WG 10 - TC 45/SC 45A/WG 10

IEC/IEEE 62582-4:2022 is available as IEC/IEEE 62582-4:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC/IEEE 62582-4:2022 specifies methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using oxidation induction techniques in the detail necessary to produce accurate and reproducible measurements. It includes the requirements for sample preparation, the measurement system and conditions, and the reporting of the measurement results. This second edition cancels and replaces the first edition published in 2011, and its Amendment 1:2016. This edition includes the following significant technical changes with respect to the previous edition:
- Consideration of publication of IEC/IEEE 60780-323;
- An example added in Annex B and update;
- Annex C added.

IEC/IEEE 62582-2:2022 is available as IEC/IEEE 62582-2:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC/IEEE 62582-2:2022 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using the indenter measurement technique in the detail necessary to produce accurate and reproducible measurements. It includes the requirements for the selection of samples, the measurement system and measurement conditions, and the reporting of the measurement results. This document is intended for application to non-energised equipment. This document is published as an IEC/IEEE Dual Logo standard. This second edition cancels and replaces the first edition published in 2011, and its Amendment 1:2016. This edition includes the following significant technical changes with respect to the previous edition:
- Modification of the title;
- Consideration of publication of IEC/IEEE 60780-323.

IEC/IEEE 62582-6:2019 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control cables using insulation resistance measurements in the detail necessary to produce accurate and reproducible results during simulated accident conditions. It includes the requirements for the measurement system and measurement procedure, and the reporting of the measurement results.
NOTE Measurement of insulation resistance during simulated accident conditions with the aim of determining the lowest value during the accident in order to assess cable performance involves special requirements given in this document. Methods for measurement under stable (non-accident) conditions are available in other international standards, e.g. IEC 62631-3-3.
The different parts of the IEC/IEEE 62582 series are measurement standards, primarily for use in the management of ageing in initial qualification and after installation. IEC/IEEE 62582-1 includes requirements for the application of the other parts of the IEC/IEEE 62582 series and some elements which are common to all methods. Information on the role of condition monitoring in qualification of equipment important to safety is found in IEC/IEEE 60780-323.

IEC 62765-2:2019 identifies minimum requirements and applicable practices for correcting and preventing any potential impacts on nuclear power plant (NPP) safety due to the ageing of temperature sensors, such as NPP resistance temperature detectors (RTDs) and thermocouples (TCs).
This document provides strategies, technical requirements, and recommended practices for the management of the ageing of temperature sensors important to safety in nuclear power plants (NPPs) to ensure that ageing can be identified and that suitable remedial actions are undertaken as necessary to demonstrate that the safety of the plant will not be impaired. This document is aligned with IEC 62342, which provides guidance on ageing management for instrumentation and control (I&C) systems important to safety in NPPs

IEC/IEEE 62582-5:2015 contains methods for monitoring the attenuation condition of optical fibres and cables in instrumentation and control systems using optical time domain reflectometer measurements in the detail necessary to produce accurate and reproducible measurements. It includes the requirements for the measurement system and conditions, and the reporting of the measurement results.

IEC 62765-1:2015 provides strategies, technical requirements, and recommended practices for the management of ageing to ensure that ageing of pressure transmitters important to safety in nuclear power plants (NPPs) can be identified and that suitable remedial actions are undertaken as necessary to demonstrate that the safety of the plant will not be impaired. This standard is aligned with IEC 62342, which provides guidance on ageing management for I&C systems important to safety in NPPs. This standard, IEC 62765-1, is the first part for pressure transmitters in the IEC 62765 sensor and transmitter series for pressure, temperature, neutron and other sensors.

IEC/IEEE 62582-3:2012 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using tensile elongation techniques in the detail necessary to produce accurate and reproducible measurements. It includes the requirements for selection of samples, the measurement system and conditions, and the reporting of the measurement results.

IEC/IEEE 62582-2:2011 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using the indenter modulus technique in the detail necessary to produce accurate and reproducible measurements. It includes the requirements for the selection of samples, the measurement system and measurement conditions, and the reporting of the measurement results.

IEC/IEEE 62582-1:2011 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods.

IEC/IEEE 62582-4:2011 specifies methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using oxidation induction techniques in the detail necessary to produce accurate and reproducible measurements. It includes the requirements for sample preparation, the measurement system and conditions, and the reporting of the measurement results.

IEC 62465:2010 provides strategies, technical requirements, and recommended practices for the management of normal ageing of cabling systems that are important to safety in nuclear power plants. The main requirements are presented in the body of this International Standard followed by a number of informative annexes with examples of cable testing techniques, procedures, and equipment that are available for the nuclear industry to use to ensure that ageing degradation will not impact plant safety.
This publication contains colours which are considered to be useful for the correct understanding of its contents.

IEC/TR 62096:2009 is intended to support owners of a nuclear power plant in the decision-making process and in the preparation for partial or complete modernization of the I&C. For this, it provides a summary of the motivating factors for I&C modernization, the principal options for the elaboration of different scenarios for I&C modernization, the technical and economic criteria for the selection of a long term I&C strategy, the principal aspects to be taken into account for a detailed technical feasibility study. This new edition includes the following significant technical changes with respect to the previous edition:
- update on references, taking into account standards published since the previous edition;
- update on the terminology, incorporation of a number of clarifications proposed by National Committees.

Provides strategies, technical requirements, and recommendations for the management of ageing of nuclear power plant instrumentation and control systems and associated equipment. Also includes annexes on test methods, procedures, and technologies that may be used to verify proper operation of such equipment and aim to prevent ageing degradation from having any adverse impact on the plant safety, efficiency, or reliability. Applies to all types of nuclear power plants and relates primarily to safety.