ISO/TC 189/WG 6 - Installation methods

Classes A1a and B1a porcelain (as defined in ISO 13006) are now manufactured in much larger formats than previously available and are increasingly being used as an external cladding material for buildings. Classes A1b, A11a, and AIIb extruded ceramics (as defined in ISO 13006) are not covered by the scope of this document. These materials, when specifically developed for external façade applications, have been used extensively for many years and established methodologies already exist. Large format porcelain tiles or panels are generally considered to be too large to be used externally on high buildings when installed by conventional adhesive fixing methods (ISO/TR 17870-1 and ISO/TR 17870-2); therefore, mechanical fixings are used. As there are currently no published standards or guidelines for these products to be installed in this way, this document provides generic information on some typical types of mechanical fixing systems in use together with positive and negative wind load factors and typical testing procedures that can be used for evaluating anchor pull-out or edge fracture resistance. Also, because the current impact resistance test method for ceramics tiles (ISO 10545-5) relates only to traditional (bedded) installed tiling – which measures the coefficient of restitution – it is not an appropriate test for unbedded (unsupported) tiles, so alternative test methods (ISO 7892) are referred to for measuring hard-body and soft-body impact resistance. Guidance is provided regarding typical impact zones of vulnerability to hard and soft body impact and reference is made to anti-shatter mesh backings, which are sometimes applied to porcelain cladding tiles and panels. Installation systems which rely upon the chemical adhesion of metal brackets, straps or framing, etc. onto or into large format porcelain tiles or panels in conjunction with, or instead of, mechanical attachment, are not included in this document. The detailed principles for the design and construction of the substructure of ventilated façades, also known as rain screens, used on the outside of buildings, are well documented in other national and international standards and are not therefore, included in this document, other than in general reference.

ISO/TS 17870-2:2014 defines the quality of thin ceramic tiling and provides guidance for materials selection, installation, and use, to ensure that required levels of quality and performance are achieved. It considers all aspects related to the specification and installation of the tiling project, in terms of: manufacture and distribution of the materials (thin ceramic tiles and panels, adhesives, grouts, etc.); specification of the thin tiling; and installation of the tiling (thin tile fixing operations). It is applicable to internal and external thin ceramic floor and wall tiling, installed by adhesive methods.

ISO/TR 17870-1:2015 defines the quality of ceramic tiling and provides guidance for materials selection, installation and use, to achieve required levels of quality and performance. It considers aspects related to the specification and installation of the tiling project, in terms of: - manufacture and distribution of the materials (ceramic tiles, adhesives, grouts, etc.); - specification of the tiling; - installation of the tiling (tile fixing operations). It is applicable to internal and external floor and wall ceramic tiling, installed by either cement mortar or other adhesive methods. NOTE The quality of ceramic tiling depends on the following general characteristics: - regularity; - durability; - safety. The durability of the tiling can depend on its use and management.