59.100.99 - Other materials for the reinforcement of composites
ICS 59.100.99 Details
Other materials for the reinforcement of composites
Weitere Materialien fur die Verstarkung von Schichtstoffen
Autres materiaux pour le renforcement des composites
Drugi materiali za ojačitev kompozitov
General Information
Frequently Asked Questions
ICS 59.100.99 is a classification code in the International Classification for Standards (ICS) system. It covers "Other materials for the reinforcement of composites". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 6 standards classified under ICS 59.100.99 (Other materials for the reinforcement of composites). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
This Part 3 of EN 13473 is a specification of multi-axial multi-ply fabrics made from reinforcement yarns, tows, rovings, fibre fleeces, films, foams or other materials which are intended to provide reinforcement in composite materials and which is bound to a multi-ply construction. This specification defines those parameters which are required for a particular application or processing method.
The parameter specifications do not define absolute or nominal values for any parameter. The values for specified parameters are defined by the application. This specification defines the test methods which shall be used to determine the values and tolerances for each specified parameter to be controlled by the textile manufacturer.
The parameters which shall be defined in the technical specification of multi-axial multi-ply fabrics are defined in clause 4 of this Part.
- Standard6 pagesEnglish languagee-Library read for1 day
This part 1 of EN 13473 establishes a method of designation for multi-axial multi-ply fabrics which shall be used for specifications for the reinforcement of materials. The method of designation defines the structure of the multi-axial multi-ply construction and the binding system.
This designation system applies to multi-axial multi-ply fabrics made of reinforcement yarns, tows, rovings, fibre fleeces, films, foams or other materials which are intended to provide reinforcement in composite materials and which is bound to a multi-ply construction.
The designation of a multi-axial multi-ply fabric is structured in a product of multi-axial multi-ply fabrics. It is not intended that this hierarchy takes into account all the attributes of individual multi-axial multi-ply fabrics. Therefore multi-axial multi-ply fabrics having the same designation do not give necessarily the same performance. This part 1 of EN 13473 does not give engineering data, performance data or data which may be required to specify multi-axial multi-ply fabrics for a particular application or method of processing. If such additional properties are required they have to be determined in accordance with the test methods specified in EN 13473-2.
- Standard9 pagesEnglish languagee-Library read for1 day
This Part 2 of EN 13473 defines the test methods to be used to determine the designated and specified properties given in Parts 1 and 3 respectively.
Part 2 of EN 13473 defines the general requirements applicable to the specification of all types of multi-axial multi-ply fabrics falling within the scope of this specification as defined in Part 1 of this standard.
- Standard7 pagesEnglish languagee-Library read for1 day
This Part 3 of EN 13473 is a specification of multi-axial multi-ply fabrics made from reinforcement yarns, tows, rovings, fibre fleeces, films, foams or other materials which are intended to provide reinforcement in composite materials and which is bound to a multi-ply construction. This specification defines those parameters which are required for a particular application or processing method.
The parameter specifications do not define absolute or nominal values for any parameter. The values for specified parameters are defined by the application. This specification defines the test methods which shall be used to determine the values and tolerances for each specified parameter to be controlled by the textile manufacturer.
The parameters which shall be defined in the technical specification of multi-axial multi-ply fabrics are defined in clause 4 of this Part.
- Standard6 pagesEnglish languagee-Library read for1 day
This Part 2 of EN 13473 defines the test methods to be used to determine the designated and specified properties given in Parts 1 and 3 respectively.
Part 2 of EN 13473 defines the general requirements applicable to the specification of all types of multi-axial multi-ply fabrics falling within the scope of this specification as defined in Part 1 of this standard.
- Standard7 pagesEnglish languagee-Library read for1 day
This part 1 of EN 13473 establishes a method of designation for multi-axial multi-ply fabrics which shall be used for specifications for the reinforcement of materials. The method of designation defines the structure of the multi-axial multi-ply construction and the binding system.
This designation system applies to multi-axial multi-ply fabrics made of reinforcement yarns, tows, rovings, fibre fleeces, films, foams or other materials which are intended to provide reinforcement in composite materials and which is bound to a multi-ply construction.
The designation of a multi-axial multi-ply fabric is structured in a product of multi-axial multi-ply fabrics. It is not intended that this hierarchy takes into account all the attributes of individual multi-axial multi-ply fabrics. Therefore multi-axial multi-ply fabrics having the same designation do not give necessarily the same performance. This part 1 of EN 13473 does not give engineering data, performance data or data which may be required to specify multi-axial multi-ply fabrics for a particular application or method of processing. If such additional properties are required they have to be determined in accordance with the test methods specified in EN 13473-2.
- Standard9 pagesEnglish languagee-Library read for1 day