71.080.90 - Phenols

ICS 71.080.90 Details

Phenols

Phenole

Phenols

Fenoli

General Information

Parent

71.080 - Organic chemicals

Frequently Asked Questions

What is ICS 71.080.90?

ICS 71.080.90 is a classification code in the International Classification for Standards (ICS) system. It covers "Phenols". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.

How many standards are in ICS 71.080.90 - Phenols?

There are 49 standards classified under ICS 71.080.90 (Phenols). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.

What is the International Classification for Standards (ICS)?

The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.

Search Term

Standardization Organization

Technical Committee

Technical Committee Code

Directive

Mandate

Project Code

Project Reference

Project Title

Project Scope

	Jan 2026
28	29	30	31	1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31
1	2	3	4	5	6	7

	Feb 2026
25	26	27	28	29	30	31
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
1	2	3	4	5	6	7

Publication Date

	Jan 2026
28	29	30	31	1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31
1	2	3	4	5	6	7

	Feb 2026
25	26	27	28	29	30	31
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
1	2	3	4	5	6	7

Withdrawal Date

	Jan 2026
28	29	30	31	1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31
1	2	3	4	5	6	7

	Feb 2026
25	26	27	28	29	30	31
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
1	2	3	4	5	6	7

Public Enquiry End Date

Page Size:

ASTM

ASTM D4789-20e1(Test Method)

Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol)

SIGNIFICANCE AND USE
4.1 Color is caused by impurities in the bisphenol A. The acceptable amount of color depends on the end-use of the bisphenol A.
4.2 This test method can be used for internal quality control. This method provides the information required to set specifications.
SCOPE
1.1 This test method covers the procedure for determination of the Platinum-Cobalt Color of bisphenol A (4,4′-Isopropylidenediphenol) dissolved in methanol.
1.2 This test method has been found applicable for the determination of solution color of bisphenol A to 20 Pt–Co color units.
1.3 The following applies for the purposes of determining the conformance of the test results using this test method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
4 pages
English language
sale 15% off

30-Sep-2020
71.080.90
D16

ASTM

ASTM D4493-20(Test Method)

Standard Test Method for Solidification Point of Bisphenol A(4,4′-Isopropylidenediphenol)

SIGNIFICANCE AND USE
5.1 The solidification point of bisphenol A is a direct indication of its purity, although it gives no information as to the nature of any impurities present.
5.2 High purity bisphenol A has a solidification point of approximately 157°C.
5.3 This test method can be used for internal quality control or for setting specifications.
SCOPE
1.1 This test method describes the procedure for determination of the solidification point of bisphenol A (4,4′-isopropylidene diphenol).
1.2 The test method has been found applicable for determination of the solidification point between 150 and 157°C.
1.3 In determining conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 Warning—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
4 pages
English language
sale 15% off
Standard
4 pages
English language
sale 15% off

31-May-2020
71.080.90
D16

ASTM

ASTM D2439-20(Specification)

Standard Specification for Refined Phenol

ABSTRACT
This specification covers refined phenol. The refined phenol shall conform to the required water content, solidification point, appearance and molten color when sampled and tested.
SCOPE
1.1 This specification covers refined phenol.
1.2 The following applies to all specified limits in this specification: for purposes of determining conformance with this specification, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 Consult current OSHA regulations and supplier’s Safety Data Sheets, and local regulations for all materials listed in this specification.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Technical specification
2 pages
English language
sale 15% off
Technical specification
2 pages
English language
sale 15% off

31-Mar-2020
71.080.90
D16

ASTM

ASTM D4297-15(2020)(Practice)

Standard Practice for Sampling and Handling Bisphenol A(4,4′ -Isopropylidinediphenol)

SIGNIFICANCE AND USE
3.1 This practice is issued to provide information useful in establishing sampling and handling procedures. It is expected that this information will only be utilized in conjunction with an existing health and safety program and consultation with an appropriate SDS. The information provided herein cannot be used as a substitute for expert safety and medical advice as provided in an appropriate SDS, but rather as a supplement to such advice.
SCOPE
1.1 This practice covers procedures for safely sampling and handling 4,4′-isopropylidinediphenol, commercially known as bisphenol A (BPA), in various solid forms, and as a liquid at elevated temperatures in a manner which represents and preserves product quality.
1.2 Any person sampling or handling this product should have consulted a safety Data Sheet (SDS) for specific first aid instructions and information on the proper equipment to have available for use in the event of personal contact or exposure.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 3, 4, 5, 6, 7 and 8 and an appropriate SDS.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
3 pages
English language
sale 15% off

