Standard Guide for Sensory Evaluation of Beverages Containing Alcohol

SIGNIFICANCE AND USE
2.1 The procedures recommended in this guide can be used for the sensory evaluation of alcoholic beverages.  
2.2 This guide provides practical suggestions to maximize panelist safety and to minimize the risks and liabilities of the person or corporation responsible for administering the sensory evaluation of alcoholic beverages.  
2.3 This guide also provides practical suggestions when dealing with various government agencies that are involved in distributing alcoholic beverage test products.  
2.4 This guide uses a research example (Appendix X1) to frame the safety and regulatory considerations when conducting sensory evaluations of alcoholic beverage products.
Note 1: See also Appendix X1 and STP 913 (3).
SCOPE
1.1 This guide provides guidelines specific to the sensory and consumer evaluation of alcoholic beverages, including beer, wine, coolers, cocktails, ready to drinks, liqueurs, hard ciders, and distilled spirits.  
1.2 This guide addresses safety, legal, panel selection, sample preparation, test procedures, and code of conduct specific to alcoholic beverages.  
1.3 This guide does not recommend a specific test method.  
1.4 The guide does not purport to address all of the nuances of testing throughout the world. Different countries have different guidelines while some countries do not have their own guidelines. The definition of a standard drink (or unit of alcohol) also differs from country to country. This guide is generally focused on testing within the US (and to an extent Canada); and even within these regions, laws could change over time. This guide covers what is generally in place currently in these areas and is suggested for countries that generally have no guidelines of their own. It is the responsibility of the user to be aware of their local laws and regulations, corporate policies and procedures, and apply them as needed. Some useful resources are also cited in this guide (Refs (1 and 2)2).  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Historical
Publication Date
31-Aug-2017
Current Stage
Ref Project

