ISO/TC 22/SC 33/WG 2 - Vehicle dynamics of passenger cars

This document specifies the general conditions that apply to vehicle ride comfort test methods. In particular, it specifies general conditions for: — variables; — measuring equipment and data processing; — environment (test track and wind velocity); — test vehicle preparation (tuning and loading); — initial driving; — test reports (general data and test conditions). These items are of general significance, regardless of the specific vehicle ride comfort test method. They apply when vehicle ride comfort properties are determined, unless other conditions are required by the standard which is actually used for the test method. This document is applicable to passenger cars as defined in ISO 3833 and light trucks. NOTE The general conditions defined in existing vehicle dynamics standards are valid until a reference to this document is included. This document mainly refers to road tests, but in many cases can be applied also for bench tests.

This document specifies open-loop test methods for determining the steady-state circular driving behaviour of passenger cars as defined in ISO 3833 and of light trucks, such behaviour being one of the factors comprising vehicle dynamics and road-holding properties. The open-loop manoeuvres included in these methods are not representative of real driving conditions, but are nevertheless useful for obtaining measures of vehicle steady-state behaviour resulting from several specific types of control inputs under closely controlled test conditions. This document specifies open-loop test methods for determining the steady-state circular driving behaviour of passenger cars as defined in ISO 3833 and of light trucks, such behaviour being one of the factors comprising vehicle dynamics and road-holding properties. The open-loop manoeuvres included in these methods are not representative of real driving conditions, but are nevertheless useful for obtaining measures of vehicle steady-state behaviour resulting from several specific types of control inputs under closely controlled test conditions.

This document specifies an open-loop test procedure to examine the effect of braking on course holding and directional behaviour of a vehicle. Specifically, the method determines how the steady-state circular response of a vehicle is altered by a braking action only. This document is applicable to passenger cars as defined in ISO 3833 and to light trucks. The open-loop manoeuvre specified in this test method is not representative of real driving conditions but is useful to obtain measures of vehicle braking behaviour resulting from control inputs under closely controlled test conditions.

This document specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods. In particular, it specifies general conditions for: — variables; — measuring equipment and data processing; — environment (test track and wind velocity); — test vehicle preparation (tuning and loading); — initial driving; and — test reports (general data and test conditions). These items are of general significance, regardless of the specific vehicle dynamics test method. They apply when vehicle dynamics properties are determined, unless other conditions are required by the standard which is actually used for the test method. This document is applicable to passenger cars as defined in ISO 3833 and light trucks. NOTE The general conditions defined in existing vehicle dynamics standards are valid until a reference to this document is included. This document is cited in many other standards without a dated reference. In the course of its revision, no change in the numbering of clauses, tables and figures is anticipated.

This document specifies the dimensions of the test track for a closed-loop test method to subjectively determine a double lane-change which is one part of the vehicle dynamics and road-holding ability of passenger cars. It is applicable to passenger cars as defined in ISO 3833. It is also applicable to light commercial vehicles up to a gross vehicle mass of 3,5 t.

ISO 9816:2018 specifies open-loop test methods to determine the reactions of a vehicle in a turn to a sudden drop in motive power resulting from release of the accelerator pedal. It applies to passenger cars as defined in ISO 3833.

ISO 13674-2:2016 specifies a test schedule that addresses a particular aspect of the transition test, the on-centre handling characteristics of a vehicle. It is applicable to passenger cars in accordance with ISO 3833 and to light trucks, N1 category. NOTE The manoeuvre specified in this test method is not representative of real driving conditions, but is useful for obtaining measures of vehicle on-centre handling behaviour in response to a specific type of steering input under closely controlled test conditions. Other aspects of on-centre handling are addressed in the companion ISO 13674‑1.

ISO 7401:2011 specifies open-loop test methods for determining the transient response behaviour of road vehicles. It is applicable to passenger cars, as defined in ISO 3833, and to light trucks.

ISO 3888-2:2011 defines the dimensions of the test track for a closed-loop, severe lane-change manoeuvre test for subjectively determining the obstacle avoidance performance of a vehicle, one specific part of vehicle dynamics and road-holding ability. It is applicable to passenger cars as defined in ISO 3833 and light commercial vehicles up to a gross vehicle mass of 3,5 t.

