EN ISO 8394-1:2010

SLOVENSKI STANDARD
01-november-2011
1DGRPHãþD
SIST EN 28394:1996
Gradnja objektov - Sredstva za stikovanje - 1. del: Ugotavljanje iztisljivosti
tesnilnih mas (ISO 8394-1:2010)
Building construction - Jointing products - Part 1: Determination of extrudability of
sealants (ISO 8394-1:2010)
Hochbau - Fugendichtstoffe - Teil 1: Bestimmung der Verarbeitbarkeit von Dichtstoffen
(ISO 8394-1:2010)
Construction immobilière - Produits pour joints - Partie 1: Détermination de l'extrudabilité
des mastics (ISO 8394-1:2010)
Ta slovenski standard je istoveten z: EN ISO 8394-1:2010
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8394-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 91.100.50 Supersedes EN 28394:1990
English Version
Building construction - Jointing products - Part 1: Determination
of extrudability of sealants (ISO 8394-1:2010)
Construction immobilière - Produits pour joints - Partie 1: Hochbau - Fugendichtstoffe - Teil 1: Bestimmung der
Détermination de l'extrudabilité des mastics (ISO 8394- Verarbeitsbarkeit von Dichtstoffen (ISO 8394-1:2010)
1:2010)
This European Standard was approved by CEN on 30 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8394-1:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 8394-1:2010 has been prepared by Technical Committee ISO/TC 59 “Buildings and civil
engineering works” of the International Organization for Standardization (ISO) and has been taken over as
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 28394:1990.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8394-1:2010 has been approved by CEN as a EN ISO 8394-1:2010 without any modification.

INTERNATIONAL ISO
STANDARD 8394-1
First edition
2010-10-01
Building construction — Jointing
products —
Part 1:
Determination of extrudability of sealants
Construction immobilière — Produits pour joints —
Partie 1: Détermination de l'extrudabilité des mastics

Reference number
ISO 8394-1:2010(E)
©
ISO 2010
ISO 8394-1:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

ISO 8394-1:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted
...