EN 1835:1999
(Main)Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking
Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking
This European Standard specifies the minimum requirements for light duty construction compressed air line breathing apparatus incorporating a helmet or a hood which is intended for use in gaseous, particulate or combined contaminated atmospheres. Such equipment is intended for use in work situations where the risk of damage to the compressed air supply tube is low. Escape and diving apparatus, and apparatus used in abrasive blasting operations are not included. Laboratory and practical performance tests are included for the assessment of compliance with the requirements.
Atemschutzgeräte - Druckluft-Schlauchgeräte für leichte Einsätze mit Helm oder Haube - Anforderungen, Prüfung, Kennzeichnung
Diese Europäische Norm legt die Mindestanforderungen an Druckluft- Schlauchgeräte für leichte Einsätze mit Helm oder Haube fest, die fu(r den Einsatz in Atmosphären vorgesehen sind, die durch Gase, Partikeln oder beides verunreinigt sind. Derartige Ausrüstung ist für den Einsatz bei Arbeits- bedingungen vorgesehen, bei denen die Gefahr einer Bescha(digung des Druckluft- Zufu(hrungsschlauches gering ist. Flucht- und Tauchgera(te sowie Gera(te, die bei Strahlarbeiten eingesetzt werden, sind nicht Gegenstand dieser Norm.
Appareils de protection respiratoire - Appareils de protection respiratoire isolants à adduction d'air comprimé de construction légère, avec casque ou cagoule - Exigences, essais, marquage
La présente norme européenne spécifie les exigences minimales des appareils respiratoires isolants à adduction d'air comprimé de construction légère, avec casque ou cagoule qui sont destinés à une utilisation en atmosphère contaminée par des gaz, des particules ou les deux. De tels équipements sont destinés à être utilisés dans des situations de travail o$ le risque de dététioration du tube d'alimentation en air comprimé est faible. Les appareils destinés ` l'évacuation, ` la plongée et ceux utilisés dans les opérations de projection d'abrasifs ne sont pas couverts.
Oprema za varovanje dihal - Dihalni aparat na stisnjen zrak za lažja dela s čelado ali kapuco - Zahteve, preskušanje, označevanje
General Information
- Status
- Withdrawn
- Publication Date
- 07-Dec-1999
- Withdrawal Date
- 19-Apr-2005
- Technical Committee
- CEN/TC 79 - Respiratory protective devices
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 20-Apr-2005
- Completion Date
- 20-Apr-2005
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1835:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking". This standard covers: This European Standard specifies the minimum requirements for light duty construction compressed air line breathing apparatus incorporating a helmet or a hood which is intended for use in gaseous, particulate or combined contaminated atmospheres. Such equipment is intended for use in work situations where the risk of damage to the compressed air supply tube is low. Escape and diving apparatus, and apparatus used in abrasive blasting operations are not included. Laboratory and practical performance tests are included for the assessment of compliance with the requirements.
This European Standard specifies the minimum requirements for light duty construction compressed air line breathing apparatus incorporating a helmet or a hood which is intended for use in gaseous, particulate or combined contaminated atmospheres. Such equipment is intended for use in work situations where the risk of damage to the compressed air supply tube is low. Escape and diving apparatus, and apparatus used in abrasive blasting operations are not included. Laboratory and practical performance tests are included for the assessment of compliance with the requirements.
EN 1835:1999 is classified under the following ICS (International Classification for Standards) categories: 13.340.30 - Respiratory protective devices. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1835:1999 has the following relationships with other standards: It is inter standard links to EN 14594:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1835:1999 is associated with the following European legislation: EU Directives/Regulations: 89/686/EEC, 93/95/EEC, 96/58/EC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1835:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Atemschutzgeräte - Druckluft-Schlauchgeräte für leichte Einsätze mit Helm oder Haube - Anforderungen, Prüfung, KennzeichnungAppareils de protection respiratoire - Appareils de protection respiratoire isolants a adduction d'air comprimé de construction légere, avec casque ou cagoule - Exigences, essais, marquageRespiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking13.340.30Varovalne dihalne napraveRespiratory protective devices13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 1835:1999SIST EN 1835:2000en01-september-2000SIST EN 1835:2000SLOVENSKI
STANDARD
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...