17.140.01 - Acoustic measurements and noise abatement in general

This document facilitates a standardized interpretation and a verifiably consistent software implementation of the sound propagation part of the calculation method CNOSSOS-EU:2015 according to ISO 17534-1. Other parts of CNOSSOS-EU:2015, such as the source models or the calculation method for aircraft noise, are beyond the scope of this document. This document provides an agreed interpretation of ambiguous aspects of the sound propagation part of CNOSSOS-EU:2015, a set of illustrative test cases...view more

This International Standard specifies an alternating airflow method for the determination of the airflow resistance[1] [2] of porous materials for acoustical applications.
Determination of the airflow resistance based on static flow is described in ISO 9053-1.

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one
or several building components. This document considers only laboratory measurements.
This part of ISO 10848 specifies measurement methods to be performed in a laboratory to characterize
the acoustic radiation of a building element when mechanically or acoustically excited. The measured
quantities can be used to compare products, or to express a requirement, or as input data for prediction
m...view more

This document specifies how to calculate:
— the uncertainty of sound absorption coefficients and equivalent sound absorption areas measured
according to ISO 354;
— the uncertainty of the practical and weighted sound absorption coefficients determined according
to ISO 11654;
— the uncertainty of the object sound absorption coefficient according to ISO 20189; and
— the uncertainty of the single number rating determined according to EN 1793-1.
Furthermore, the use of uncertainties in reporti...view more

EN-ISO 16283-2 specifies procedures to determine the impact sound insulation using sound pressure measurements with an impact source operating on a floor or stairs in a building. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the impact sound insulation in unfurnished or furnished rooms where the sound field may or may not approximate to a diffuse field.

This document specifies how to calculate: — the uncertainty of sound absorption coefficients and equivalent sound absorption areas measured according to ISO 354; — the uncertainty of the practical and weighted sound absorption coefficients determined according to ISO 11654; — the uncertainty of the object sound absorption coefficient according to ISO 20189; and — the uncertainty of the single number rating determined according to EN 1793‑1. Furthermore, the use of uncertainties in reporting meas...view more

This document specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for — a detailed uncertainty assessment; — a determination of uncertainties by inter-laboratory tests; — an application of uncertainties. Furthermore, typical uncertainties are given for quantities determined according to ISO 10140 (all parts), ISO 16283 (all parts) and ISO 717 (all parts).

EN-ISO 80000-8 gives names, symbols, definitions and units for quantities of acoustics. Where appropriate, conversion factors are also given.

This document applies to hearing aid fitting management (HAFM) services offered by hearing aid professionals (HAP) when providing benefit for their clients. The provision of hearing aids relies on the knowledge and practices of a hearing aid professional, to ensure the proper fitting and adequate service in the interest of the client with hearing loss. This document specifies general processes of HAFM from the client profile to the follow-up through administering, organising and controlling hear...view more

EN-ISO 389-7 in addition to ISO 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of pneumatic presses which are intended to work cold metal or material partly of cold metal. This document deals with all significant hazards relevant for pneumatic presses, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the...view more

This document provides requirements and supporting information on analysis of data collected in-situ through methods as specified in ISO/TS 12913-2.

This document specifies a relatively simple engineering method for determining the sound power levels of small, movable noise sources. The methods specified in this document are suitable for measurements of all types of noise within a specified frequency range, except impulsive noise consisting of isolated bursts of sound energy which are covered by ISO 3744 and ISO 3745.

This International Standard specifies the audio reproduction method for normalized loudness
level of audio sources for consumer equipment and systems.

ISO 3743-2:2018 specifies a relatively simple engineering method for determining the sound power levels of small, movable noise sources. The methods specified in this document are suitable for measurements of all types of noise within a specified frequency range, except impulsive noise consisting of isolated bursts of sound energy which are covered by ISO 3744 and ISO 3745.
NOTE A classification of different types of noise is given in ISO 12001.

This part of IEC 60268 specifies an acoustical measurement method that applies to electroacoustical
transducers and passive and active sound systems, such as loudspeakers, TV-sets,
multi-media devices, personal portable audio devices, automotive sound systems and
professional equipment. The device under test (DUT) can be comprised of electrical
components performing analogue and digital signal processing prior to the passive actuators
performing a transduction of the electrical input into a...view more

This document gives guidance for the use of a set of twelve basic International Standards (see Tables 1,
2 and 3) describing various methods for determining sound power levels from all types of machinery,
equipment and products. It provides guidance on the selection of one or more of these standards,
appropriate to any particular type of sound source, measurement environment and desired accuracy.
The guidance given applies to airborne sound. It is for use in the preparation of noise test cod...view more

ISO 3740:2019 gives guidance for the use of a set of twelve basic International Standards (see Tables 1, 2 and 3) describing various methods for determining sound power levels from all types of machinery, equipment and products. It provides guidance on the selection of one or more of these standards, appropriate to any particular type of sound source, measurement environment and desired accuracy. The guidance given applies to airborne sound. It is for use in the preparation of noise test codes (...view more

ISO 3740:2019 gives guidance for the use of a set of twelve basic International Standards (see Tables 1, 2 and 3) describing various methods for determining sound power levels from all types of machinery, equipment and products. It provides guidance on the selection of one or more of these standards, appropriate to any particular type of sound source, measurement environment and desired accuracy. The guidance given applies to airborne sound. It is for use in the preparation of noise test codes (...view more