Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for theconstruction of pipelines: - to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar; - to be installed below or above ground. Note 1: A combustible gas is a gas or any fuel that is in a gaseous state at a temperature of 15°C at a pressure of 1 bar.

Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für Gasleitungen - Anforderungen und Prüfverfahren

Diese europäische Norm legt die Anforderungen und die diesbezüglichen Prüfverfahren fest, die auf duktile Gußrohre, Formstücke, Zubehörteile und ihre Verbindungen anwendbar sind zur Errichtung von Rohrleitungen: - zum Transport von Luft oder brennbaren Gasen (z.B. Erdgas oder Stadtgas) bis zu einem Druck von 16 bar; -oberirdisch oder erdverlegt. Anmerkung 1: Ein brennbares Gas ist ein Gas oder ein beliebiger Brennstoff, der bei einer Temperatur von 15°C und einen Druck von 1 bar gasförmig ist.

Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour canalisations de gaz - Prescriptions et méthodes d'essai

La présente norme européenne prescrit les exigences et les méthodes d'essai associées applicables aux tuyaux, raccords et accessoires en fonte ductile et à leurs assemblages, destinés à la construction de canalisations: - pour transporter de l'air ou des gaz combustibles (p.ex.: gaz naturel ou gaz de ville) à des pressions pouvant atteindre 16 bars; - installées dans le sol ou enaérien. Note 1: Un gaz combustible est un gaz ou tout combustible qui est à l'état gazeux à la température de 15°C et à la pression de 1 bar.

Cevi, fitingi in dodatki iz duktilne litine za plinovode - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
22-Aug-1995
Withdrawal Date
17-Mar-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Mar-2009
Completion Date
18-Mar-2009

Relations

Effective Date
23-Mar-2009
Effective Date
08-Jun-2022

Get Certified

Connect with accredited certification bodies for this standard

Institut za varilstvo d.o.o. (Welding Institute)

Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au

SA Slovenia Verified

Sponsored listings

Frequently Asked Questions

EN 969:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods". This standard covers: This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for theconstruction of pipelines: - to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar; - to be installed below or above ground. Note 1: A combustible gas is a gas or any fuel that is in a gaseous state at a temperature of 15°C at a pressure of 1 bar.

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for theconstruction of pipelines: - to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar; - to be installed below or above ground. Note 1: A combustible gas is a gas or any fuel that is in a gaseous state at a temperature of 15°C at a pressure of 1 bar.

EN 969:1995 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 23.040.40 - Metal fittings. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 969:1995 has the following relationships with other standards: It is inter standard links to EN 969:2009, EN 969:1995/A1:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 969:1995 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 969:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-1998
Cevi, fitingi in dodatki iz duktilne litine za plinovode - Zahteve in postopki
preskušanja
Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements
and test methods
Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für
Gasleitungen - Anforderungen und Prüfverfahren
Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour
canalisations de gaz - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: EN 969:1995
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 969:199
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...