ASTM D4360-11(2019)
(Specification)Standard Specification for Methyl n-Amyl Ketone
Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone
ABSTRACT
This certification of coating conformance form provides procurement information concerning products being furnished in accordance with a specific coating specification and additional requirements contained in the purchase order. The certification form is divided into four headings: General Type and Description(I), Buyer Information(II), Seller Information (III), and Certification (IV). The first heading consists of the following information: generic type, manufacturer's designation, specification number, formula number, component number, component identification, and color. The second heading consists purchase order number, release number, part number, item number, and stock number. The third heading consists of seller's representative, batch number, lot number, date of manufacture, and date of certification expiration. The last heading is a paragraph describing the certification.
SCOPE
1.1 This specification covers methyl n-amyl ketone (98 % grade) for use in paint, varnish, lacquer, and related products.
1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.
1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D4360 −11 (Reapproved 2019)
Standard Specification for
Methyl n-Amyl Ketone
This standard is issued under the fixed designation D4360; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D3893 Test Method for Purity of Methyl Amyl Ketone and
Methyl Isoamyl Ketone by Gas Chromatography
1.1 This specification covers methyl n-amyl ketone (98 %
D4052 Test Method for Density, Relative Density, and API
grade) for use in paint, varnish, lacquer, and related products.
Gravity of Liquids by Digital Density Meter
1.2 For specific hazard information and guidance, see the
D5386 Test Method for Color of Liquids Using Tristimulus
supplier’sMaterialSafetyDataSheetformaterialslistedinthis
Colorimetry
specification.
E29 Practice for Using Significant Digits in Test Data to
Determine Conformance with Specifications
1.3 The following applies to all specified limits in this
standard: for purposes of determining conformance with this E300 Practice for Sampling Industrial Chemicals
standard, an observed value or a calculated value shall be 2.2 Federal Specification:
rounded off “to the nearest unit” in the last right-hand digit PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
of
used in expressing the specification limit, in accordance with
the rounding-off method of Practice E29.
3. Properties
1.4 This international standard was developed in accor-
3.1 Methyl n-amyl ketone shall conform to the following
dance with internationally recognized principles on standard-
requirements:
ization established in the Decision on Principles for the
Development of International Standards, Guides and Recom- Apparent specific gravity
20/20 °C 0.815–0.818
mendations issued by the World Trade Organization Technical
or or
Barriers to Trade (TBT) Committee.
25/25 °C 0.812–0.815
Color, Pt-Co scale, max (Note 1) 10
Distillation, 760 mm Hg, °C
2. Referenced Documents
Initial boiling point, min 147
Dry point, max 153.5
2.1 ASTM Standards:
Water, max, weight % 0.1
D268 Guide for Sampling and Testing Volatile Solvents and
Acidity, as acetic acid, max, weight % 0.02
Chemical Intermediates for Use in Paint and Related
Purity, min, weight % 98
Coatings and Material
NOTE 1—Instrumental Pt-Co color determined by Test Method D5386
D1078 Test Method for Distillation Range of Volatile Or-
has been shown to have no statistically significant difference from Pt-Co
ganic Liquids
color determined by Test Method D1209. However, it is not known
D1209 Test Method for Color of Clear Liquids (Platinum- whether methyl n-amyl ketone was part of the sample set included in the
interlaboratory study.
Cobalt Scale)
D1364 Test Method for Water in Volatile Solvents (Karl
4. Sampling
Fischer Reagent Titration Method)
4.1 The material shall be sampled in accordance with
D1613 Test Method for Acidity in Volatile Solvents and
Practice E300.
Chemical Intermediates Used in Paint, Varnish, Lacquer,
and Related Products
5. Test Methods
5.1 The
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.