31-Dec-2019
71.080.90
D16

ASTM

ASTM D1631-10(2018)e1(Test Method)

Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method

SIGNIFICANCE AND USE
5.1 This test method is particularly useful for determining small amounts of water in hygroscopic materials. This test method is suitable for setting specifications on materials referenced in the scope. It may also be used as an internal quality control tool and in development or research work.
SCOPE
1.1 This test method covers the determination of water in phenol and related materials such as cresols, xylenols, naphthalene, pyridine, and quinoline.
1.2 This test method has been found applicable to a variety of materials varying in water content from 100 mg/kg to solutions containing a relatively high percent of water.
1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
4 pages
English language
sale 15% off

14-Feb-2018
71.080.90
D16

ASTM

ASTM D1721-97(2007)(Test Method)

Standard Test Method for Permanganate Time of Tricresyl Phosphate (Withdrawn 2012)

SIGNIFICANCE AND USE
Impurities such as phenols, if present in tricresyl phosphate, will react with potassium permanganate, reducing it to manganese dioxide. In the permanganate test, the color of the test solution is observed at the end of a 30-min period, and if the pink color is still present, the sample is considered substantially free of oxidizable impurities.
The results of this measurement can be used for specification acceptance.
SCOPE
1.1 This test method covers the detection in tricresyl phosphate of the presence of impurities that reduce potassium permanganate.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6.
1.3 For hazard information and guidance, see the supplier's Material Safety Data Sheet.
WITHDRAWN RATIONALE
This test method covers the detection in tricresyl phosphate of the presence of impurities that reduce potassium permanganate.
Fromerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications this test method was withdrawn in July 2012. This standard is being withdrawn without replacement because of lack of interest in tricresyl phosphate for coatings and ink applications.

Standard
2 pages
English language
sale 15% off

31-May-2007
30-Jun-2012
71.080.90
D01

ASTM

ASTM D796-87A(Practice)

Practice for Compression Molding Test Specimens of Phenolic Molding Compounds (Withdrawn 1992)

Standard
2 pages
English language
sale 15% off

ASTM

ASTM D1272-56(2002)(Specification)

Standard Specification for Pentachlorophenol (Withdrawn 2006)

SCOPE
1.1 This specification covers dry pentachlorophenol for use in the preservative treatment of wood.
WITHDRAWN RATIONALE
This specification covers dry pentachlorophenol for use in the preservative treatment of wood.
Formerly under the jurisdiction of Committee D07 on Wood, this test method was withdrawn without replacement in July 2006.

Technical specification
1 page
English language
sale 15% off

09-Sep-1956
12-Jul-2006
71.080.90
D07

ASTM

ASTM D2606-94(2000)(Test Method)

Standard Test Method for Solubility of Pentachlorophenol in Heavy Hydrocarbon Solvents (Withdrawn 2006)

SCOPE
1.1 This test method covers the determination of the solubility of pentachlorophenol wood preservative in heavy hydrocarbon solvent.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
WITHDRAWN RATIONALE
This test method covers the determination of the solubility of pentachlorophenol wood preservative in heavy hydrocarbon solvent.
Formerly under the jurisdiction of Committee D07 on Wood, this test method was withdrawn without replacement in July 2006.

Standard
2 pages
English language
sale 15% off

09-Jan-2000
11-Jul-2006
71.080.90
D07

ASTM

ASTM D1034-94(Specification)

Standard Specification for Fluor-Chrome-Arsenate-Phenol (Withdrawn 2000)

SCOPE
1.1 This specification covers fluor-chrome-arsenate-phenol in dry form, or in solutions for use in the preservative treatment of wood.

Technical specification
1 page
English language
sale 15% off

31-Dec-1993
09-Apr-2000
71.080.90
D07

ASTM

ASTM D1035-94(Test Method)

Standard Test Methods for Chemical Analysis of Fluor-Chrome-Arsenate-Phenol (Withdrawn 2000)

SCOPE
1.1 These test methods cover the determination of the chemical analysis of commercial fluor-chrome-arsenate-phenol.
1.1.1 Test Method D38 covers the sampling of wood preservatives prior to testing.
1.2 The analytical procedures appear in the following order: Sections Fluorine (calculated as F) 6 to 8 Arsenic (calculated as As2O3) 9 and 10 Chromium (calculated as CrO3) 11 and 12 Dinitrophenol or sodium pentachlorophenate 13 and 14
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard
3 pages
English language
sale 15% off

31-Dec-1993
09-Apr-2000
71.080.90
D07