Railway applications - Design for PRM use - General requirements - Part 2: Information

This European Standard describes the specific ‘Design for PRM use’ requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this standard:
—   The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.
—   This standard defines elements which are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this standard cover the infrastructure and the rolling stock applications.
—   This standard only refers to aspects of accessibility for PRM passengers it does not define non PRM related requirements and definitions.
—   This standard assumes that the infrastructure or rolling stock is in its defined operating condition.
—   Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The ‘General requirements’ standard is written in three parts:
—   Part 1 contains:
—   contrast;
—   This document is Part 2 and contains:
—   spoken information;
—   written information;
—   tactile information;
—   pictograms;
—   Part 3 contains:
—   lighting;
—   low reflective properties;
—   transparent obstacles;
—   slip resistance.

Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Allgemeine Anforderungen - Teil 2: Informationen

Applications ferroviaires - Conception destinée à l'usage par les PMR: Exigences générales - Partie 2: Informations

Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi - Splošne zahteve - 2. del: Informacije

General Information

Status
Not Published
Publication Date
04-Dec-2024
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
30-May-2024
Due Date
22-Feb-2023
Completion Date
30-May-2024

Relations

Buy Standard

Draft
prEN 16584-2:2022 - BARVE
English language
90 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2022
Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi -
Splošne zahteve - 2. del: Informacije
Railway applications - Design for PRM use - General requirements - Part 2: Information
Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Allgemeine
Anforderungen - Teil 2: Informationen
Applications ferroviaires - Conception destinée à l'usage par les PMR: Exigences
générales - Partie 2: Informations
Ta slovenski standard je istoveten z: prEN 16584-2
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
45.020 Železniška tehnika na Railway engineering in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 16584-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2022
ICS 45.020; 11.180.01 Will supersede EN 16584-2:2017
English Version
Railway applications - Design for PRM use - General
requirements - Part 2: Information
Applications ferroviaires - Conception destinée à Bahnanwendungen - Gestaltung für die Nutzung durch
l'usage par les PMR: Exigences générales - Partie 2: PRM - Allgemeine Anforderungen - Teil 2:
Informations Informationen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16584-2:2022 E
worldwide for CEN national Members.

prEN 16584-2:2022 (E)
Contents Page
European foreword . 5
Introduction . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 10
4 Symbols and abbreviations . 13
5 Requirements and assessment . 14
5.1 General. 14
5.2 Infrastructure . 14
5.2.1 Parking facilities for persons with disabilities and persons with reduced mobility . 14
5.2.2 Obstacle-free routes . 14
5.2.3 Doors and entrances . 17
5.2.4 Ticketing, information desks and customer assistance points . 17
5.2.5 Visual information: signposting, pictograms, printed or dynamic information . 19
5.2.6 Spoken information . 21
5.2.7 Platform danger area and edges of platforms . 21
5.2.8 End of platforms . 21
5.2.9 Platform – wheelchair boarding aid operational zone. 22
5.2.10 Level track crossings . 22
5.2.11 Displays . 22
5.3 Rolling stock . 23
5.3.1 Seats - Priority seats . 23
5.3.2 Wheelchair spaces . 24
5.3.3 Doors . 25
5.3.4 Toilets . 28
5.3.5 Customer information . 30
5.3.6 Internal and external displays . 35
5.3.7 Call for aid device . 36
5.3.8 Wheelchair accessible sleeping accommodation . 37
6 Methodologies . 38
6.1 Internal display scrolling speed and character display duration . 38
6.1.1 General. 38
6.1.2 Methodology . 38
Annex A (normative) PRM Signage . 39
A.1 Infrastructure signs . 39
A.2 Rolling stock signs . 39
A.3 International wheelchair sign . 40
A.4 Induction loop (for hearing aid systems) sign . 40
A.5 Call for aid . 41
A.6 Priority seating signs . 41
Annex B (normative) Tactile characteristics . 42
B.1 Tactile pictograms and characters . 42
prEN 16584-2:2022 (E)
B.2 Tactile controls . 43
B.3 Tactile feedback or tactile indication . 44
Annex C (normative) Eye point dimensions . 45
Annex D (normative) Visual acuity for displays . 46
Annex E (normative) Specific braille Requirements . 54
Annex F (normative) Characteristics of 'easily readable' . 55
Annex G (normative) Characteristics of 'easily readable' . 59
G.1 General . 59
G.2 Door opening signal - Characteristics . 59
G.3 Door closing signal - Characteristics . 59
G.4 Door finding signal . 60
G.4.1 Characteristics . 60
G.4.2 Definition - Characteristics . 60
G.4.3 Single Tone Signal . 61
G.4.4 Dual Tone Signal . 61
Annex H (informative) Other specific braille requirements . 63
H.1 General requirements for braille. 63
H.2 Checking readability of braille . 63
H.3 Recommendations for braille carrier material . 64
H.4 The braille cell . 64
H.5 Marburg medium spacing convention for braille . 64
H.6 Braille character sets . 65
Annex I (informative) Pictograms examples and ‘Good practice’ . 66
Annex J (informative) Examples of toilet control device ‘Good practice’ . 71
J.1 Orientation of equipment and associated labels . 71
J.2 Function identification . 71
J.2.1 General . 71
J.2.2 Visual identification of the function should be pictograms or simple words . 71
J.2.3 Tactile identification of the function . 71
J.3 “Vacant / occupied / out of service” indicator . 74
J.3.1 General . 74
J.3.2 Visual recognition: . 74
J.3.3 Acoustic recognition . 74
Annex K (informative) Electronic display assessment guidance . 76
K.1 General . 76
K.2 Worked through assessment example . 77
prEN 16584-2:2022 (E)
Annex L (informative) Examples of sans serif fonts .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.