EN 14067-2:2003
(Main)Railway applications - Aerodynamics - Part 2: Aerodynamics on open track
Railway applications - Aerodynamics - Part 2: Aerodynamics on open track
This European Standard describes physical phenomena of railway-specific aerodynamics and gives recommendations for the documentation of tests.
Bahnanwendungen - Aerodynamik - Teil 2: Aerodynamik auf offener Strecke
Diese Europäische Norm beschreibt physikalische Vorgänge der eisenbahnspezifischen Aerodynamik und gibt Empfehlungen für die Beschreibung von Prüfungen.
Applications ferroviaires - Aérodynamique - Partie 2: Aérodynamique à l'air libre
La présente Norme européenne décrit des phénomènes physiques de l'aérodynamique ferroviaire et donne des recommandations pour la documentation des essais.
Železniške naprave – Aerodinamika – 2. del: Aerodinamika na odprti progi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave – Aerodinamika – 2. del: Aerodinamika na odprti progiBahnanwendungen - Aerodynamik - Teil 2: Aerodynamik auf offener StreckeApplications ferroviaires - Aérodynamique - Partie 2: Aérodynamique a l'air libreRailway applications - Aerodynamics - Part 2: Aerodynamics on open track45.060.01Železniška vozila na splošnoRailway rolling stock in generalICS:Ta slovenski standard je istoveten z:EN 14067-2:2003SIST EN 14067-2:2004en01-marec-2004SIST EN 14067-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14067-2April 2003ICS 45.060.01English versionRailway applications - Aerodynamics - Part 2: Aerodynamics onopen trackApplications ferroviaires - Aérodynamique - Partie 2:Aérodynamique à l'air libreBahnanwendungen - Aerodynamik - Teil 2: Aerodynamikauf offener StreckeThis European Standard was approved by CEN on 2 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14067-2:2003 ESIST EN 14067-2:2004
1)in preparationSIST EN 14067-2:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.