ASTM D1719-11(2019)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D1719 −11 (Reapproved 2019)
Standard Specification for
1,2
Isobutyl Alcohol
This standard is issued under the fixed designation D1719; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope D1209 Test Method for Color of Clear Liquids (Platinum-
Cobalt Scale)
1.1 This specification covers isobutyl alcohol for use in
D1353 Test Method for Nonvolatile Matter in Volatile Sol-
paint, varnish, lacquer, and related products.
vents for Use in Paint, Varnish, Lacquer, and Related
1.2 The values stated in SI units are to be regarded as
Products
standard. No other units of measurement are included in this
D1364 Test Method for Water in Volatile Solvents (Karl
standard.
Fischer Reagent Titration Method)
D1476 Test Method for Heptane Miscibility of Lacquer
1.3 The following applies to all specified limits in this
standard: for purposes of determining conformance with this Solvents
D1613 Test Method for Acidity in Volatile Solvents and
standard, an observed value or a calculated value shall be
rounded off “to the nearest unit” in the last right-hand digit Chemical Intermediates Used in Paint, Varnish, Lacquer,
and Related Products
used in expressing the specification limit, in accordance with
the rounding-off method of Practice E29. D4052 Test Method for Density, Relative Density, and API
Gravity of Liquids by Digital Density Meter
1.4 For specific hazard information and guidance, see the
D5386 Test Method for Color of Liquids Using Tristimulus
supplier’s Material Safety Data Sheets for materials listed in
Colorimetry
this specification.
E29 Practice for Using Significant Digits in Test Data to
1.5 This international standard was developed in accor-
Determine Conformance with Specifications
dance with internationally recognized principles on standard-
E300 Practice for Sampling Industrial Chemicals
ization established in the Decision on Principles for the
2.2 U.S. Federal Specification:
Development of International Standards, Guides and Recom-
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
mendations issued by the World Trade Organization Technical
of
Barriers to Trade (TBT) Committee.
3. Properties
2. Referenced Documents
3.1 Isobutyl alcohol shall conform to the following require-
2.1 ASTM Standards:
ments:
D268 Guide for Sampling and Testing Volatile Solvents and
Apparent specific gravity:
Chemical Intermediates for Use in Paint and Related
20/20 °C 0.802 to 0.804
or
Coatings and Material
25/25 °C 0.794 to 0.801
D1078 Test Method for Distillation Range of Volatile Or-
A
Color, Pt-Co Scale, max 10
B
ganic Liquids
Distillation range
Nonvolatile matter, max, g/100 mL 0.005
C
Water, max, weight % 0.2
D
Acidity (free acid as acetic), max, 0.003
weight %
This specification is under the jurisdiction of ASTM Committee D01 on Paint
and Related Coatings, Materials, andApplications and is the direct responsibility of
A
Instrumental Pt-Co color determined by Test Method D5386 has been shown to
Subcommittee D01.35 on Solvents, Plasticizers, and Chemical Intermediates.
have no statistically significant difference from Pt-Co color determined by Test
Current edition approved April 1, 2019. Published Apri
...