ISO 17288-2:2011 specifies a procedure for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering pulse input, starting from a straight-ahead, steady-state status.

ISO 17288-1:2011 specifies an open-loop test method for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering release, starting from a steady-state cornering status.

ISO 12021:2011 specifies an open-loop test method to determine the sensitivity to lateral wind of a vehicle by means of a wind generator. It applies to passenger cars as defined in ISO 3833, passenger car-trailer combinations and light trucks. Its applicability to motorcycles is yet to be investigated. The test conditions specified in this test method are not representative of real driving conditions but are useful to obtain measures of vehicle dynamic response to lateral wind.

ISO 9815:2010 specifies a lateral stability test for passenger-car and trailer combinations. It is applicable to passenger cars in accordance with ISO 3833, and also to light trucks, and their trailer combinations. The lateral stability test determines the damping characteristic of the yaw oscillation of such towing-vehicle–trailer combinations excited by a defined steering impulse. The combination is initially driven in a steady-state, straight-ahead driving condition. Oscillation of the vehicle is then initiated by the application of a single impulse of steering, followed by a period in which steering is held fixed and the oscillation of the combination is allowed to damp out. Testing is conducted at several constant speeds. Where non-periodic instability is of interest, a steady-state circular test is specified.

This International Standard describes an open-loop test method for determining vehicle reactions during a straightline braking manoeuvre on a surface having a split coefficient of friction. It applies to passenger cars as defined in ISO 3833. The method is valid for all braking efforts up to full ABS operation for vehicles so equipped, or just up to the locking limit of the wheels on the high-friction surface for vehicles without ABS.

ISO 4138:2012 specifies open-loop test methods for determining the steady-state circular driving behaviour of passenger cars as defined in ISO 3833 and of light trucks, such behaviour being one of the factors comprising vehicle dynamics and road-holding properties. The open-loop manoeuvres included in these methods are not representative of real driving conditions, but are nevertheless useful for obtaining measures of vehicle steady-state behaviour resulting from several specific types of control inputs under closely controlled test conditions.

ISO 13674-1:2010 specifies a test schedule that addresses a particular aspect of the on-centre handling characteristics of a vehicle: the weave test. It is applicable to passenger cars in accordance with ISO 3833, and to light trucks.

ISO 21944:2007 specifies an open-loop test method to determine the stopping distance of a vehicle during a straight-line braking manoeuvre, with the Anti-lock Braking System (ABS) fully engaged. It applies to passenger cars as defined in ISO 3833 and light trucks. ISO 21944:2007 specifies a reference method and is especially designed to ensure high repeatability.

ISO 13674-2:2006 specifies a test schedule that addresses the transition test, a particular aspect of the on-centre handling characteristics of a vehicle. It is applicable to passenger cars in accordance with ISO 3833, and to light trucks.

ISO 9816:2006 specifies open-loop test methods to determine the reactions of a vehicle in a turn to a sudden drop in motive power resulting from release of the accelerator pedal. It applies to passenger cars as defined in ISO 3833. The open-loop manoeuvre specified in this test method is not representative of real driving conditions, but is useful to obtain measures of a vehicle's power-off behaviour resulting from specific types of control inputs under closely controlled test conditions.

ISO 15037-1:2006 specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods. In particular, it specifies general conditions for: variables, measuring equipment and data processing, environment (test track and wind velocity), test vehicle preparation (tuning and loading), initial driving, and test reports (general data and test conditions). ISO 15037-1:2006 is applicable to passenger cars as defined in ISO 3833 and light trucks.

ISO 7975:2006 specifies an open-loop test procedure to examine the effect of braking on course holding and directional behaviour of a vehicle. Specifically, the procedure determines how the steady-state circular response of a vehicle is altered by a braking action only. ISO 7975:2006 applies to passenger cars as defined in ISO 3833 and to light trucks. The open-loop manoeuvre specified in this test procedure is not representative of real driving conditions but is useful to obtain measures of vehicle braking behaviour resulting from control inputs under closely controlled test conditions.