M/124_AM1 - Road Construction Products
First amendment to mandate M/124 addressed to CEN concerning the execution of standardisation work for harmonised standards on road construction products
General Information
Frequently Asked Questions
A European Standardization Mandate is a formal request from the European Commission to the European Standardization Organizations (CEN, CENELEC, and ETSI) to develop European standards (ENs) in support of EU legislation and policies. Mandates are issued under Regulation (EU) No 1025/2012 and help ensure that products and services meet the essential requirements set out in EU directives and regulations.
M/124_AM1 is a European Standardization Mandate titled "First amendment to mandate M/124 addressed to CEN concerning the execution of standardisation work for harmonised standards on road construction products". First amendment to mandate M/124 addressed to CEN concerning the execution of standardisation work for harmonised standards on road construction products There are 2 standards developed under this mandate.
Standards developed in response to a mandate and cited in the Official Journal of the European Union become "harmonized standards". Products manufactured in compliance with harmonized standards benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation, facilitating CE marking and market access across the European Economic Area.
This European Standard specifies requirements for unbound mixtures used for construction and maintenance of roads, airfields and other trafficked areas.
This European Standard applies to unbound mixtures of natural, manufactured and recycled aggregates with an upper sieve size (D) from 5,6 mm to 90 mm and lower sieve size (d) = 0 at the point of delivery.
NOTE 1 Mixtures with an upper sieve size (D) greater than 90 mm are not covered by this European Standard but may be specified in the place of use.
NOTE 2 Water content of the mixture and the density of the installed layer are not specified mixture requirements. Both parameters are related to the control of the construction of the layer and are outside the scope of this European Standard.
The aggregate requirements are defined with appropriate cross-reference to EN 13242.
Use of aggregates as soil is not covered by this standard.
- Standard28 pagesEnglish languagee-Library read for1 day
This European Standard specifies requirements for unbound mixtures used for construction and maintenance of roads, airfields and other trafficked areas.
This European Standard applies to unbound mixtures of natural, manufactured and recycled aggregates with an upper sieve size (D) from 5,6 mm to 90 mm and lower sieve size (d) = 0 at the point of delivery.
NOTE 1 Mixtures with an upper sieve size (D) greater than 90 mm are not covered by this European Standard but may be specified in the place of use.
NOTE 2 Water content of the mixture and the density of the installed layer are not specified mixture requirements. Both parameters are related to the control of the construction of the layer and are outside the scope of this European Standard.
The aggregate requirements are defined with appropriate cross-reference to EN 13242.
Use of aggregates as soil is not covered by this standard.
- Standard28 pagesEnglish languagee-Library read for1 day