MT 401 - TC 105/MT 401

IEC 62282-5-100:2018 covers construction, marking and test requirements for portable fuel cell power systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of the portable fuel cell power system is to produce electrical power. This document applies to AC and DC type portable fuel cell power systems, with a rated output voltage not exceeding 600 V AC, or 850 V DC for indoor and outdoor use.

Covers construction, marking and test requirements for a.c. and d.c. type portable fuel cell systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of a portable fuel cell system is to produce useable power.

IEC 62282-5-1:2012 covers construction, marking and test requirements for portable fuel cell power systems intended to produce electrical power. Applies to a.c. and d.c. type portable fuel cell power systems, with a rated output voltage not exceeding 600 V a.c., or 850 V d.c. for indoor and outdoor use. The major technical changes with respect to the first edition are as follows:
- referencing an alternative test method; reduction of the limit on flammable atmospheres;
- consideration of additional effluents and criteria to establish if a system is suitable for indoor or outdoor operation;
- revision of specific criteria for oxygen detector sensor performance;
- new test method and new drop heights; addition of a table giving limits on emission of effluents.
Keywords: fuel cell