN 1060-3:1997+A2:2009, EN 1060-2:1995/FprA1, EN 1060-2:1995/AC:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 1060-2:1995 is associated with the following European legislation: EU Directives/Regulations: 93/42/EEC; Standardization Mandates: M/023. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 1060-2:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2000
Neinvazivni sfigmomanometri - 2. del: Dodatne zahteve za mehanske
sfigmomanometre
Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical
sphygmomanometers
Nichtinvasive Blutdruckmeßgeräte - Teil 2: Ergänzende Anforderungen für mechanische
Blutdruckmeßgeräte
Tensiometres non invasifs -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...