ISO/TC 23/SC 18/WG 7 - Valves

This document specifies the general requirements and test methods for manually operated and hydraulically operated plastics valves intended for use in agricultural irrigation systems. It is applicable to manually operated and hydraulically operated plastics valves (as indicated in Table A.2) of nominal sizes DN 8 (1/4") to DN 200 (8").

This document applies to manually-activated valves only. This document specifies a test method for determining the pressure loss in agricultural irrigation valves under steady-state conditions when water flows through them. The scope and accuracy of the valve performance specifications presented will assist agricultural irrigation system designers in comparing pressure losses through various types of valves. The measurement of pressure losses provides a means for determining the relationship between pressure loss and flow rate through the valve. This document also describes the method of reporting pertinent test data. No attempt is made to define product use, design or applications. The test method is suitable for valves with equal inlet and outlet nominal sizes.

This document specifies general requirements and test methods for volumetric valves able to automatically deliver preset quantities of water. It is applicable to valves actuated by pipeline pressure and flow alone, and which do not need any other, external, source of energy. NOTE Volumetric valves are typically required to operate correctly with different qualities of irrigation water at a variety of flow rates and at temperatures between 5 °C and 50 °C.