Relations

Buy Standard

Guide
ASTM E1879-17 - Standard Guide for Sensory Evaluation of Beverages Containing Alcohol
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview
Guide
REDLINE ASTM E1879-17 - Standard Guide for Sensory Evaluation of Beverages Containing Alcohol
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E1879 − 17
Standard Guide for
1
Sensory Evaluation of Beverages Containing Alcohol
This standard is issued under the fixed designation E1879; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 2. Significance and Use
1.1 This guide provides guidelines specific to the sensory 2.1 The procedures recommended in this guide can be used
and consumer evaluation of alcoholic beverages, including for the sensory evaluation of alcoholic beverages.
beer, wine, coolers, cocktails, ready to drinks, liqueurs, hard
2.2 This guide provides practical suggestions to maximize
ciders, and distilled spirits.
panelist safety and to minimize the risks and liabilities of the
1.2 This guide addresses safety, legal, panel selection,
personorcorporationresponsibleforadministeringthesensory
sample preparation, test procedures, and code of conduct
evaluation of alcoholic beverages.
specific to alcoholic beverages.
2.3 This guide also provides practical suggestions when
1.3 This guide does not recommend a specific test method.
dealing with various government agencies that are involved in
distributing alcoholic beverage test products.
1.4 The guide does not purport to address all of the nuances
of testing throughout the world. Different countries have
2.4 This guide uses a research example (Appendix X1)to
differentguidelineswhilesomecountriesdonothavetheirown
frame the safety and regulatory considerations when conduct-
guidelines. The definition of a standard drink (or unit of
ing sensory evaluations of alcoholic beverage products.
alcohol) also differs from country to country. This guide is
NOTE 1—See also Appendix X1 and STP 913 (3).
generally focused on testing within the US (and to an extent
Canada); and even within these regions, laws could change
3. Safety
over time. This guide covers what is generally in place
currently in these areas and is suggested for countries that 3.1 Medical Condition—Potential panelists must be in good
medical condition with no serious health problems. Inform
generally have no guidelines of their own. It is the responsi-
bilityoftheusertobeawareoftheirlocallawsandregulations, them that they should not participate on panels if they are
taking prescription or over-the-counter medications, which are
corporate policies and procedures, and apply them as needed.
Some useful resources are also cited in this guide (Refs (1 and contraindicated when combined with alcohol. It is recom-
2
2) ). mended that women who are pregnant, may be pregnant, or
nursing should not participate. Recruiting should be conducted
1.5 This standard does not purport to address all of the
in such a way to ensure that those not meeting these medical
safety concerns, if any, associated with its use. It is the
requirements are excluded from participation.
responsibility of the user of this standard to establish appro-
priate safety, health, and environmental practices and deter-
3.2 Sample Size—Limit the sample volume for evaluation to
mine the applicability of regulatory limitations prior to use.
an amount which will ensure the respondent will not have a
1.6 This international standard was developed in accor-
blood alcohol level greater than a legal limit (see 8.3.1.3).
dance with internationally recognized principles on standard-
3.3 Home-Use Testing:
ization established in the Decision on Principles for the
3.3.1 Home-Use Tests (HUTs) with alcoholic beverages are
Development of International Standards, Guides and Recom-
often used to determine product acceptance and how products
mendations issued by the World Trade Organization Technical
are typically used. Transportation and storage of high proof
Barriers to Trade (TBT) Committee.
spirits are very important. In addition to an informed consent
form (see 5.2.1), it is recommended that the following state-
ments accompany products used in home-use testing:
1
This guide is under the jurisdiction of ASTM Committee E18 on Sensory
3.3.1.1 The sponsor of this study is a well-known major
Evaluation and is the direct responsibility of Subcommittee E18.06 on Food and
manufacturer who considers the health and safety of research
Beverage Evaluation.
Current edition approved Sept. 1, 2017. Published October 2017. Originally
participants and the public to be of the utmost importance.
approved in 1997. Last previous edition approved in 2010 as E1879 – 00 (2010).
3.3.1.2 Some suggested guidelines that may be given to
DOI: 10.1520/E1879-17.
2
participants are listed as follows. Compliance with the guide-
The boldface numbers in parentheses refer to the list of references at the end o
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E1879 − 00 (Reapproved 2010) E1879 − 17
Standard Guide for
1
Sensory Evaluation of Beverages Containing Alcohol
This standard is issued under the fixed designation E1879; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This guide provides guidelines specific to the sensory and consumer evaluation of beverages containing alcohol, alcoholic
beverages, including beer, wine, coolers, cocktails, liqueurs, ready to drinks, liqueurs, hard ciders, and distilled spirits.
1.2 This guide addresses safety, legal, panel selection, sample preparation, and test procedures specific to beverages containing
alcohol. test procedures, and code of conduct specific to alcoholic beverages.
1.3 This guide does not recommend a specific test method.
1.4 The guide does not purport to address all of the nuances of testing throughout the world. Different countries have different
guidelines while some countries do not have their own guidelines. The definition of a standard drink (or unit of alcohol) also differs
from country to country. This guide is generally focused on testing within the US (and to an extent Canada); and even within these
regions, laws could change over time. This guide covers what is generally in place currently in these areas and is suggested for
countries that generally have no guidelines of their own. It is the responsibility of the user to be aware of their local laws and
regulations, corporate policies and procedures, and apply them as needed. Some useful resources are also cited in this guide (Refs
2
(1 and 2) ).
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety safety, health, and healthenvironmental practices and determine the
applicability of regulatory limitations prior to use.
1.4 This guide does not recommend a specific test method.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Significance and Use
2.1 The procedures recommended in this guide can be used for the sensory evaluation of beverages containing alcohol.alcoholic
beverages.
2.2 This guide provides practical suggestions to maximize panelist safety and to minimize the risks and liabilities of the person
or corporation responsible for administering the sensory evaluation of beverages containing alcohol.alcoholic beverages.
2.3 This guide also provides practical suggestions when dealing with various government agencies that are involved in
distributing alcoholic beverage alcohol test products.
2.4 This guide uses a research example (Appendix X1) to frame the safety and regulatory considerations when conducting
sensory evaluations of alcoholic beverage products.
NOTE 1—See also Appendix X1 and STP 913 (3).
3. Safety
2
NOTE 1—See also Fig. 1 and STP 913 (1).
3.1 Medical Condition—Potential panelists must be in good medical condition with no serious health problems. Inform them
that they should not participate on panels if they are taking prescription or over-the-counter medications, which are contraindicated
1
This guide is under the jurisdiction of ASTM Committee E18 on Sensory Evaluation and is the direct responsibility of Subcommittee E18.06 on Food and Beverage
Evaluation.
Current edition approved Nov. 1, 2010Sept. 1, 2017. Published December 2010October 2017. Originally approved in 1997. Last previous edition approved in 20042010
as E1879 – 00 (2010). (Reapproved 2004). DOI: 10.1520/E1879-00R10.10.1520/E1879-17.
2
The boldface numbers in parentheses refer to the list of references at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E1879 − 17
when combined with alcohol. It is recommended that women who are pregnant, may be pregnant, or nursing should not participate.
Recruiting should be conducted in such a way to ensure that those not meeting these medical requirements are exclude
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.